| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <3be758e3-aa41-0003-fd1a-324b8dd4267a@amlogic.com>
Date: Thu, 27 Apr 2023 16:38:20 +0800
From: Yu Tu <yu.tu@...ogic.com>
To: Dmitry Rokosov <ddrokosov@...rdevices.ru>
Cc: linux-clk@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
Neil Armstrong <neil.armstrong@...aro.org>,
Jerome Brunet <jbrunet@...libre.com>,
Kevin Hilman <khilman@...libre.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
kelvin.zhang@...ogic.com, qi.duan@...ogic.com
Subject: Re: [PATCH V7 3/4] clk: meson: S4: add support for Amlogic S4 SoC PLL
clock driver
On 2023/4/26 19:13, Dmitry Rokosov wrote:
> [Some people who received this message don't often get email from ddrokosov@...rdevices.ru. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>
> [ EXTERNAL EMAIL ]
>
> On Mon, Apr 17, 2023 at 02:50:04PM +0800, Yu Tu wrote:
>> Add the S4 PLL clock controller driver in the s4 SoC family.
>>
>> Signed-off-by: Yu Tu <yu.tu@...ogic.com>
>> ---
>> drivers/clk/meson/Kconfig | 13 +
>> drivers/clk/meson/Makefile | 1 +
>> drivers/clk/meson/s4-pll.c | 902 +++++++++++++++++++++++++++++++++++++
>> drivers/clk/meson/s4-pll.h | 87 ++++
>> 4 files changed, 1003 insertions(+)
>> create mode 100644 drivers/clk/meson/s4-pll.c
>> create mode 100644 drivers/clk/meson/s4-pll.h
>>
>> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>> index fc002c155bc3..a663c90a3f3b 100644
>> --- a/drivers/clk/meson/Kconfig
>> +++ b/drivers/clk/meson/Kconfig
>> @@ -115,4 +115,17 @@ config COMMON_CLK_G12A
>> help
>> Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2
>> devices, aka g12a. Say Y if you want peripherals to work.
>> +
>> +config COMMON_CLK_S4_PLL
>> + tristate "S4 SoC PLL clock controllers support"
>> + depends on ARM64
>> + default y
>> + select COMMON_CLK_MESON_MPLL
>> + select COMMON_CLK_MESON_PLL
>> + select COMMON_CLK_MESON_REGMAP
>> + help
>> + Support for the pll clock controller on Amlogic S805X2 and S905Y4 devices,
>> + aka s4. Amlogic S805X2 and S905Y4 devices include AQ222 and AQ229.
>> + Say Y if you want the board to work, because plls are the parent of most
>> + peripherals.
>> endmenu
>> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>> index 6eca2a406ee3..376f49cc13f1 100644
>> --- a/drivers/clk/meson/Makefile
>> +++ b/drivers/clk/meson/Makefile
>> @@ -19,3 +19,4 @@ obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
>> obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
>> obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
>> obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
>> +obj-$(CONFIG_COMMON_CLK_S4_PLL) += s4-pll.o
>> diff --git a/drivers/clk/meson/s4-pll.c b/drivers/clk/meson/s4-pll.c
>> new file mode 100644
>> index 000000000000..5a34d304adf7
>> --- /dev/null
>> +++ b/drivers/clk/meson/s4-pll.c
>> @@ -0,0 +1,902 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Amlogic Meson-S4 PLL Clock Controller Driver
>> + *
>> + * Copyright (c) 2021 Amlogic, inc.
>> + * Author: Yu Tu <yu.tu@...ogic.com>
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +
>> +#include "clk-mpll.h"
>> +#include "clk-pll.h"
>> +#include "clk-regmap.h"
>> +#include "s4-pll.h"
>> +
>> +static DEFINE_SPINLOCK(meson_clk_lock);
>> +
>> +static struct clk_regmap s4_fixed_pll_dco = {
>> + .data = &(struct meson_clk_pll_data){
>> + .en = {
>> + .reg_off = ANACTRL_FIXPLL_CTRL0,
>> + .shift = 28,
>> + .width = 1,
>> + },
>> + .m = {
>> + .reg_off = ANACTRL_FIXPLL_CTRL0,
>> + .shift = 0,
>> + .width = 8,
>> + },
>> + .n = {
>> + .reg_off = ANACTRL_FIXPLL_CTRL0,
>> + .shift = 10,
>> + .width = 5,
>> + },
>> + .frac = {
>> + .reg_off = ANACTRL_FIXPLL_CTRL1,
>> + .shift = 0,
>> + .width = 17,
>> + },
>> + .l = {
>> + .reg_off = ANACTRL_FIXPLL_CTRL0,
>> + .shift = 31,
>> + .width = 1,
>> + },
>> + .rst = {
>> + .reg_off = ANACTRL_FIXPLL_CTRL0,
>> + .shift = 29,
>> + .width = 1,
>> + },
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fixed_pll_dco",
>> + /*
>> + * This clock is a fixed value (4GHz) that is initialized by ROMcode.
