lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZEfsCit0XX8zqUIJ@makrotopia.org>
Date:   Tue, 25 Apr 2023 16:04:42 +0100
From:   Daniel Golle <daniel@...rotopia.org>
To:     arinc9.unal@...il.com
Cc:     Sean Wang <sean.wang@...iatek.com>,
        Landen Chao <Landen.Chao@...iatek.com>,
        DENG Qingfang <dqfext@...il.com>, Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>,
        Russell King <linux@...linux.org.uk>,
        Arınç ÜNAL <arinc.unal@...nc9.com>,
        Richard van Schagen <richard@...terhints.com>,
        Richard van Schagen <vschagen@...com>,
        Frank Wunderlich <frank-w@...lic-files.de>,
        Bartel Eerdekens <bartel.eerdekens@...stell8.be>,
        erkin.bozoglu@...ont.com, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH net-next 04/24] net: dsa: mt7530: properly support
 MT7531AE and MT7531BE

On Tue, Apr 25, 2023 at 11:29:13AM +0300, arinc9.unal@...il.com wrote:
> From: Arınç ÜNAL <arinc.unal@...nc9.com>
> 
> Introduce the p5_sgmii pointer to store the information for whether port 5
> has got SGMII or not.

The p5_sgmii your are introducing to struct mt7530_priv is a boolean
variable, and not a pointer.

> 
> Move the comment about MT7531AE and MT7531BE to mt7531_setup(), where the
> switch is identified.
> 
> Get rid of mt7531_dual_sgmii_supported() now that priv->p5_sgmii stores the
> information. Address the code where mt7531_dual_sgmii_supported() is used.
> 
> Get rid of mt7531_is_rgmii_port() which just prints the opposite of
> priv->p5_sgmii.
> 
> Remove P5_INTF_SEL_GMAC5_SGMII. The p5_interface_select enum is supposed to
> represent the mode that port 5 is being used in, not the hardware
> information of port 5. Set p5_intf_sel to P5_INTF_SEL_GMAC5 instead, if
> port 5 is not dsa_is_unused_port().
> 
> Signed-off-by: Arınç ÜNAL <arinc.unal@...nc9.com>
> ---

Other than the comment above this change makes sense and looks good to
me, so once you correct the commit message, you may add my Acked-by.

