linux-kernel - [PATCH] xhci-pci: Only run d3cold avoidance quirk for s2idle

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 24 Apr 2023 08:49:25 -0500
From:   Mario Limonciello <mario.limonciello@....com>
To:     Mathias Nyman <mathias.nyman@...el.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Mario Limonciello <mario.limonciello@....com>
CC:     Natikar Basavaraj <Basavaraj.Natikar@....com>,
        Donghun Yoon <donghun.yoon@....com>,
        <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH] xhci-pci: Only run d3cold avoidance quirk for s2idle

Donghun reports that a notebook that has an AMD Ryzen 5700U but supports
S3 has problems with USB after resuming from suspend. The issue was
bisected down to commit d1658268e439 ("usb: pci-quirks: disable D3cold on
xhci suspend for s2idle on AMD Renoir").

As this issue only happens on S3, narrow the broken D3cold quirk to only
run in s2idle.

Fixes: d1658268e439 ("usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir")
Reported-and-tested-by: Donghun Yoon <donghun.yoon@....com>
Signed-off-by: Mario Limonciello <mario.limonciello@....com>
---
 drivers/usb/host/xhci-pci.c | 7 +++++--
 drivers/usb/host/xhci.h     | 2 +-
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index fb988e4ea924..c2c850e8abc2 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/acpi.h>
 #include <linux/reset.h>
+#include <linux/suspend.h>
 
 #include "xhci.h"
 #include "xhci-trace.h"
@@ -194,7 +195,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 
 	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
 		pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI)
-		xhci->quirks |= XHCI_BROKEN_D3COLD;
+		xhci->quirks |= XHCI_BROKEN_D3COLD_S2I;
 
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
 		xhci->quirks |= XHCI_LPM_SUPPORT;
@@ -609,7 +610,9 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 	 * Systems with the TI redriver that loses port status change events
 	 * need to have the registers polled during D3, so avoid D3cold.
 	 */
-	if (xhci->quirks & (XHCI_COMP_MODE_QUIRK | XHCI_BROKEN_D3COLD))
+	if (xhci->quirks & XHCI_COMP_MODE_QUIRK ||
+	    (pm_suspend_target_state == PM_SUSPEND_TO_IDLE &&
+	     xhci->quirks & (XHCI_BROKEN_D3COLD_S2I)))
 		pci_d3cold_disable(pdev);
 
 	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 786002bb35db..3818359603cc 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1901,7 +1901,7 @@ struct xhci_hcd {
 #define XHCI_DISABLE_SPARSE	BIT_ULL(38)
 #define XHCI_SG_TRB_CACHE_SIZE_QUIRK	BIT_ULL(39)
 #define XHCI_NO_SOFT_RETRY	BIT_ULL(40)
-#define XHCI_BROKEN_D3COLD	BIT_ULL(41)
+#define XHCI_BROKEN_D3COLD_S2I	BIT_ULL(41)
 #define XHCI_EP_CTX_BROKEN_DCS	BIT_ULL(42)
 #define XHCI_SUSPEND_RESUME_CLKS	BIT_ULL(43)
 #define XHCI_RESET_TO_DEFAULT	BIT_ULL(44)
-- 
2.34.1