[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ece3e721-6e67-b2a9-4544-14e41a9b8589@linaro.org>
Date: Thu, 27 Apr 2023 15:18:44 +0200
From: Neil Armstrong <neil.armstrong@...aro.org>
To: Bjorn Andersson <quic_bjorande@...cinc.com>,
Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Johan Hovold <johan@...nel.org>
Cc: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 4/7] phy: qcom-qmp-combo: Introduce orientation switching
Hi,
On 25/04/2023 05:40, Bjorn Andersson wrote:
> The data lanes of the QMP PHY is swapped in order to handle changing
> orientation of the USB Type-C cable. Register a typec_switch device to
> allow a TCPM to configure the orientation.
>
> The newly introduced orientation variable is adjusted based on the
> request, and the initialized components are brought down and up again.
> To keep track of what parts needs to be cycled new variables to keep
> track of the individual init_count is introduced.
>
> Both the USB and the DisplayPort altmode signals are properly switched.
> For DisplayPort the controller will after the TCPM having established
> orientation power on the PHY, so this is not done implicitly, but for
> USB the PHY typically is kept initialized across the switch, and must
> therefor then be reinitialized.
therefore
>
> This is based on initial work by Wesley Cheng.
>
> Link: https://lore.kernel.org/r/20201009082843.28503-3-wcheng@codeaurora.org/
> Signed-off-by: Bjorn Andersson <quic_bjorande@...cinc.com>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 92 ++++++++++++++++++++---
> 1 file changed, 83 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index 6748f31da7a3..5d6d6ef3944b 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -20,6 +20,7 @@
> #include <linux/reset.h>
> #include <linux/slab.h>
> #include <linux/usb/typec.h>
> +#include <linux/usb/typec_mux.h>
>
> #include <dt-bindings/phy/phy-qcom-qmp.h>
>
> @@ -1320,15 +1321,18 @@ struct qmp_combo {
>
> struct phy *usb_phy;
> enum phy_mode mode;
> + unsigned int usb_init_count;
>
> struct phy *dp_phy;
> unsigned int dp_aux_cfg;
> struct phy_configure_opts_dp dp_opts;
> + unsigned int dp_init_count;
>
> struct clk_fixed_rate pipe_clk_fixed;
> struct clk_hw dp_link_hw;
> struct clk_hw dp_pixel_hw;
>
> + struct typec_switch_dev *sw;
> enum typec_orientation orientation;
> };
>
> @@ -2458,14 +2462,14 @@ static int qmp_combo_dp_calibrate(struct phy *phy)
> return 0;
> }
>
> -static int qmp_combo_com_init(struct qmp_combo *qmp)
> +static int qmp_combo_com_init(struct qmp_combo *qmp, bool force)
> {
> const struct qmp_phy_cfg *cfg = qmp->cfg;
> void __iomem *com = qmp->com;
> int ret;
> u32 val;
>
> - if (qmp->init_count++)
> + if (!force && qmp->init_count++)
> return 0;
>
> ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
> @@ -2526,11 +2530,11 @@ static int qmp_combo_com_init(struct qmp_combo *qmp)
> return ret;
> }
>
> -static int qmp_combo_com_exit(struct qmp_combo *qmp)
> +static int qmp_combo_com_exit(struct qmp_combo *qmp, bool force)
> {
> const struct qmp_phy_cfg *cfg = qmp->cfg;
>
> - if (--qmp->init_count)
> + if (!force && --qmp->init_count)
> return 0;
>
> reset_control_bulk_assert(cfg->num_resets, qmp->resets);
> @@ -2550,12 +2554,14 @@ static int qmp_combo_dp_init(struct phy *phy)
>
> mutex_lock(&qmp->phy_mutex);
>
> - ret = qmp_combo_com_init(qmp);
> + ret = qmp_combo_com_init(qmp, false);
> if (ret)
> goto out_unlock;