>  drivers/net/dsa/mt7530-mdio.c |  7 ++----
>  drivers/net/dsa/mt7530.c      | 43 ++++++++++++-----------------------
>  drivers/net/dsa/mt7530.h      |  6 +++--
>  3 files changed, 21 insertions(+), 35 deletions(-)
> 
> diff --git a/drivers/net/dsa/mt7530-mdio.c b/drivers/net/dsa/mt7530-mdio.c
> index 088533663b83..fa3ee85a99c1 100644
> --- a/drivers/net/dsa/mt7530-mdio.c
> +++ b/drivers/net/dsa/mt7530-mdio.c
> @@ -81,17 +81,14 @@ static const struct regmap_bus mt7530_regmap_bus = {
>  };
>  
>  static int
> -mt7531_create_sgmii(struct mt7530_priv *priv, bool dual_sgmii)
> +mt7531_create_sgmii(struct mt7530_priv *priv)
>  {
>  	struct regmap_config *mt7531_pcs_config[2] = {};
>  	struct phylink_pcs *pcs;
>  	struct regmap *regmap;
>  	int i, ret = 0;
>  
> -	/* MT7531AE has two SGMII units for port 5 and port 6
> -	 * MT7531BE has only one SGMII unit for port 6
> -	 */
> -	for (i = dual_sgmii ? 0 : 1; i < 2; i++) {
> +	for (i = priv->p5_sgmii ? 0 : 1; i < 2; i++) {
>  		mt7531_pcs_config[i] = devm_kzalloc(priv->dev,
>  						    sizeof(struct regmap_config),
>  						    GFP_KERNEL);
> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
> index 7d9f9563dbda..29abf2745294 100644
> --- a/drivers/net/dsa/mt7530.c
> +++ b/drivers/net/dsa/mt7530.c
> @@ -473,15 +473,6 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
>  	return 0;
>  }
>  
> -static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv)
> -{
> -	u32 val;
> -
> -	val = mt7530_read(priv, MT7531_TOP_SIG_SR);
> -
> -	return (val & PAD_DUAL_SGMII_EN) != 0;
> -}
> -
>  static int
>  mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
>  {
> @@ -496,7 +487,7 @@ mt7531_pll_setup(struct mt7530_priv *priv)
>  	u32 xtal;
>  	u32 val;
>  
> -	if (mt7531_dual_sgmii_supported(priv))
> +	if (priv->p5_sgmii)
>  		return;
>  
>  	val = mt7530_read(priv, MT7531_CREV);
> @@ -907,8 +898,6 @@ static const char *p5_intf_modes(unsigned int p5_interface)
>  		return "PHY P4";
>  	case P5_INTF_SEL_GMAC5:
>  		return "GMAC5";
> -	case P5_INTF_SEL_GMAC5_SGMII:
> -		return "GMAC5_SGMII";
>  	default:
>  		return "unknown";
>  	}
> @@ -2440,6 +2429,12 @@ mt7531_setup(struct dsa_switch *ds)
>  		return -ENODEV;
>  	}
>  
> +	/* MT7531AE has got two SGMII units. One for port 5, one for port 6.
> +	 * MT7531BE has got only one SGMII unit which is for port 6.
> +	 */
> +	val = mt7530_read(priv, MT7531_TOP_SIG_SR);
> +	priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN);
> +
>  	/* all MACs must be forced link-down before sw reset */
>  	for (i = 0; i < MT7530_NUM_PORTS; i++)
>  		mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK);
> @@ -2451,19 +2446,16 @@ mt7531_setup(struct dsa_switch *ds)
>  
>  	mt7531_pll_setup(priv);
>  
> -	if (mt7531_dual_sgmii_supported(priv)) {
> -		priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII;
> -
> +	if (priv->p5_sgmii) {
>  		/* Let ds->slave_mii_bus be able to access external phy. */
>  		mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK,
>  			   MT7531_EXT_P_MDC_11);
>  		mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK,
>  			   MT7531_EXT_P_MDIO_12);
> -	} else {
> -		priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
>  	}
> -	dev_dbg(ds->dev, "P5 support %s interface\n",
> -		p5_intf_modes(priv->p5_intf_sel));
> +
> +	if (!dsa_is_unused_port(ds, 5))
> +		priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
>  
>  	mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
>  		   MT7531_GPIO0_INTERRUPT);
> @@ -2523,11 +2515,6 @@ static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port,
>  	}
>  }
>  
> -static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port)
> -{
> -	return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII);
> -}
> -
>  static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port,
>  				     struct phylink_config *config)
>  {
> @@ -2540,7 +2527,7 @@ static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port,
>  		break;
>  
>  	case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */
> -		if (mt7531_is_rgmii_port(priv, port)) {
> +		if (!priv->p5_sgmii) {
>  			phy_interface_set_rgmii(config->supported_interfaces);
>  			break;
>  		}
> @@ -2607,7 +2594,7 @@ static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
>  {
>  	u32 val;
>  
> -	if (!mt7531_is_rgmii_port(priv, port)) {
> +	if (priv->p5_sgmii) {
>  		dev_err(priv->dev, "RGMII mode is not available for port %d\n",
>  			port);
>  		return -EINVAL;
> @@ -2860,7 +2847,7 @@ mt7531_cpu_port_config(struct dsa_switch *ds, int port)
>  
>  	switch (port) {
>  	case 5:
> -		if (mt7531_is_rgmii_port(priv, port))
> +		if (!priv->p5_sgmii)
>  			interface = PHY_INTERFACE_MODE_RGMII;
>  		else
>  			interface = PHY_INTERFACE_MODE_2500BASEX;
> @@ -3019,7 +3006,7 @@ mt753x_setup(struct dsa_switch *ds)
>  		mt7530_free_irq_common(priv);
>  
>  	if (priv->create_sgmii) {
> -		ret = priv->create_sgmii(priv, mt7531_dual_sgmii_supported(priv));
> +		ret = priv->create_sgmii(priv);
>  		if (ret && priv->irq)
>  			mt7530_free_irq(priv);
>  	}
> diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
> index 415d8ea07472..2602c95fd3a5 100644
> --- a/drivers/net/dsa/mt7530.h
> +++ b/drivers/net/dsa/mt7530.h
> @@ -679,7 +679,6 @@ enum p5_interface_select {
>  	P5_INTF_SEL_PHY_P0,
>  	P5_INTF_SEL_PHY_P4,
>  	P5_INTF_SEL_GMAC5,
> -	P5_INTF_SEL_GMAC5_SGMII,
>  };
>  
>  struct mt7530_priv;
> @@ -749,6 +748,8 @@ struct mt753x_info {
>   * @p6_interface:	Holding the current port 6 interface
>   * @p5_interface:	Holding the current port 5 interface
>   * @p5_intf_sel:	Holding the current port 5 interface select
> + * @p5_sgmii:		Flag for distinguishing if port 5 of the MT7531 switch
> + *			has got SGMII
>   * @irq:		IRQ number of the switch
>   * @irq_domain:		IRQ domain of the switch irq_chip
>   * @irq_enable:		IRQ enable bits, synced to SYS_INT_EN
> @@ -769,6 +770,7 @@ struct mt7530_priv {
>  	phy_interface_t		p6_interface;
>  	phy_interface_t		p5_interface;
>  	enum p5_interface_select p5_intf_sel;
> +	bool			p5_sgmii;
>  	u8			mirror_rx;
>  	u8			mirror_tx;
>  	struct mt7530_port	ports[MT7530_NUM_PORTS];
> @@ -778,7 +780,7 @@ struct mt7530_priv {
>  	int irq;
>  	struct irq_domain *irq_domain;
>  	u32 irq_enable;
> -	int (*create_sgmii)(struct mt7530_priv *priv, bool dual_sgmii);
> +	int (*create_sgmii)(struct mt7530_priv *priv);
>  };
>  
>  struct mt7530_hw_vlan_entry {
> -- 
> 2.37.2
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