>> + * This clock won't ever change at runtime.
>> + * The chip design determines that this clock cannot be changed after
>> + * initialization. To prevent system crash caused by changing
>> + * fixed related register in kernel phase. This register is not
>> + * writable in the kernel phase.
>> + * So we use ro_ops.
>> + */
>> + .ops = &meson_clk_pll_ro_ops,
>> + .parent_data = (const struct clk_parent_data []) {
>> + { .fw_name = "xtal", }
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_fixed_pll = {
>> + .data = &(struct clk_regmap_div_data){
>> + .offset = ANACTRL_FIXPLL_CTRL0,
>> + .shift = 16,
>> + .width = 2,
>> + .flags = CLK_DIVIDER_POWER_OF_TWO,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fixed_pll",
>> + /*
>> + * This clock is a fixed value (2GHz) that is initialized by ROMcode.
>> + * This clock won't ever change at runtime.
>> + * The chip design determines that this clock cannot be changed after
>> + * initialization. To prevent system crash caused by changing
>> + * fixed related register in kernel phase. This register is not
>> + * writable in the kernel phase.
>> + * So we use ro_ops.
>> + */
>> + .ops = &clk_regmap_divider_ro_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_fixed_pll_dco.hw
>> + },
>> + .num_parents = 1,
>> + /*
>> + * This clock won't ever change at runtime so
>> + * CLK_SET_RATE_PARENT is not required
>> + */
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor s4_fclk_div2_div = {
>> + .mult = 1,
>> + .div = 2,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div2_div",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_fclk_div2 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = ANACTRL_FIXPLL_CTRL1,
>> + .bit_idx = 24,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div2",
>> + /*
>> + * This clock is a fixed value (1GHz) that is initialized by ROMcode.
>> + * This clock won't ever ungate at runtime.
>> + * The chip design determines that this clock cannot be changed after
>> + * initialization. To prevent system crash caused by changing
>> + * fixed related register in kernel phase. This register is not
>> + * writable in the kernel phase.
>> + * So we use ro_ops.
>> + */
>
> The above comment has been copied and pasted many times.
> Please collapse it and refer to it from specific locations.
Just three times. The goal is to make it clear to the viewer.
>
>> + .ops = &clk_regmap_gate_ro_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_fclk_div2_div.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor s4_fclk_div3_div = {
>> + .mult = 1,
>> + .div = 3,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div3_div",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_fclk_div3 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = ANACTRL_FIXPLL_CTRL1,
>> + .bit_idx = 20,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div3",
>> + .ops = &clk_regmap_gate_ro_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_fclk_div3_div.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor s4_fclk_div4_div = {
>> + .mult = 1,
>> + .div = 4,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div4_div",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_fclk_div4 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = ANACTRL_FIXPLL_CTRL1,
>> + .bit_idx = 21,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div4",
>> + .ops = &clk_regmap_gate_ro_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_fclk_div4_div.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor s4_fclk_div5_div = {
>> + .mult = 1,
>> + .div = 5,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div5_div",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_fclk_div5 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = ANACTRL_FIXPLL_CTRL1,
>> + .bit_idx = 22,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div5",
>> + .ops = &clk_regmap_gate_ro_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_fclk_div5_div.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor s4_fclk_div7_div = {
>> + .mult = 1,
>> + .div = 7,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div7_div",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) { &s4_fixed_pll.hw },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_fclk_div7 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = ANACTRL_FIXPLL_CTRL1,
>> + .bit_idx = 23,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div7",
>> + .ops = &clk_regmap_gate_ro_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_fclk_div7_div.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_fixed_factor s4_fclk_div2p5_div = {
>> + .mult = 2,
>> + .div = 5,
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div2p5_div",
>> + .ops = &clk_fixed_factor_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_fixed_pll.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_fclk_div2p5 = {
>> + .data = &(struct clk_regmap_gate_data){
>> + .offset = ANACTRL_FIXPLL_CTRL1,
>> + .bit_idx = 25,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "fclk_div2p5",
>> + .ops = &clk_regmap_gate_ro_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_fclk_div2p5_div.hw
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static const struct pll_mult_range s4_gp0_pll_mult_range = {
>> + .min = 125,
>> + .max = 250,
>> +};
>> +
>> +/*
>> + * Internal gp0 pll emulation configuration parameters
>> + */
>> +static const struct reg_sequence s4_gp0_init_regs[] = {
>> + { .reg = ANACTRL_GP0PLL_CTRL1, .def = 0x00000000 },
>> + { .reg = ANACTRL_GP0PLL_CTRL2, .def = 0x00000000 },
>> + { .reg = ANACTRL_GP0PLL_CTRL3, .def = 0x48681c00 },
>> + { .reg = ANACTRL_GP0PLL_CTRL4, .def = 0x88770290 },
>> + { .reg = ANACTRL_GP0PLL_CTRL5, .def = 0x39272000 },
>> + { .reg = ANACTRL_GP0PLL_CTRL6, .def = 0x56540000 }
>
> Please ensure that the initialization sequence values do not overlap
> with the below pll_data bits that are managed during runtime.
