| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <af691a402160887645739a5ad4ce5de0613b3d22.1682636929.git.jahau@rocketmail.com>
Date: Fri, 28 Apr 2023 01:30:07 +0200
From: Jakob Hauser <jahau@...ketmail.com>
To: Sebastian Reichel <sre@...nel.org>, Lee Jones <lee@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: Beomho Seo <beomho.seo@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Stephan Gerhold <stephan@...hold.net>,
Raymond Hackley <raymondhackley@...tonmail.com>,
Pavel Machek <pavel@....cz>, Axel Lin <axel.lin@...ics.com>,
ChiYuan Huang <cy_huang@...htek.com>,
Linus Walleij <linus.walleij@...aro.org>,
linux-pm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, phone-devel@...r.kernel.org,
~postmarketos/upstreaming@...ts.sr.ht,
Jakob Hauser <jahau@...ketmail.com>
Subject: [PATCH v3 4/8] mfd: rt5033: Apply preparatory changes before adding rt5033-charger driver
Order the register blocks to have the masks in descending manner.
Add new defines for constant voltage shift (RT5033_CHGCTRL2_CV_SHIFT),
MIVR mask (RT5033_CHGCTRL4_MIVR_MASK), pre-charge current shift
(RT5033_CHGCTRL4_IPREC_SHIFT), internal timer disable
(RT5033_INT_TIMER_DISABLE), termination disable (RT5033_TE_DISABLE),
CFO disable (RT5033_CFO_DISABLE), UUG disable (RT5033_CHARGER_UUG_DISABLE).
The fast charge timer type needs to be written on mask 0x38
(RT5033_CHGCTRL3_TIMER_MASK). To avoid a bit shift on application, change the
values of the timer types to fit the mask. Added the timout duration as a
comment. And the timer between TIMER8 and TIMER12 is most likely TIMER10, see
e.g. RT5036 [1] page 28 bottom.
Add value options for MIVR (Minimum Input Voltage Regulation).
Move RT5033_TE_ENABLE_MASK to the block "RT5033 CHGCTRL1 register", in order
to have the masks of the register collected there. To fit the naming scheme,
rename it to RT5033_CHGCTRL1_TE_EN_MASK.
Move RT5033_CHG_MAX_CURRENT to the block "RT5033 charger fast-charge current".
Add new defines RT5033_CV_MAX_VOLTAGE and RT5033_CHG_MAX_PRE_CURRENT to the
blocks "RT5033 charger constant charge voltage" and "RT5033 charger pre-charge
current limits".
In include/linux/mfd/rt5033.h, turn power_supply "psy" into a pointer in order
to use it in devm_power_supply_register().
[1] https://media.digikey.com/pdf/Data%20Sheets/Richtek%20PDF/RT5036%20%20Preliminary.pdf
Signed-off-by: Jakob Hauser <jahau@...ketmail.com>
---
include/linux/mfd/rt5033-private.h | 53 ++++++++++++++++++++----------
include/linux/mfd/rt5033.h | 2 +-
2 files changed, 36 insertions(+), 19 deletions(-)
diff --git a/include/linux/mfd/rt5033-private.h b/include/linux/mfd/rt5033-private.h
index b6773ebf4e6b..0221f806d139 100644
--- a/include/linux/mfd/rt5033-private.h
+++ b/include/linux/mfd/rt5033-private.h
@@ -55,22 +55,24 @@ enum rt5033_reg {
};
/* RT5033 Charger state register */
+#define RT5033_CHG_STAT_TYPE_MASK 0x60
+#define RT5033_CHG_STAT_TYPE_PRE 0x20
+#define RT5033_CHG_STAT_TYPE_FAST 0x60
#define RT5033_CHG_STAT_MASK 0x30
#define RT5033_CHG_STAT_DISCHARGING 0x00
#define RT5033_CHG_STAT_FULL 0x10
#define RT5033_CHG_STAT_CHARGING 0x20
#define RT5033_CHG_STAT_NOT_CHARGING 0x30
-#define RT5033_CHG_STAT_TYPE_MASK 0x60
-#define RT5033_CHG_STAT_TYPE_PRE 0x20
-#define RT5033_CHG_STAT_TYPE_FAST 0x60
/* RT5033 CHGCTRL1 register */
#define RT5033_CHGCTRL1_IAICR_MASK 0xe0
-#define RT5033_CHGCTRL1_MODE_MASK 0x01
+#define RT5033_CHGCTRL1_TE_EN_MASK 0x08
#define RT5033_CHGCTRL1_HZ_MASK 0x02
+#define RT5033_CHGCTRL1_MODE_MASK 0x01
/* RT5033 CHGCTRL2 register */
#define RT5033_CHGCTRL2_CV_MASK 0xfc
+#define RT5033_CHGCTRL2_CV_SHIFT 0x02
/* RT5033 DEVICE_ID register */
#define RT5033_VENDOR_ID_MASK 0xf0
@@ -82,14 +84,15 @@ enum rt5033_reg {
#define RT5033_CHGCTRL3_TIMER_EN_MASK 0x01
/* RT5033 CHGCTRL4 register */
-#define RT5033_CHGCTRL4_EOC_MASK 0x07
