Message-ID: <20230424-canon-primal-ece722b184d4-mkl@pengutronix.de>
Date:   Mon, 24 Apr 2023 22:14:53 +0200
From:   Marc Kleine-Budde <mkl@...gutronix.de>
To:     Judith Mendez <jm@...com>
Cc:     Chandrasekar Ramakrishnan <rcsekar@...sung.com>,
        Wolfgang Grandegger <wg@...ndegger.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        "David S . Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>, linux-can@...r.kernel.org,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        Schuyler Patton <spatton@...com>, Nishanth Menon <nm@...com>,
        Vignesh Raghavendra <vigneshr@...com>,
        Tero Kristo <kristo@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        Oliver Hartkopp <socketcan@...tkopp.net>
Subject: Re: [PATCH v2 1/4] can: m_can: Add hrtimer to generate software
 interrupt

On 24.04.2023 14:53:59, Judith Mendez wrote:
> Add an hrtimer to MCAN class device. Each MCAN will have its own
> hrtimer instantiated if there is no hardware interrupt found and
> poll-interval property is defined in device tree M_CAN node.
> 
> The hrtimer will generate a software interrupt every 1 ms. In
> hrtimer callback, we check if there is a transaction pending by
> reading a register, then process by calling the isr if there is.
> 
> Signed-off-by: Judith Mendez <jm@...com>
> ---
> Changelog:
> v2:
> 	1. Add poll-interval to MCAN class device to check if poll-interval propery is
> 	present in MCAN node, this enables timer polling method.
> 	2. Add 'polling' flag to MCAN class device to check if a device is using timer
> 	polling method
> 	3. Check if both timer polling and hardware interrupt are enabled for a MCAN
> 	device, default to hardware interrupt mode if both are enabled.
> 	4. Changed ms_to_ktime() to ns_to_ktime()
> 	5. Removed newlines, tabs, and restructure if/else section.
> 
>  drivers/net/can/m_can/m_can.c          | 30 ++++++++++++++++++++-----
>  drivers/net/can/m_can/m_can.h          |  5 +++++
>  drivers/net/can/m_can/m_can_platform.c | 31 ++++++++++++++++++++++++--
>  3 files changed, 59 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
> index a5003435802b..33e094f88da1 100644
> --- a/drivers/net/can/m_can/m_can.c
> +++ b/drivers/net/can/m_can/m_can.c
> @@ -23,6 +23,7 @@
>  #include <linux/pinctrl/consumer.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/hrtimer.h>

keep the list of includes sorted

>  
>  #include "m_can.h"
>  
> @@ -1587,6 +1588,11 @@ static int m_can_close(struct net_device *dev)
>  	if (!cdev->is_peripheral)
>  		napi_disable(&cdev->napi);
>  
> +	if (cdev->polling) {
> +		dev_dbg(cdev->dev, "Disabling the hrtimer\n");
> +		hrtimer_cancel(&cdev->hrtimer);
> +	}
> +
>  	m_can_stop(dev);
>  	m_can_clk_stop(cdev);
>  	free_irq(dev->irq, dev);
> @@ -1793,6 +1799,18 @@ static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
>  	return NETDEV_TX_OK;
>  }
>  
> +enum hrtimer_restart hrtimer_callback(struct hrtimer *timer)
> +{
> +	struct m_can_classdev *cdev =
> +		container_of(timer, struct m_can_classdev, hrtimer);
> +
> +	m_can_isr(0, cdev->net);
> +
> +	hrtimer_forward_now(timer, ms_to_ktime(1));

Please create a define for this

> +
> +	return HRTIMER_RESTART;
> +}
> +
>  static int m_can_open(struct net_device *dev)
>  {
>  	struct m_can_classdev *cdev = netdev_priv(dev);
> @@ -1827,13 +1845,15 @@ static int m_can_open(struct net_device *dev)
>  		}
>  
>  		INIT_WORK(&cdev->tx_work, m_can_tx_work_queue);
> -
>  		err = request_threaded_irq(dev->irq, NULL, m_can_isr,
> -					   IRQF_ONESHOT,
> -					   dev->name, dev);
> -	} else {
> -		err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name,
> +					   IRQF_ONESHOT, dev->name, dev);
> +	} else if (!cdev->polling) {
> +			err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name,
>  				  dev);