>
That's right. There is a timing requirement for PLL initialization.
>> +};
>> +
>> +static struct clk_regmap s4_gp0_pll_dco = {
>> + .data = &(struct meson_clk_pll_data){
>> + .en = {
>> + .reg_off = ANACTRL_GP0PLL_CTRL0,
>> + .shift = 28,
>> + .width = 1,
>> + },
>> + .m = {
>> + .reg_off = ANACTRL_GP0PLL_CTRL0,
>> + .shift = 0,
>> + .width = 8,
>> + },
>> + .n = {
>> + .reg_off = ANACTRL_GP0PLL_CTRL0,
>> + .shift = 10,
>> + .width = 5,
>> + },
>> + .frac = {
>> + .reg_off = ANACTRL_GP0PLL_CTRL1,
>> + .shift = 0,
>> + .width = 17,
>> + },
>> + .l = {
>> + .reg_off = ANACTRL_GP0PLL_CTRL0,
>> + .shift = 31,
>> + .width = 1,
>> + },
>> + .rst = {
>> + .reg_off = ANACTRL_GP0PLL_CTRL0,
>> + .shift = 29,
>> + .width = 1,
>> + },
>> + .range = &s4_gp0_pll_mult_range,
>> + .init_regs = s4_gp0_init_regs,
>> + .init_count = ARRAY_SIZE(s4_gp0_init_regs),
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "gp0_pll_dco",
>> + .ops = &meson_clk_pll_ops,
>> + .parent_data = (const struct clk_parent_data []) {
>> + { .fw_name = "xtal", }
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_gp0_pll = {
>> + .data = &(struct clk_regmap_div_data){
>> + .offset = ANACTRL_GP0PLL_CTRL0,
>> + .shift = 16,
>> + .width = 3,
>> + .flags = (CLK_DIVIDER_POWER_OF_TWO |
>> + CLK_DIVIDER_ROUND_CLOSEST),
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "gp0_pll",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_gp0_pll_dco.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>> +/*
>> + * Internal hifi pll emulation configuration parameters
>> + */
>> +static const struct reg_sequence s4_hifi_init_regs[] = {
>> + { .reg = ANACTRL_HIFIPLL_CTRL1, .def = 0x00010e56 },
>> + { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00000000 },
>> + { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x6a285c00 },
>> + { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x65771290 },
>> + { .reg = ANACTRL_HIFIPLL_CTRL5, .def = 0x39272000 },
>> + { .reg = ANACTRL_HIFIPLL_CTRL6, .def = 0x56540000 }
>> +};
>
> Please ensure that the initialization sequence values do not overlap
> with the below pll_data bits that are managed during runtime.
[...]
