[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230425133223.4060752-1-s-vadapalli@ti.com>
Date: Tue, 25 Apr 2023 19:02:20 +0530
From: Siddharth Vadapalli <s-vadapalli@...com>
To: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>,
<robh+dt@...nel.org>, <krzysztof.kozlowski@...aro.org>,
<krzysztof.kozlowski+dt@...aro.org>, <afd@...com>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <srk@...com>,
<s-vadapalli@...com>
Subject: [RFC PATCH 0/3] Add CPSW9G DT support for J784S4
Hello,
This series adds device-tree nodes for CPSW9G instance of the CPSW
Ethernet Switch on TI's J784S4 SoC. Additionally, two device-tree
overlays are also added:
1. QSGMII mode with the CPSW9G instance via the ENET EXPANSION 1
connector.
2. USXGMII mode with MAC Ports 1 and 2 of the CPSW9G instance via
ENET EXPANSION 1 and 2 connectors, configured in fixed-link
mode of operation at 5Gbps link speed.
This series is based on top of the following series:
https://lore.kernel.org/r/20230425131607.290707-1-j-choudhary@ti.com/
This series also depends on the patch for Serdes Mux Bindings at:
https://lore.kernel.org/r/20230310111630.743023-1-s-vadapalli@ti.com/
for patches 2/3 and 3/3.
Regards,
Siddharth.
---
Siddharth Vadapalli (3):
arm64: dts: ti: k3-j784s4-main: Add CPSW9G nodes
arm64: dts: ti: k3-j784s4: Add overlay to enable QSGMII mode with
CPSW9G
arm64: dts: ti: k3-j784s4: Add overlay for dual port USXGMII mode
arch/arm64/boot/dts/ti/Makefile | 3 +
.../ti/k3-j784s4-evm-quad-port-eth-exp1.dtso | 142 ++++++++++++++++++
.../ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso | 72 +++++++++
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 114 ++++++++++++++
4 files changed, 331 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso
create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso
--
2.25.1
Powered by blists - more mailing lists