No need to change the indention

> +	} else {
> +		dev_dbg(cdev->dev, "Start hrtimer\n");
> +		cdev->hrtimer.function = &hrtimer_callback;
> +		hrtimer_start(&cdev->hrtimer, ms_to_ktime(cdev->poll_interval), HRTIMER_MODE_REL_PINNED);
>  	}
>  
>  	if (err < 0) {
> diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h
> index a839dc71dc9b..1ba87eb23f8e 100644
> --- a/drivers/net/can/m_can/m_can.h
> +++ b/drivers/net/can/m_can/m_can.h
> @@ -28,6 +28,7 @@
>  #include <linux/pm_runtime.h>
>  #include <linux/slab.h>
>  #include <linux/uaccess.h>
> +#include <linux/hrtimer.h>

keep the list of includes sorted

>  
>  /* m_can lec values */
>  enum m_can_lec_type {
> @@ -93,6 +94,10 @@ struct m_can_classdev {
>  	int is_peripheral;
>  
>  	struct mram_cfg mcfg[MRAM_CFG_NUM];
> +
> +	struct hrtimer hrtimer;
> +	u32 poll_interval;
> +	u8 polling;

bool

>  };
>  
>  struct m_can_classdev *m_can_class_allocate_dev(struct device *dev, int sizeof_priv);
> diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
> index 9c1dcf838006..e899c04edc01 100644
> --- a/drivers/net/can/m_can/m_can_platform.c
> +++ b/drivers/net/can/m_can/m_can_platform.c
> @@ -7,6 +7,7 @@
>  
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
> +#include <linux/hrtimer.h>
>  
>  #include "m_can.h"
>  
> @@ -97,11 +98,37 @@ static int m_can_plat_probe(struct platform_device *pdev)
>  
>  	addr = devm_platform_ioremap_resource_byname(pdev, "m_can");
>  	irq = platform_get_irq_byname(pdev, "int0");

use platform_get_irq_byname_optional(), it doesn't print an error
message.

> -	if (IS_ERR(addr) || irq < 0) {
> -		ret = -EINVAL;
> +	if (irq == -EPROBE_DEFER) {
> +		ret = -EPROBE_DEFER;
>  		goto probe_fail;
>  	}
>  
> +	if (IS_ERR(addr)) {
> +		ret = PTR_ERR(addr);
> +		goto probe_fail;
> +	}

please move the error check for "addr" directly after the "addr = "
assignment.

> +
> +	mcan_class->polling = 0;

No need to init as "0"

> +	if (device_property_present(mcan_class->dev, "poll-interval")) {
> +		mcan_class->polling = 1;
> +	}

No need for the { } here.

> +
> +	if (!mcan_class->polling && irq < 0) {
> +		ret = -ENODATA;
-ENXIO
> +		dev_dbg(mcan_class->dev, "Polling not enabled\n");

print a proper error message using dev_err_probe("IRQ %s not found and
polling not activated\n")

> +		goto probe_fail;
> +	}
> +
> +	if (mcan_class->polling && irq > 0) {
> +		mcan_class->polling = 0;
> +		dev_dbg(mcan_class->dev, "Polling not enabled, hardware interrupt exists\n");
> +	}
> +
> +	if (mcan_class->polling && irq < 0) {
> +		dev_dbg(mcan_class->dev, "Polling enabled, initialize hrtimer");
> +		hrtimer_init(&mcan_class->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_PINNED);
> +	}

combine both if (mcan_class->polling) into one.

> +
>  	/* message ram could be shared */
>  	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
>  	if (!res) {
> -- 
> 2.17.1
> 
> 

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |

Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)

Powered by blists - more mailing lists