>
>> +
>> +static struct clk_regmap s4_hifi_pll_dco = {
>> + .data = &(struct meson_clk_pll_data){
>> + .en = {
>> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
>> + .shift = 28,
>> + .width = 1,
>> + },
>> + .m = {
>> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
>> + .shift = 0,
>> + .width = 8,
>> + },
>> + .n = {
>> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
>> + .shift = 10,
>> + .width = 5,
>> + },
>> + .frac = {
>> + .reg_off = ANACTRL_HIFIPLL_CTRL1,
>> + .shift = 0,
>> + .width = 17,
>> + },
>> + .l = {
>> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
>> + .shift = 31,
>> + .width = 1,
>> + },
>> + .rst = {
>> + .reg_off = ANACTRL_HIFIPLL_CTRL0,
>> + .shift = 29,
>> + .width = 1,
>> + },
>> + .range = &s4_gp0_pll_mult_range,
>> + .init_regs = s4_hifi_init_regs,
>> + .init_count = ARRAY_SIZE(s4_hifi_init_regs),
>> + .flags = CLK_MESON_PLL_ROUND_CLOSEST,
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "hifi_pll_dco",
>> + .ops = &meson_clk_pll_ops,
>> + .parent_data = (const struct clk_parent_data []) {
>> + { .fw_name = "xtal", }
>> + },
>> + .num_parents = 1,
>> + },
>> +};
>> +
>> +static struct clk_regmap s4_hifi_pll = {
>> + .data = &(struct clk_regmap_div_data){
>> + .offset = ANACTRL_HIFIPLL_CTRL0,
>> + .shift = 16,
>> + .width = 2,
>> + .flags = (CLK_DIVIDER_POWER_OF_TWO |
>> + CLK_DIVIDER_ROUND_CLOSEST),
>> + },
>> + .hw.init = &(struct clk_init_data){
>> + .name = "hifi_pll",
>> + .ops = &clk_regmap_divider_ops,
>> + .parent_hws = (const struct clk_hw *[]) {
>> + &s4_hifi_pll_dco.hw
>> + },
>> + .num_parents = 1,
>> + .flags = CLK_SET_RATE_PARENT,
>> + },
>> +};
>> +
>
> [...]
>
>> +static int meson_s4_pll_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct regmap *regmap;
>> + void __iomem *base;
>> + int ret, i;
>> +
>> + base = devm_platform_ioremap_resource(pdev, 0);
>> + if (IS_ERR(base))
>> + return PTR_ERR(base);
>> +
>> + regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config);
>> + if (IS_ERR(regmap))
>> + return PTR_ERR(regmap);
>> +
>> + ret = regmap_multi_reg_write(regmap, s4_init_regs, ARRAY_SIZE(s4_init_regs));
>> + if (ret) {
>> + dev_err(dev, "Failed to init registers\n");
>
> dev_err_probe()
Clock drivers are the foundation on which other drivers run. There is no
need to EPROBE_DEFER. Also use EPROBE_DEFER as long as it is better to
use when getting the resource.
>
>> + return ret;
>> + }
>> +
>> + /* Populate regmap for the regmap backed clocks */
>> + for (i = 0; i < ARRAY_SIZE(s4_pll_clk_regmaps); i++)
>> + s4_pll_clk_regmaps[i]->map = regmap;
>> +
>> + for (i = 0; i < s4_pll_hw_onecell_data.num; i++) {
>> + /* array might be sparse */
>> + if (!s4_pll_hw_onecell_data.hws[i])
>> + continue;
>> +
>> + ret = devm_clk_hw_register(dev, s4_pll_hw_onecell_data.hws[i]);
>> + if (ret) {
>> + dev_err(dev, "Clock registration failed\n");
>
> dev_err_probe()
[...]
>
>> + return ret;
>> + }
>> + }
>> +
>> + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
>> + &s4_pll_hw_onecell_data);
>> +}
>> +
>> +static const struct of_device_id clkc_match_table[] = {
>> + {
>> + .compatible = "amlogic,s4-pll-clkc",
>> + },
>> + {}
>> +};
>> +
>> +static struct platform_driver s4_driver = {
>> + .probe = meson_s4_pll_probe,
>> + .driver = {
>> + .name = "s4-pll-clkc",
>> + .of_match_table = clkc_match_table,
>> + },
>> +};
>> +
>> +module_platform_driver(s4_driver);
>> +MODULE_LICENSE("GPL");
>> diff --git a/drivers/clk/meson/s4-pll.h b/drivers/clk/meson/s4-pll.h
>> new file mode 100644
>> index 000000000000..1fb5bececf5f
>> --- /dev/null
>> +++ b/drivers/clk/meson/s4-pll.h
>> @@ -0,0 +1,87 @@
>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
>> +/*
>> + * Copyright (c) 2021 Amlogic, inc.