+#define RT5033_CHGCTRL4_MIVR_MASK 0xe0
#define RT5033_CHGCTRL4_IPREC_MASK 0x18
+#define RT5033_CHGCTRL4_IPREC_SHIFT 0x03
+#define RT5033_CHGCTRL4_EOC_MASK 0x07
/* RT5033 CHGCTRL5 register */
-#define RT5033_CHGCTRL5_VPREC_MASK 0x0f
#define RT5033_CHGCTRL5_ICHG_MASK 0xf0
#define RT5033_CHGCTRL5_ICHG_SHIFT 0x04
-#define RT5033_CHG_MAX_CURRENT 0x0d
+#define RT5033_CHGCTRL5_VPREC_MASK 0x0f
/* RT5033 RT CTRL1 register */
#define RT5033_RT_CTRL1_UUG_MASK 0x02
@@ -128,20 +131,28 @@ enum rt5033_reg {
#define RT5033_AICR_1500_MODE 0xc0
#define RT5033_AICR_2000_MODE 0xe0
-/* RT5033 use internal timer need to set time */
-#define RT5033_FAST_CHARGE_TIMER4 0x00
-#define RT5033_FAST_CHARGE_TIMER6 0x01
-#define RT5033_FAST_CHARGE_TIMER8 0x02
-#define RT5033_FAST_CHARGE_TIMER9 0x03
-#define RT5033_FAST_CHARGE_TIMER12 0x04
-#define RT5033_FAST_CHARGE_TIMER14 0x05
-#define RT5033_FAST_CHARGE_TIMER16 0x06
+/* RT5033 charger minimum input voltage regulation */
+#define RT5033_CHARGER_MIVR_DISABLE 0x00
+#define RT5033_CHARGER_MIVR_4200MV 0x20
+#define RT5033_CHARGER_MIVR_4300MV 0x40
+#define RT5033_CHARGER_MIVR_4400MV 0x60
+#define RT5033_CHARGER_MIVR_4500MV 0x80
+#define RT5033_CHARGER_MIVR_4600MV 0xa0
+#define RT5033_CHARGER_MIVR_4700MV 0xc0
+#define RT5033_CHARGER_MIVR_4800MV 0xe0
+/* RT5033 use internal timer need to set time */
+#define RT5033_FAST_CHARGE_TIMER4 0x00 /* 4 hrs */
+#define RT5033_FAST_CHARGE_TIMER6 0x08 /* 6 hrs */
+#define RT5033_FAST_CHARGE_TIMER8 0x10 /* 8 hrs */
+#define RT5033_FAST_CHARGE_TIMER10 0x18 /* 10 hrs */
+#define RT5033_FAST_CHARGE_TIMER12 0x20 /* 12 hrs */
+#define RT5033_FAST_CHARGE_TIMER14 0x28 /* 14 hrs */
+#define RT5033_FAST_CHARGE_TIMER16 0x30 /* 16 hrs */
+
+#define RT5033_INT_TIMER_DISABLE 0x00
#define RT5033_INT_TIMER_ENABLE 0x01
-/* RT5033 charger termination enable mask */
-#define RT5033_TE_ENABLE_MASK 0x08
-
/*
* RT5033 charger opa mode. RT5033 has two opa modes for OTG: charger mode
* and boost mode.
@@ -150,25 +161,30 @@ enum rt5033_reg {
#define RT5033_BOOST_MODE 0x01
/* RT5033 charger termination enable */
+#define RT5033_TE_DISABLE 0x00
#define RT5033_TE_ENABLE 0x08
/* RT5033 charger CFO enable */
+#define RT5033_CFO_DISABLE 0x00
#define RT5033_CFO_ENABLE 0x40
/* RT5033 charger constant charge voltage (as in CHGCTRL2 register), uV */
#define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MIN 3650000U
#define RT5033_CHARGER_CONST_VOLTAGE_STEP_NUM 25000U
#define RT5033_CHARGER_CONST_VOLTAGE_LIMIT_MAX 4400000U
+#define RT5033_CV_MAX_VOLTAGE 0x1e
/* RT5033 charger pre-charge current limits (as in CHGCTRL4 register), uA */
#define RT5033_CHARGER_PRE_CURRENT_LIMIT_MIN 350000U
#define RT5033_CHARGER_PRE_CURRENT_STEP_NUM 100000U
#define RT5033_CHARGER_PRE_CURRENT_LIMIT_MAX 650000U
+#define RT5033_CHG_MAX_PRE_CURRENT 0x03
/* RT5033 charger fast-charge current (as in CHGCTRL5 register), uA */
#define RT5033_CHARGER_FAST_CURRENT_MIN 700000U
#define RT5033_CHARGER_FAST_CURRENT_STEP_NUM 100000U
#define RT5033_CHARGER_FAST_CURRENT_MAX 2000000U
+#define RT5033_CHG_MAX_CURRENT 0x0d
/*
* RT5033 charger const-charge end of charger current (
@@ -192,6 +208,7 @@ enum rt5033_reg {
* RT5033 charger UUG. It enables MOS auto control by H/W charger
* circuit.
*/
+#define RT5033_CHARGER_UUG_DISABLE 0x00
#define RT5033_CHARGER_UUG_ENABLE 0x02
/* RT5033 charger high impedance mode */
diff --git a/include/linux/mfd/rt5033.h b/include/linux/mfd/rt5033.h
index 8f306ac15a27..e99e2ab0c1c1 100644
--- a/include/linux/mfd/rt5033.h
+++ b/include/linux/mfd/rt5033.h
@@ -51,7 +51,7 @@ struct rt5033_charger_data {
struct rt5033_charger {
struct device *dev;
struct rt5033_dev *rt5033;
- struct power_supply psy;
+ struct power_supply *psy;
struct rt5033_charger_data *chg;
};
--
2.39.2
Powered by blists - more mailing lists