| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230426115114.156696-6-tomi.valkeinen@ideasonboard.com>
Date: Wed, 26 Apr 2023 14:51:11 +0300
From: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
To: linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-i2c@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Wolfram Sang <wsa@...nel.org>,
Luca Ceresoli <luca.ceresoli@...tlin.com>,
Andy Shevchenko <andriy.shevchenko@...el.com>,
Matti Vaittinen <Matti.Vaittinen@...rohmeurope.com>,
Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@...nel.org>,
Peter Rosin <peda@...ntia.se>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Michael Tretter <m.tretter@...gutronix.de>,
Hans Verkuil <hverkuil@...all.nl>,
Mike Pagano <mpagano@...too.org>,
Krzysztof Hałasa <khalasa@...p.pl>,
Marek Vasut <marex@...x.de>,
Satish Nagireddy <satish.nagireddy@...cruise.com>,
Tomi Valkeinen <tomi.valkeinen@...asonboard.com>,
Rob Herring <robh@...nel.org>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>
Subject: [PATCH v13 5/8] dt-bindings: media: add TI DS90UB960 FPD-Link III Deserializer
Add DT bindings for TI DS90UB960 FPD-Link III Deserializer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
Reviewed-by: Rob Herring <robh@...nel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
---
.../bindings/media/i2c/ti,ds90ub960.yaml | 427 ++++++++++++++++++
1 file changed, 427 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
new file mode 100644
index 000000000000..289737721c2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
@@ -0,0 +1,427 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub960.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DS90UB9XX Family FPD-Link Deserializer Hubs
+
+maintainers:
+ - Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
+
+description:
+ The TI DS90UB9XX devices are FPD-Link video deserializers with I2C and GPIO
+ forwarding.
+
+allOf:
+ - $ref: /schemas/i2c/i2c-atr.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,ds90ub960-q1
+ - ti,ds90ub9702-q1
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description:
+ Reference clock connected to the REFCLK pin.
+
+ clock-names:
+ items:
+ - const: refclk
+
+ powerdown-gpios:
+ maxItems: 1
+ description:
+ Specifier for the GPIO connected to the PDB pin.
+
+ i2c-alias-pool:
+ minItems: 1
+ maxItems: 32
+
+ links:
+ type: object
+ additionalProperties: false
+
+ properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ ti,manual-strobe:
+ type: boolean
+ description:
+ Enable manual strobe position and EQ level
+
+ patternProperties:
+ '^link@[0-3]$':
+ type: object
+ additionalProperties: false
+ properties:
+ reg:
+ description: The link number
+ maxItems: 1
+
+ i2c-alias:
+ description:
+ The I2C address used for the serializer. Transactions to this
+ address on the I2C bus where the deserializer resides are
+ forwarded to the serializer.
+
+ ti,rx-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # RAW10
+ - 1 # RAW12 HF
+ - 2 # RAW12 LF
+ - 3 # CSI2 SYNC
+ - 4 # CSI2 NON-SYNC
+ description:
+ FPD-Link Input Mode. This should reflect the hardware and the
+ default mode of the connected device.
+
+ ti,cdr-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # FPD-Link III
+ - 1 # FPD-Link IV
+ description:
+ FPD-Link CDR Mode. This should reflect the hardware and the
+ default mode of the connected device.
+
+ ti,strobe-pos:
+ $ref: /schemas/types.yaml#/definitions/int32
+ minimum: -13
+ maximum: 13
+ description: Manual strobe position
+
+ ti,eq-level:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 14
+ description: Manual EQ level
+
+ serializer:
+ type: object
+ description: FPD-Link Serializer node
+
+ required:
+ - reg
+ - i2c-alias
+ - ti,rx-mode
+ - serializer
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: FPD-Link input 0
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+ description:
+ Endpoint for FPD-Link port. If the RX mode for this port is RAW,
+ hsync-active and vsync-active must be defined.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: FPD-Link input 1
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+ description:
+ Endpoint for FPD-Link port. If the RX mode for this port is RAW,
+ hsync-active and vsync-active must be defined.
+
+ port@2:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: FPD-Link input 2
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+ description:
+ Endpoint for FPD-Link port. If the RX mode for this port is RAW,
+ hsync-active and vsync-active must be defined.
