[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230427161049.GA3107476-robh@kernel.org>
Date: Thu, 27 Apr 2023 11:10:49 -0500
From: Rob Herring <robh@...nel.org>
To: Linus Walleij <linus.walleij@...aro.org>
Cc: Bartosz Golaszewski <brgl@...ev.pl>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Lee Jones <lee@...nel.org>,
Philippe Schenker <philippe.schenker@...adex.com>,
Stefan Agner <stefan@...er.ch>, Marek Vasut <marex@...x.de>,
Steffen Trumtrar <s.trumtrar@...gutronix.de>,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-input@...r.kernel.org
Subject: Re: [PATCH v2 1/2] dt-bindings: gpio: Add STMPE YAML DT schema
On Wed, Apr 26, 2023 at 01:21:38PM +0200, Linus Walleij wrote:
> This adds a schema for the STMPE GPIO that while it is used a
> lot in the kernel tree is anyway missing its bindings.
>
> Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
> ---
> ChangeLog v1->v2:
> - New patch split off from the MFD patch.
> ---
> .../devicetree/bindings/gpio/st,stmpe-gpio.yaml | 60 ++++++++++++++++++++++
> 1 file changed, 60 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml
> new file mode 100644
> index 000000000000..6e991ebbdf77
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml
> @@ -0,0 +1,60 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/st,stmpe-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectonics Port Expander (STMPE) GPIO Block
> +
> +description: STMicroelectronics Port Expander (STMPE) is a series of slow
> + bus controllers for various expanded peripherals such as GPIO, keypad,
> + touchscreen, ADC, PWM or rotator. It can contain one or several different
> + peripherals connected to SPI or I2C. These bindings pertain to the
> + GPIO portions of these expanders.
> +
> +maintainers:
> + - Linus Walleij <linus.walleij@...aro.org>
> +
> +properties:
> + compatible:
> + const: st,stmpe-gpio
> +
> + "#gpio-cells":
> + const: 2
> +
> + "#interrupt-cells":
> + const: 2
> +
> + gpio-controller: true
> +
> + interrupt-controller: true
> +
> + st,norequest-mask:
> + description: A bitmask of GPIO lines that cannot be requested because for
> + for example not being connected to anything on the system
> + $ref: /schemas/types.yaml#/definitions/uint32
> +
> +patternProperties:
> + "^.+-hog(-[0-9]+)?$":
> + type: object
> +
> + properties:
> + gpio-hog: true
> + gpios: true
> + input: true
> + output-high: true
> + output-low: true
> + line-name: true
> +
> + required:
> + - gpio-hog
> + - gpios
All you need for hog nodes is:
"^.+-hog(-[0-9]+)?$":
type: object
required:
- gpio-hog
The presence of 'gpio-hog' causes the hog schema to be applied.
Rob
Powered by blists - more mailing lists