linux-kernel - [PATCH v4 0/3] clk: qcom: clk-rcg2: introduce support for multiple conf for same freq

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230427150717.20860-1-ansuelsmth@gmail.com>
Date:   Thu, 27 Apr 2023 17:07:14 +0200
From:   Christian Marangi <ansuelsmth@...il.com>
To:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>, linux-arm-msm@...r.kernel.org,
        linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Christian Marangi <ansuelsmth@...il.com>
Subject: [PATCH v4 0/3] clk: qcom: clk-rcg2: introduce support for multiple conf for same freq

This small series fix a current problem with ipq8074 where the 2 uniphy
port doesn't work in some corner case with some clk configuration. The
port to correctly work require a specific frequency, using the wrong one
results in the port not transmitting data.

With the current code with a requested freq of 125MHz, the frequency is
set to 105MHz. This is caused by the fact that there are 2 different
configuration to set 125MHz and it's always selected the first one that
results in 105MHz.

In the original QSDK code, the frequency configuration selection is
different and the CEIL FLOOR logic is not present. Instead it's used a
BEST approach where the frequency table is checked and then it's checked
if there are duplicate entry.

This proposed implementation is more specific and introduce an entire new
set of ops and a specific freq table to support this special configuration.

A union is introduced in rcg2 struct to not duplicate the struct.
A new set of ops clk_rcg2_fm_ops are introduced to support this new kind
of frequency table.

Changes v4:
- Drop suggested but wrong re-search patch
- Move everything to separate ops and struct to not affect current rcg2
  users.
Changes v3:
- Add qcom_find_freq_exact
- Drop re-search on rcg2_set_rate
- Rework multiple conf patch to follow new implementation
Changes v2:
- Out of RFC
- Fix compile warning from buildbot related to F redefinition

Christian Marangi (3):
  clk: qcom: clk-rcg: introduce support for multiple conf for same freq
  clk: qcom: clk-rcg2: add support for rcg2 freq multi ops
  clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple conf

 drivers/clk/qcom/clk-rcg.h     |  24 +++++-
 drivers/clk/qcom/clk-rcg2.c    | 152 +++++++++++++++++++++++++++++++++
 drivers/clk/qcom/common.c      |  18 ++++
 drivers/clk/qcom/common.h      |   2 +
 drivers/clk/qcom/gcc-ipq8074.c | 120 ++++++++++++++++----------
 5 files changed, 271 insertions(+), 45 deletions(-)

-- 
2.39.2