| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230428121524.2125832-6-valentin.caron@foss.st.com>
Date: Fri, 28 Apr 2023 14:15:22 +0200
From: Valentin Caron <valentin.caron@...s.st.com>
To: Mark Brown <broonie@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Alain Volmat <alain.volmat@...s.st.com>
CC: <linux-spi@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
Valentin Caron <valentin.caron@...s.st.com>
Subject: [PATCH 5/7] spi: stm32: introduction of stm32h7 SPI slave support
Add support for stm32h7 to use SPI controller in slave role.
In such case, the spi instance should have the spi-slave property
defined.
Signed-off-by: Alain Volmat <alain.volmat@...s.st.com>
Signed-off-by: Valentin Caron <valentin.caron@...s.st.com>
---
drivers/spi/Kconfig | 1 +
drivers/spi/spi-stm32.c | 112 ++++++++++++++++++++++++++++------------
2 files changed, 79 insertions(+), 34 deletions(-)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 3de2ebe8294a..14810d24733b 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -936,6 +936,7 @@ config SPI_SPRD_ADI
config SPI_STM32
tristate "STMicroelectronics STM32 SPI controller"
depends on ARCH_STM32 || COMPILE_TEST
+ select SPI_SLAVE
help
SPI driver for STMicroelectronics STM32 SoCs.
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 82fbd20e8a96..2db6f93654d7 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -117,6 +117,7 @@
#define STM32H7_SPI_CFG2_CPHA BIT(24)
#define STM32H7_SPI_CFG2_CPOL BIT(25)
#define STM32H7_SPI_CFG2_SSM BIT(26)
+#define STM32H7_SPI_CFG2_SSIOP BIT(28)
#define STM32H7_SPI_CFG2_AFCNTR BIT(31)
/* STM32H7_SPI_IER bit fields */
@@ -170,6 +171,10 @@
*/
#define SPI_DMA_MIN_BYTES 16
+/* STM32 SPI driver helpers */
+#define STM32_SPI_MASTER_MODE(stm32_spi) (!(stm32_spi)->slave_mode)
+#define STM32_SPI_SLAVE_MODE(stm32_spi) ((stm32_spi)->slave_mode)
+
/**
* struct stm32_spi_reg - stm32 SPI register & bitfield desc
* @reg: register offset
@@ -190,6 +195,7 @@ struct stm32_spi_reg {
* @cpol: clock polarity register and polarity bit
* @cpha: clock phase register and phase bit
* @lsb_first: LSB transmitted first register and bit
+ * @cs_high: chips select active value
* @br: baud rate register and bitfields
* @rx: SPI RX data register
* @tx: SPI TX data register
@@ -201,6 +207,7 @@ struct stm32_spi_regspec {
const struct stm32_spi_reg cpol;
const struct stm32_spi_reg cpha;
const struct stm32_spi_reg lsb_first;
+ const struct stm32_spi_reg cs_high;
const struct stm32_spi_reg br;
const struct stm32_spi_reg rx;
const struct stm32_spi_reg tx;
@@ -280,6 +287,7 @@ struct stm32_spi_cfg {
* @dma_tx: dma channel for TX transfer
* @dma_rx: dma channel for RX transfer
* @phys_addr: SPI registers physical base address
+ * @slave_mode: the controller is configured as SPI slave
*/
struct stm32_spi {
struct device *dev;
@@ -307,6 +315,8 @@ struct stm32_spi {
struct dma_chan *dma_tx;
struct dma_chan *dma_rx;
dma_addr_t phys_addr;
+
+ bool slave_mode;
};
static const struct stm32_spi_regspec stm32f4_spi_regspec = {
@@ -318,6 +328,7 @@ static const struct stm32_spi_regspec stm32f4_spi_regspec = {
.cpol = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_CPOL },
.cpha = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_CPHA },
.lsb_first = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_LSBFRST },
+ .cs_high = {},
