linux-kernel - [PATCH v4 1/3] Bluetooth: btusb: mediatek: use readx_poll

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <4699f59b36d522ec263dcea71eda40ae939004f8.1682549719.git.objelf@gmail.com>
Date:   Thu, 27 Apr 2023 07:08:43 +0800
From:   <sean.wang@...iatek.com>
To:     <marcel@...tmann.org>, <johan.hedberg@...il.com>,
        <luiz.dentz@...il.com>
CC:     <sean.wang@...iatek.com>, <chris.lu@...iatek.com>,
        <Soul.Huang@...iatek.com>, <Leon.Yen@...iatek.com>,
        <Deren.Wu@...iatek.com>, <km.lin@...iatek.com>,
        <robin.chiu@...iatek.com>, <Eddie.Chen@...iatek.com>,
        <ch.yeh@...iatek.com>, <jenhao.yang@...iatek.com>,
        <Stella.Chang@...iatek.com>, <Tom.Chou@...iatek.com>,
        <steve.lee@...iatek.com>, <jsiuda@...gle.com>,
        <frankgor@...gle.com>, <abhishekpandit@...gle.com>,
        <michaelfsun@...gle.com>, <abhishekpandit@...omium.org>,
        <mcchou@...omium.org>, <shawnku@...gle.com>,
        <linux-bluetooth@...r.kernel.org>,
        <linux-mediatek@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH v4 1/3] Bluetooth: btusb: mediatek: use readx_poll_timeout instead of open coding

From: Sean Wang <sean.wang@...iatek.com>

Use readx_poll_timeout instead of open coding to poll the hardware reset
status until it is done.

Signed-off-by: Sean Wang <sean.wang@...iatek.com>
---
v2: use 20ms as the unit to poll according to the requirement of
    readx_poll_timeout
v3: refine btusb_mtk_reset_done and drop the necessary error check
    in btusb_mtk_cmd_timeout
v4:  rebase onto the latest codebase
---
 drivers/bluetooth/btusb.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 2a8e2bb038f5..275e0666503d 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2566,8 +2566,6 @@ static int btusb_setup_realtek(struct hci_dev *hdev)
 #define MTK_EP_RST_OPT		0x74011890
 #define MTK_EP_RST_IN_OUT_OPT	0x00010001
 #define MTK_BT_RST_DONE		0x00000100
-#define MTK_BT_RESET_WAIT_MS	100
-#define MTK_BT_RESET_NUM_TRIES	10
 
 static void btusb_mtk_wmt_recv(struct urb *urb)
 {
@@ -2938,6 +2936,16 @@ static int btusb_mtk_id_get(struct btusb_data *data, u32 reg, u32 *id)
 	return btusb_mtk_reg_read(data, reg, id);
 }
 
+static u32 btusb_mtk_reset_done(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	u32 val = 0;
+
+	btusb_mtk_uhw_reg_read(data, MTK_BT_MISC, &val);
+
+	return val & MTK_BT_RST_DONE;
+}
+
 static int btusb_mtk_setup(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
@@ -3127,7 +3135,7 @@ static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
 	u32 val;
-	int err, retry = 0;
+	int err;
 
 	/* It's MediaTek specific bluetooth reset mechanism via USB */
 	if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
@@ -3158,18 +3166,10 @@ static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
 	btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
 	btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
 
-	/* Poll the register until reset is completed */
-	do {
-		btusb_mtk_uhw_reg_read(data, MTK_BT_MISC, &val);
-		if (val & MTK_BT_RST_DONE) {
-			bt_dev_dbg(hdev, "Bluetooth Reset Successfully");
-			break;
-		}
-
-		bt_dev_dbg(hdev, "Polling Bluetooth Reset CR");
-		retry++;
-		msleep(MTK_BT_RESET_WAIT_MS);
-	} while (retry < MTK_BT_RESET_NUM_TRIES);
+	err = readx_poll_timeout(btusb_mtk_reset_done, hdev, val,
+				 val & MTK_BT_RST_DONE, 20000, 1000000);
+	if (err < 0)
+		bt_dev_err(hdev, "Reset timeout");
 
 	btusb_mtk_id_get(data, 0x70010200, &val);
 	if (!val)
-- 
2.25.1