[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <31d1d1e4-2f75-bbbd-3e4b-6c796f2d39d1@baylibre.com>
Date: Tue, 25 Apr 2023 13:46:42 +0200
From: Alexandre Mergnat <amergnat@...libre.com>
To: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>, matthias.bgg@...il.com
Cc: robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, kernel@...labora.com,
Chen-Yu Tsai <wenst@...omium.org>
Subject: Re: [PATCH v2 1/4] arm64: dts: mediatek: cherry: Add platform thermal
configuration
On 24/04/2023 13:25, AngeloGioacchino Del Regno wrote:
> This platform has three auxiliary NTC thermistors, connected to the
> SoC's ADC pins. Enable the auxadc in order to be able to read the
> ADC values, add a generic-adc-thermal LUT for each and finally assign
> them to the SoC's thermal zones.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
> Tested-by: Chen-Yu Tsai <wenst@...omium.org>
> Reviewed-by: Chen-Yu Tsai <wenst@...omium.org>
> ---
> .../boot/dts/mediatek/mt8195-cherry.dtsi | 105 ++++++++++++++++++
> 1 file changed, 105 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
> index 8ac80a136c37..4229f4f7dc2f 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
> @@ -114,6 +114,77 @@ ppvar_sys: regulator-ppvar-sys {
> regulator-boot-on;
> };
>
> + /* Murata NCP03WF104F05RL */
> + tboard_thermistor1: thermal-sensor-t1 {
> + compatible = "generic-adc-thermal";
> + #thermal-sensor-cells = <0>;
> + io-channels = <&auxadc 0>;
> + io-channel-names = "sensor-channel";
> + temperature-lookup-table = < (-10000) 1553
> + (-5000) 1485
> + 0 1406
> + 5000 1317
> + 10000 1219
> + 15000 1115
> + 20000 1007
> + 25000 900
> + 30000 796
> + 35000 697
> + 40000 605
> + 45000 523
> + 50000 449
> + 55000 384
> + 60000 327
> + 65000 279
> + 70000 237
> + 75000 202
> + 80000 172
> + 85000 147
> + 90000 125
> + 95000 107
> + 100000 92
> + 105000 79
> + 110000 68
> + 115000 59
> + 120000 51
> + 125000 44>;
> + };
> +
> + tboard_thermistor2: thermal-sensor-t2 {
> + compatible = "generic-adc-thermal";
> + #thermal-sensor-cells = <0>;
> + io-channels = <&auxadc 1>;
> + io-channel-names = "sensor-channel";
> + temperature-lookup-table = < (-10000) 1553
> + (-5000) 1485
> + 0 1406
> + 5000 1317
> + 10000 1219
> + 15000 1115
> + 20000 1007
> + 25000 900
> + 30000 796
> + 35000 697
> + 40000 605
> + 45000 523
> + 50000 449
> + 55000 384
> + 60000 327
> + 65000 279
> + 70000 237
> + 75000 202
> + 80000 172
> + 85000 147
> + 90000 125
> + 95000 107
> + 100000 92
> + 105000 79
> + 110000 68
> + 115000 59
> + 120000 51
> + 125000 44>;
> + };
> +
> usb_vbus: regulator-5v0-usb-vbus {
> compatible = "regulator-fixed";
> regulator-name = "usb-vbus";
> @@ -260,6 +331,10 @@ &gpu {
> mali-supply = <&mt6315_7_vbuck1>;
> };
>
> +&auxadc {
Can you put it in alphabetical order please. ?
> + status = "okay";
> +};
> +
> &i2c0 {
> status = "okay";
>
> @@ -1098,6 +1173,36 @@ mt6315_7_vbuck1: vbuck1 {
> };
> };
>
> +&thermal_zones {
> + soc-area-thermal {
> + polling-delay = <1000>;
> + polling-delay-passive = <250>;
> + thermal-sensors = <&tboard_thermistor1>;
> +
> + trips {
> + trip-crit {
> + temperature = <84000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + pmic-area-thermal {
> + polling-delay = <1000>;
> + polling-delay-passive = <0>;
> + thermal-sensors = <&tboard_thermistor2>;
> +
> + trips {
> + trip-crit {
> + temperature = <84000>;
> + hysteresis = <1000>;
> + type = "critical";
> + };
> + };
> + };
> +};
> +
> &u3phy0 {
> status = "okay";
> };
After that:
Reviewed-by: Alexandre Mergnat <amergnat@...libre.com>
Regards,
Alexandre
Powered by blists - more mailing lists