.br = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_BR, STM32F4_SPI_CR1_BR_SHIFT },
.rx = { STM32F4_SPI_DR },
@@ -336,6 +347,7 @@ static const struct stm32_spi_regspec stm32h7_spi_regspec = {
.cpol = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_CPOL },
.cpha = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_CPHA },
.lsb_first = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_LSBFRST },
+ .cs_high = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_SSIOP },
.br = { STM32H7_SPI_CFG1, STM32H7_SPI_CFG1_MBR,
STM32H7_SPI_CFG1_MBR_SHIFT },
@@ -971,6 +983,11 @@ static int stm32_spi_prepare_msg(struct spi_controller *ctrl,
else
clrb |= spi->cfg->regs->lsb_first.mask;
+ if (STM32_SPI_SLAVE_MODE(spi) && spi_dev->mode & SPI_CS_HIGH)
+ setb |= spi->cfg->regs->cs_high.mask;
+ else
+ clrb |= spi->cfg->regs->cs_high.mask;
+
dev_dbg(spi->dev, "cpol=%d cpha=%d lsb_first=%d cs_high=%d\n",
!!(spi_dev->mode & SPI_CPOL),
!!(spi_dev->mode & SPI_CPHA),
@@ -1161,7 +1178,8 @@ static int stm32h7_spi_transfer_one_irq(struct stm32_spi *spi)
if (spi->tx_buf)
stm32h7_spi_write_txfifo(spi);
- stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_CSTART);
+ if (STM32_SPI_MASTER_MODE(spi))
+ stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_CSTART);
writel_relaxed(ier, spi->base + STM32H7_SPI_IER);
@@ -1208,7 +1226,8 @@ static void stm32h7_spi_transfer_one_dma_start(struct stm32_spi *spi)
stm32_spi_enable(spi);
- stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_CSTART);
+ if (STM32_SPI_MASTER_MODE(spi))
+ stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_CSTART);
}
/**
@@ -1536,16 +1555,18 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
spi->cfg->set_bpw(spi);
/* Update spi->cur_speed with real clock speed */
- mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz,
- spi->cfg->baud_rate_div_min,
- spi->cfg->baud_rate_div_max);
- if (mbr < 0) {
- ret = mbr;
- goto out;
- }
+ if (STM32_SPI_MASTER_MODE(spi)) {
+ mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz,
+ spi->cfg->baud_rate_div_min,
+ spi->cfg->baud_rate_div_max);
+ if (mbr < 0) {
+ ret = mbr;
+ goto out;
+ }
- transfer->speed_hz = spi->cur_speed;
- stm32_spi_set_mbr(spi, mbr);
+ transfer->speed_hz = spi->cur_speed;
+ stm32_spi_set_mbr(spi, mbr);
+ }
comm_type = stm32_spi_communication_type(spi_dev, transfer);
ret = spi->cfg->set_mode(spi, comm_type);
@@ -1554,7 +1575,7 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
spi->cur_comm = comm_type;
- if (spi->cfg->set_data_idleness)
+ if (STM32_SPI_MASTER_MODE(spi) && spi->cfg->set_data_idleness)
spi->cfg->set_data_idleness(spi, transfer->len);
if (spi->cur_bpw <= 8)
@@ -1575,7 +1596,8 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
dev_dbg(spi->dev,
"data frame of %d-bit, data packet of %d data frames\n",
spi->cur_bpw, spi->cur_fthlv);
- dev_dbg(spi->dev, "speed set to %dHz\n", spi->cur_speed);
+ if (STM32_SPI_MASTER_MODE(spi))
+ dev_dbg(spi->dev, "speed set to %dHz\n", spi->cur_speed);
dev_dbg(spi->dev, "transfer of %d bytes (%d data frames)\n",
spi->cur_xferlen, nb_words);
dev_dbg(spi->dev, "dma %s\n",
@@ -1670,12 +1692,13 @@ static int stm32f4_spi_config(struct stm32_spi *spi)
}
/**
- * stm32h7_spi_config - Configure SPI controller as SPI master
+ * stm32h7_spi_config - Configure SPI controller
* @spi: pointer to the spi controller data structure
