| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f051bfe8-e612-f54e-7729-7816591fa21c@quicinc.com>
Date: Wed, 26 Apr 2023 17:35:40 +0530
From: Shazad Hussain <quic_shazhuss@...cinc.com>
To: Adrien Thierry <athierry@...hat.com>
CC: <agross@...nel.org>, <andersson@...nel.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Vinod Koul <vkoul@...nel.org>,
"Kishon Vijay Abraham I" <kishon@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Wesley Cheng <quic_wcheng@...cinc.com>,
<linux-arm-msm@...r.kernel.org>, <linux-phy@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-usb@...r.kernel.org>
Subject: Re: [PATCH v1 0/6] arm64: qcom: sa8775p: add support for USB
Hi Adrien,
On 4/25/2023 4:05 AM, Adrien Thierry wrote:
> Hi Shazad,
>
> On Fri, Apr 21, 2023 at 07:09:15PM +0530, Shazad Hussain wrote:
>> Update relavent DT bindings for USB, add new config to the phy driver,
>> add USB and PHY nodes to the .dtsi and enable them in the board .dts
>> for the sa8775p-ride platform.
>>
>> Shazad Hussain (6):
>> dt-bindings: usb: qcom,dwc3: Add bindings for SA8775P
>> dt-bindings: phy: qcom,usb-snps-femto-v2: Add bindings for SA8775P
>> dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add SA8775P USB PHY
>> binding
>> phy: qcom-qmp: Add SA8775P USB3 UNI phy
>> arm64: dts: qcom: sa8775p: add USB nodes
>> arm64: dts: qcom: sa8775p-ride: enable USB nodes
>>
>> .../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml | 1 +
>> .../bindings/phy/qcom,usb-snps-femto-v2.yaml | 1 +
>> .../devicetree/bindings/usb/qcom,dwc3.yaml | 5 +
>> arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 92 +++++++
>> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 239 +++++++++++++++++-
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 45 ++++
>> 6 files changed, 381 insertions(+), 2 deletions(-)
>>
>> --
>> 2.17.1
>>
>
> Thanks for posting this. I tested the series on the sa8775p, and it seems
> initialization for the controller at a400000 sometimes fails with a
> timeout (-110) error:
>
> dwc3 a400000.usb: Adding to iommu group 2
> xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
> xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
> xhci-hcd xhci-hcd.0.auto: can't setup: -110
> xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
> xhci-hcd: probe of xhci-hcd.0.auto failed with error -110
> dwc3 a600000.usb: Adding to iommu group 3
> dwc3 a800000.usb: Adding to iommu group 4
> xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
> xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
> xhci-hcd xhci-hcd.1.auto: hcc params 0x0110ffc5 hci version 0x110 quirks 0x0000000000010010
> xhci-hcd xhci-hcd.1.auto: irq 162, io mem 0x0a800000
> xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
> xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
> xhci-hcd xhci-hcd.1.auto: Host supports USB 3.1 Enhanced SuperSpeed
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 1 port detected
> usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 1 port detected
>
> In this case, only usb devices for a800000 are showing:
>
> dracut:/# ls -alh /sys/bus/usb/devices
> total 0
> drwxr-xr-x 2 root root 0 Feb 27 00:00 .
> drwxr-xr-x 4 root root 0 Feb 27 00:00 ..
> lrwxrwxrwx 1 root root 0 Feb 27 00:00 1-0:1.0 -> ../../../devices/platform/soc@...8f8800.usb/a800000.usb/xhci-hcd.1.auto/usb1/1-0:1.0
> lrwxrwxrwx 1 root root 0 Feb 27 00:00 2-0:1.0 -> ../../../devices/platform/soc@...8f8800.usb/a800000.usb/xhci-hcd.1.auto/usb2/2-0:1.0
> lrwxrwxrwx 1 root root 0 Feb 27 00:00 usb1 -> ../../../devices/platform/soc@...8f8800.usb/a800000.usb/xhci-hcd.1.auto/usb1
> lrwxrwxrwx 1 root root 0 Feb 27 00:00 usb2 -> ../../../devices/platform/soc@...8f8800.usb/a800000.usb/xhci-hcd.1.auto/usb2
>
> This happens approximately 1 out of 2 reboots. Here's the kernel output
> when initialization succeeds:
>
> dwc3 a600000.usb: Adding to iommu group 2
> dwc3 a800000.usb: Adding to iommu group 3
> xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
> xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
> xhci-hcd xhci-hcd.0.auto: hcc params 0x0110ffc5 hci version 0x110 quirks 0x0000000000010010
> xhci-hcd xhci-hcd.0.auto: irq 161, io mem 0x0a800000
> xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
> xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
> xhci-hcd xhci-hcd.0.auto: Host supports USB 3.1 Enhanced SuperSpeed
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 1 port detected
> usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 1 port detected
> dwc3 a400000.usb: Adding to iommu group 4
> xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
> xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
> xhci-hcd xhci-hcd.1.auto: USB3 root hub has no ports
> xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000000010010
> xhci-hcd xhci-hcd.1.auto: irq 162, io mem 0x0a400000
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 1 port detected
>
> And the list of usb devices:
>
> dracut:/# ls -alh /sys/bus/usb/devices
> total 0
> drwxr-xr-x 2 root root 0 Feb 27 00:00 .
> drwxr-xr-x 4 root root 0 Feb 27 00:00 ..
> lrwxrwxrwx 1 root root 0 Feb 27 00:00 1-0:1.0 -> ../../../devices/platform/soc@...8f8800.usb/a800000.usb/xhci-hcd.0.auto/usb1/1-0:1.0
> lrwxrwxrwx 1 root root 0 Feb 27 00:00 2-0:1.0 -> ../../../devices/platform/soc@...8f8800.usb/a800000.usb/xhci-hcd.0.auto/usb2/2-0:1.0
> lrwxrwxrwx 1 root root 0 Feb 27 00:00 3-0:1.0 -> ../../../devices/platform/soc@...4f8800.usb/a400000.usb/xhci-hcd.1.auto/usb3/3-0:1.0
> lrwxrwxrwx 1 root root 0 Feb 27 00:00 usb1 -> ../../../devices/platform/soc@...8f8800.usb/a800000.usb/xhci-hcd.0.auto/usb1
> lrwxrwxrwx 1 root root 0 Feb 27 00:00 usb2 -> ../../../devices/platform/soc@...8f8800.usb/a800000.usb/xhci-hcd.0.auto/usb2
> lrwxrwxrwx 1 root root 0 Feb 27 00:00 usb3 -> ../../../devices/platform/soc@...4f8800.usb/a400000.usb/xhci-hcd.1.auto/usb3
>
> Have you also encountered this?
>
I did try 10 reboots and did not encounter this issue on my setup tough.
> Best,
>
> Adrien
>
---
-Shazad
Powered by blists - more mailing lists