>> + * Author: Yu Tu <yu.tu@...ogic.com>
>> + */
>> +
>> +#ifndef __MESON_S4_PLL_H__
>> +#define __MESON_S4_PLL_H__
>> +
>> +/* ANA_CTRL - Registers */
>> +
>> +#define ANACTRL_FIXPLL_CTRL0 0x040
>> +#define ANACTRL_FIXPLL_CTRL1 0x044
>> +#define ANACTRL_FIXPLL_CTRL2 0x048
>> +#define ANACTRL_FIXPLL_CTRL3 0x04c
>> +#define ANACTRL_FIXPLL_CTRL4 0x050
>> +#define ANACTRL_FIXPLL_CTRL5 0x054
>> +#define ANACTRL_FIXPLL_CTRL6 0x058
>> +#define ANACTRL_FIXPLL_STS 0x05c
>> +#define ANACTRL_GP0PLL_CTRL0 0x080
>> +#define ANACTRL_GP0PLL_CTRL1 0x084
>> +#define ANACTRL_GP0PLL_CTRL2 0x088
>> +#define ANACTRL_GP0PLL_CTRL3 0x08c
>> +#define ANACTRL_GP0PLL_CTRL4 0x090
>> +#define ANACTRL_GP0PLL_CTRL5 0x094
>> +#define ANACTRL_GP0PLL_CTRL6 0x098
>> +#define ANACTRL_GP0PLL_STS 0x09c
>> +#define ANACTRL_HIFIPLL_CTRL0 0x100
>> +#define ANACTRL_HIFIPLL_CTRL1 0x104
>> +#define ANACTRL_HIFIPLL_CTRL2 0x108
>> +#define ANACTRL_HIFIPLL_CTRL3 0x10c
>> +#define ANACTRL_HIFIPLL_CTRL4 0x110
>> +#define ANACTRL_HIFIPLL_CTRL5 0x114
>> +#define ANACTRL_HIFIPLL_CTRL6 0x118
>> +#define ANACTRL_HIFIPLL_STS 0x11c
>> +#define ANACTRL_MPLL_CTRL0 0x180
>> +#define ANACTRL_MPLL_CTRL1 0x184
>> +#define ANACTRL_MPLL_CTRL2 0x188
>> +#define ANACTRL_MPLL_CTRL3 0x18c
>> +#define ANACTRL_MPLL_CTRL4 0x190
>> +#define ANACTRL_MPLL_CTRL5 0x194
>> +#define ANACTRL_MPLL_CTRL6 0x198
>> +#define ANACTRL_MPLL_CTRL7 0x19c
>> +#define ANACTRL_MPLL_CTRL8 0x1a0
>> +#define ANACTRL_MPLL_STS 0x1a4
>> +#define ANACTRL_HDMIPLL_CTRL0 0x1c0
>> +#define ANACTRL_HDMIPLL_CTRL1 0x1c4
>> +#define ANACTRL_HDMIPLL_CTRL2 0x1c8
>> +#define ANACTRL_HDMIPLL_CTRL3 0x1cc
>> +#define ANACTRL_HDMIPLL_CTRL4 0x1d0
>> +#define ANACTRL_HDMIPLL_CTRL5 0x1d4
>> +#define ANACTRL_HDMIPLL_CTRL6 0x1d8
>> +#define ANACTRL_HDMIPLL_STS 0x1dc
>> +#define ANACTRL_HDMIPLL_VLOCK 0x1e4
>> +
>> +/*
>> + * CLKID index values
>> + *
>> + * These indices are entirely contrived and do not map onto the hardware.
>> + * It has now been decided to expose everything by default in the DT header:
>> + * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
>
> axg-clkc.h?
I will correct.
>
>> + * to expose, such as the internal muxes and dividers of composite clocks,
>> + * will remain defined here.
>> + */
>> +#define CLKID_FIXED_PLL_DCO 0
>> +#define CLKID_FCLK_DIV2_DIV 2
>> +#define CLKID_FCLK_DIV3_DIV 4
>> +#define CLKID_FCLK_DIV4_DIV 6
>> +#define CLKID_FCLK_DIV5_DIV 8
>> +#define CLKID_FCLK_DIV7_DIV 10
>> +#define CLKID_FCLK_DIV2P5_DIV 12
>> +#define CLKID_GP0_PLL_DCO 14
>> +#define CLKID_HIFI_PLL_DCO 16
>> +#define CLKID_HDMI_PLL_DCO 18
>> +#define CLKID_HDMI_PLL_OD 19
>> +#define CLKID_MPLL_50M_DIV 21
>> +#define CLKID_MPLL_PREDIV 23
>> +#define CLKID_MPLL0_DIV 24
>> +#define CLKID_MPLL1_DIV 26
>> +#define CLKID_MPLL2_DIV 28
>> +#define CLKID_MPLL3_DIV 30
>> +
>> +#define NR_PLL_CLKS 32
>> +/* include the CLKIDs that have been made part of the DT binding */
>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
>> +
>> +#endif /* __MESON_S4_PLL_H__ */
>> --
>> 2.33.1
>>
>>
>> _______________________________________________
>> linux-amlogic mailing list
>> linux-amlogic@...ts.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-amlogic
>
> --
> Thank you,
> Dmitry
Powered by blists - more mailing lists