[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5a49421b-d5a4-f8fe-cb54-2fd3b73a146b@quicinc.com>
Date: Thu, 27 Apr 2023 22:18:04 +0530
From: Shazad Hussain <quic_shazhuss@...cinc.com>
To: Rob Herring <robh@...nel.org>
CC: <agross@...nel.org>, <andersson@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Vinod Koul <vkoul@...nel.org>,
"Kishon Vijay Abraham I" <kishon@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Wesley Cheng <quic_wcheng@...cinc.com>,
<linux-arm-msm@...r.kernel.org>, <linux-phy@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-usb@...r.kernel.org>
Subject: Re: [PATCH v1 1/6] dt-bindings: usb: qcom,dwc3: Add bindings for
SA8775P
On 4/27/2023 7:52 PM, Rob Herring wrote:
> On Fri, Apr 21, 2023 at 07:09:16PM +0530, Shazad Hussain wrote:
>> Add the compatible string for SA8775P SoC from Qualcomm.
>>
>> Set minItems to 3 for interrupts as usb2 i.e third usb port supports
>> only high speed mode and does not require ss_phy_irq.
>>
>> Signed-off-by: Shazad Hussain <quic_shazhuss@...cinc.com>
>> ---
>> Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 5 +++++
>> 1 file changed, 5 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
>> index d84281926f10..3ae02cffae49 100644
>> --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
>> +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
>> @@ -23,6 +23,7 @@ properties:
>> - qcom,msm8998-dwc3
>> - qcom,qcm2290-dwc3
>> - qcom,qcs404-dwc3
>> + - qcom,sa8775p-dwc3
>> - qcom,sc7180-dwc3
>> - qcom,sc7280-dwc3
>> - qcom,sc8280xp-dwc3
>> @@ -180,6 +181,7 @@ allOf:
>> - qcom,msm8953-dwc3
>> - qcom,msm8996-dwc3
>> - qcom,msm8998-dwc3
>> + - qcom,sa8775p-dwc3
>> - qcom,sc7180-dwc3
>> - qcom,sc7280-dwc3
>> - qcom,sdm670-dwc3
>> @@ -443,12 +445,15 @@ allOf:
>> compatible:
>> contains:
>> enum:
>> + - qcom,sa8775p-dwc3
>> - qcom,sc8280xp-dwc3
>> then:
>> properties:
>> interrupts:
>> + minItems: 3
>
> Now 3 interrupts is valid for qcom,sc8280xp-dwc3?
>
Hi Rob,
I was under the impression from [1] that usb_2 for sc8280xp has only 3
irq's, but it seems it does required all 4 irq's.
I would take care of this in next version of the patch. Thanks for
pointing it out.
[1]:
https://lore.kernel.org/lkml/20230405125759.4201-7-quic_kriskura@quicinc.com/
>> maxItems: 4
>> interrupt-names:
>> + minItems: 3
>> items:
>> - const: pwr_event
>> - const: dp_hs_phy_irq
>> --
>> 2.17.1
>>
-Shazad
Powered by blists - more mailing lists