lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230426124848.2af7ombywlsqkbva@autistic>
Date:   Wed, 26 Apr 2023 07:48:48 -0500
From:   Nishanth Menon <nm@...com>
To:     Udit Kumar <u-kumar1@...com>
CC:     <vigneshr@...com>, <kristo@...nel.org>, <robh+dt@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <m-chawdhry@...com>, <n-francis@...com>
Subject: Re: [PATCH 5/5] arm64: dts: ti: k3-j7200: Add bootph-pre-ram for
 u-boot

On 16:02-20230426, Udit Kumar wrote:
> Adding bootph-pre-ram property for pin mux needed by
> uboot.
> 
> Signed-off-by: Udit Kumar <u-kumar1@...com>
> ---
>  arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 5 +++++
>  arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi           | 3 +++
>  2 files changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> index 2cdfd957dd12..1bcb94aec588 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> @@ -81,7 +81,9 @@ vdd_sd_dv: gpio-regulator-TLV71033 {
>  };
>  
>  &wkup_pmx0 {
> +	bootph-pre-ram;
>  	mcu_uart0_pins_default: mcu_uart0_pins_default {
> +		bootph-pre-ram;
>  		pinctrl-single,pins = <
>  			J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */
>  			J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */
> @@ -91,6 +93,7 @@ J721E_WKUP_IOPAD(0xfc, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */
>  	};
>  
>  	wkup_uart0_pins_default: wkup_uart0_pins_default {
> +		bootph-pre-ram;
>  		pinctrl-single,pins = <
>  			J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */
>  			J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */
> @@ -125,7 +128,9 @@ J721E_WKUP_IOPAD(0x0030, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
>  };
>  
>  &main_pmx0 {
> +	bootph-pre-ram;
>  	main_uart0_pins_default: main_uart0_pins_default {
> +		bootph-pre-ram;
>  		pinctrl-single,pins = <
>  			J721E_IOPAD(0xb0, PIN_INPUT, 0) /* (T16) UART0_RXD */
>  			J721E_IOPAD(0xb4, PIN_OUTPUT, 0) /* (T17) UART0_TXD */
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
> index 269424154771..d2500837a0e8 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
> @@ -119,7 +119,9 @@ J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0)  /* MCU_OSPI0_DQS */
>  };
>  
>  &wkup_pmx2 {
> +	bootph-pre-ram;
>  	wkup_i2c0_pins_default: wkup-i2c0-pins-default {
> +			bootph-pre-ram;
>  			pinctrl-single,pins = <
>  			J721E_WKUP_IOPAD(0x98, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */
>  			J721E_WKUP_IOPAD(0x9c, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */
> @@ -129,6 +131,7 @@ J721E_WKUP_IOPAD(0x9c, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */
>  
>  &main_pmx0 {
>  	main_i2c0_pins_default: main-i2c0-pins-default {
> +		bootph-pre-ram;
>  		pinctrl-single,pins = <
>  			J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
>  			J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
> -- 
> 2.34.1
> 

There are a bunch of other nodes that neeed bootph-pre-ram -> lets first
ensure all the nodes needed for u-boot is present (esm is still in
discussion) then add bootph-pre-ram and related ones in a follow on series.

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