>
> cfg->dp_aux_init(qmp);
>
> + qmp->dp_init_count++;
> +
> out_unlock:
> mutex_unlock(&qmp->phy_mutex);
> return ret;
> @@ -2567,8 +2573,9 @@ static int qmp_combo_dp_exit(struct phy *phy)
>
> mutex_lock(&qmp->phy_mutex);
>
> - qmp_combo_com_exit(qmp);
> + qmp_combo_com_exit(qmp, false);
>
> + qmp->dp_init_count--;
> mutex_unlock(&qmp->phy_mutex);
>
> return 0;
> @@ -2688,16 +2695,18 @@ static int qmp_combo_usb_init(struct phy *phy)
> int ret;
>
> mutex_lock(&qmp->phy_mutex);
> - ret = qmp_combo_com_init(qmp);
> + ret = qmp_combo_com_init(qmp, false);
> if (ret)
> goto out_unlock;
>
> ret = qmp_combo_usb_power_on(phy);
> if (ret) {
> - qmp_combo_com_exit(qmp);
> + qmp_combo_com_exit(qmp, false);
> goto out_unlock;
> }
>
> + qmp->usb_init_count++;
> +
> out_unlock:
> mutex_unlock(&qmp->phy_mutex);
> return ret;
> @@ -2713,10 +2722,12 @@ static int qmp_combo_usb_exit(struct phy *phy)
> if (ret)
> goto out_unlock;
>
> - ret = qmp_combo_com_exit(qmp);
> + ret = qmp_combo_com_exit(qmp, false);
> if (ret)
> goto out_unlock;
>
> + qmp->usb_init_count--;
> +
> out_unlock:
> mutex_unlock(&qmp->phy_mutex);
> return ret;
> @@ -3351,6 +3362,65 @@ static struct phy *qmp_combo_phy_xlate(struct device *dev, struct of_phandle_arg
> return ERR_PTR(-EINVAL);
> }
>
> +#if IS_ENABLED(CONFIG_TYPEC)
> +static int qmp_combo_typec_switch_set(struct typec_switch_dev *sw,
> + enum typec_orientation orientation)
> +{
> + struct qmp_combo *qmp = typec_switch_get_drvdata(sw);
> + const struct qmp_phy_cfg *cfg = qmp->cfg;
> +
> + if (orientation == qmp->orientation || orientation == TYPEC_ORIENTATION_NONE)
> + return 0;
> +
> + mutex_lock(&qmp->phy_mutex);
> + qmp->orientation = orientation;
> +
> + if (qmp->init_count) {
> + if (qmp->usb_init_count)
> + qmp_combo_usb_power_off(qmp->usb_phy);
> + qmp_combo_com_exit(qmp, true);
> +
> + qmp_combo_com_init(qmp, true);
> + if (qmp->usb_init_count)
> + qmp_combo_usb_power_on(qmp->usb_phy);
> + if (qmp->dp_init_count)
> + cfg->dp_aux_init(qmp);
> + }
> + mutex_unlock(&qmp->phy_mutex);
> +
> + return 0;
> +}
> +
> +static void qmp_combo_typec_unregister(void *data)
> +{
> + struct qmp_combo *qmp = data;
> +
> + typec_switch_unregister(qmp->sw);
> +}
> +
> +static int qmp_combo_typec_switch_register(struct qmp_combo *qmp)
> +{
> + struct typec_switch_desc sw_desc = {};
> + struct device *dev = qmp->dev;
> +
> + sw_desc.drvdata = qmp;
> + sw_desc.fwnode = dev->fwnode;
> + sw_desc.set = qmp_combo_typec_switch_set;
> + qmp->sw = typec_switch_register(dev, &sw_desc);
> + if (IS_ERR(qmp->sw)) {
> + dev_err(dev, "Unable to register typec switch: %pe\n", qmp->sw);
> + return PTR_ERR(qmp->sw);
> + }
> +
> + return devm_add_action_or_reset(dev, qmp_combo_typec_unregister, qmp);
> +}
> +#else
> +static int qmp_combo_typec_switch_register(struct qmp_combo *qmp)
> +{
> + return 0;
> +}
> +#endif
> +
> static int qmp_combo_probe(struct platform_device *pdev)
> {
> struct qmp_combo *qmp;
> @@ -3385,6 +3455,10 @@ static int qmp_combo_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> + ret = qmp_combo_typec_switch_register(qmp);
> + if (ret)
> + return ret;
> +
> /* Check for legacy binding with child nodes. */
> usb_np = of_get_child_by_name(dev->of_node, "usb3-phy");
> if (usb_np) {
Thanks for taking care of this, with the commit typo fix:
Reviewed-by: Neil Armstrong <neil.armstrong@...aro.org>
Powered by blists - more mailing lists