+
+ port@3:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: FPD-Link input 3
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+ description:
+ Endpoint for FPD-Link port. If the RX mode for this port is RAW,
+ hsync-active and vsync-active must be defined.
+
+ port@4:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI-2 Output 0
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+ link-frequencies:
+ maxItems: 1
+
+ required:
+ - data-lanes
+ - link-frequencies
+
+ port@5:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: CSI-2 Output 1
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+ link-frequencies:
+ maxItems: 1
+
+ required:
+ - data-lanes
+ - link-frequencies
+
+ required:
+ - port@0
+ - port@1
+ - port@2
+ - port@3
+ - port@4
+ - port@5
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ deser@3d {
+ compatible = "ti,ds90ub960-q1";
+ reg = <0x3d>;
+
+ clock-names = "refclk";
+ clocks = <&fixed_clock>;
+
+ powerdown-gpios = <&pca9555 7 GPIO_ACTIVE_LOW>;
+
+ i2c-alias-pool = <0x4a 0x4b 0x4c 0x4d 0x4e 0x4f>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Port 0, Camera 0 */
+ port@0 {
+ reg = <0>;
+
+ ub960_fpd3_1_in: endpoint {
+ remote-endpoint = <&ub953_1_out>;
+ };
+ };
+
+ /* Port 1, Camera 1 */
+ port@1 {
+ reg = <1>;
+
+ ub960_fpd3_2_in: endpoint {
+ remote-endpoint = <&ub913_2_out>;
+ hsync-active = <0>;
+ vsync-active = <1>;
+ };
+ };
+
+ /* Port 2, unconnected */
+ port@2 {
+ reg = <2>;
+ };
+
+ /* Port 3, unconnected */
+ port@3 {
+ reg = <3>;
+ };
+
+ /* Port 4, CSI-2 TX */
+ port@4 {
+ reg = <4>;
+ ds90ub960_0_csi_out: endpoint {
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <800000000>;
+ remote-endpoint = <&csi2_phy0>;
+ };
+ };
+
+ /* Port 5, unconnected */
+ port@5 {
+ reg = <5>;
+ };
+ };
+
+ links {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Link 0 has DS90UB953 serializer and IMX274 sensor */
+
+ link@0 {
+ reg = <0>;
+ i2c-alias = <0x44>;
+
+ ti,rx-mode = <3>;
+
+ serializer1: serializer {
+ compatible = "ti,ds90ub953-q1";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ #clock-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ ub953_1_in: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&sensor_1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ub953_1_out: endpoint {
+ remote-endpoint = <&ub960_fpd3_1_in>;
+ };
+ };
+ };
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sensor@1a {
+ compatible = "sony,imx274";
+ reg = <0x1a>;
+
+ reset-gpios = <&serializer1 0 GPIO_ACTIVE_LOW>;
+
+ port {
+ sensor_1_out: endpoint {
+ remote-endpoint = <&ub953_1_in>;
+ };
+ };
+ };
+ };
+ };
+ }; /* End of link@0 */
+
+ /* Link 1 has DS90UB913 serializer and MT9V111 sensor */
+
+ link@1 {
+ reg = <1>;
+ i2c-alias = <0x45>;
+
+ ti,rx-mode = <0>;
+
+ serializer2: serializer {
+ compatible = "ti,ds90ub913a-q1";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ clocks = <&clk_cam_48M>;
+ clock-names = "clkin";
+
+ #clock-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ ub913_2_in: endpoint {
+ remote-endpoint = <&sensor_2_out>;
+ pclk-sample = <1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ub913_2_out: endpoint {
+ remote-endpoint = <&ub960_fpd3_2_in>;
+ };
+ };
+ };
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sensor@48 {
+ compatible = "aptina,mt9v111";
+ reg = <0x48>;
+
+ clocks = <&serializer2>;
+
+ port {
+ sensor_2_out: endpoint {
+ remote-endpoint = <&ub913_2_in>;
+ };
+ };
+ };
+ };
+ };
+ }; /* End of link@1 */
+ };
+ };
+ };
+...
--
2.34.1
Powered by blists - more mailing lists