*/
static int stm32h7_spi_config(struct stm32_spi *spi)
{
unsigned long flags;
+ u32 cr1 = 0, cfg2 = 0;
spin_lock_irqsave(&spi->lock, flags);
@@ -1683,24 +1706,28 @@ static int stm32h7_spi_config(struct stm32_spi *spi)
stm32_spi_clr_bits(spi, STM32H7_SPI_I2SCFGR,
STM32H7_SPI_I2SCFGR_I2SMOD);
- /*
- * - SS input value high
- * - transmitter half duplex direction
- * - automatic communication suspend when RX-Fifo is full
- */
- stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_SSI |
- STM32H7_SPI_CR1_HDDIR |
- STM32H7_SPI_CR1_MASRX);
+ if (STM32_SPI_SLAVE_MODE(spi)) {
+ /* Use native slave select */
+ cfg2 &= ~STM32H7_SPI_CFG2_SSM;
+ } else {
+ /*
+ * - Transmitter half duplex direction
+ * - Automatic communication suspend when RX-Fifo is full
+ * - SS input value high
+ */
+ cr1 |= STM32H7_SPI_CR1_HDDIR | STM32H7_SPI_CR1_MASRX | STM32H7_SPI_CR1_SSI;
- /*
- * - Set the master mode (default Motorola mode)
- * - Consider 1 master/n slaves configuration and
- * SS input value is determined by the SSI bit
- * - keep control of all associated GPIOs
- */
- stm32_spi_set_bits(spi, STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_MASTER |
- STM32H7_SPI_CFG2_SSM |
- STM32H7_SPI_CFG2_AFCNTR);
+ /*
+ * - Set the master mode (default Motorola mode)
+ * - Consider 1 master/n slaves configuration and
+ * SS input value is determined by the SSI bit
+ * - keep control of all associated GPIOs
+ */
+ cfg2 |= STM32H7_SPI_CFG2_MASTER | STM32H7_SPI_CFG2_SSM | STM32H7_SPI_CFG2_AFCNTR;
+ }
+
+ stm32_spi_set_bits(spi, STM32H7_SPI_CR1, cr1);
+ stm32_spi_set_bits(spi, STM32H7_SPI_CFG2, cfg2);
spin_unlock_irqrestore(&spi->lock, flags);
@@ -1756,17 +1783,30 @@ static const struct of_device_id stm32_spi_of_match[] = {
};
MODULE_DEVICE_TABLE(of, stm32_spi_of_match);
+static int stm32h7_spi_slave_abort(struct spi_controller *ctrl)
+{
+ spi_finalize_current_transfer(ctrl);
+ return 0;
+}
+
static int stm32_spi_probe(struct platform_device *pdev)
{
struct spi_controller *ctrl;
struct stm32_spi *spi;
struct resource *res;
struct reset_control *rst;
+ struct device_node *np = pdev->dev.of_node;
+ bool slave_mode;
int ret;
- ctrl = devm_spi_alloc_master(&pdev->dev, sizeof(struct stm32_spi));
+ slave_mode = of_property_read_bool(np, "spi-slave");
+
+ if (slave_mode)
+ ctrl = devm_spi_alloc_slave(&pdev->dev, sizeof(struct stm32_spi));
+ else
+ ctrl = devm_spi_alloc_master(&pdev->dev, sizeof(struct stm32_spi));
if (!ctrl) {
- dev_err(&pdev->dev, "spi master allocation failed\n");
+ dev_err(&pdev->dev, "spi controller allocation failed\n");
return -ENOMEM;
}
platform_set_drvdata(pdev, ctrl);
@@ -1774,6 +1814,7 @@ static int stm32_spi_probe(struct platform_device *pdev)
spi = spi_controller_get_devdata(ctrl);
spi->dev = &pdev->dev;
spi->ctrl = ctrl;
+ spi->slave_mode = slave_mode;
spin_lock_init(&spi->lock);
spi->cfg = (const struct stm32_spi_cfg *)
@@ -1856,6 +1897,8 @@ static int stm32_spi_probe(struct platform_device *pdev)
ctrl->transfer_one = stm32_spi_transfer_one;
ctrl->unprepare_message = stm32_spi_unprepare_msg;
ctrl->flags = spi->cfg->flags;
+ if (STM32_SPI_SLAVE_MODE(spi))
+ ctrl->slave_abort = stm32h7_spi_slave_abort;
spi->dma_tx = dma_request_chan(spi->dev, "tx");
if (IS_ERR(spi->dma_tx)) {
@@ -1901,7 +1944,8 @@ static int stm32_spi_probe(struct platform_device *pdev)
pm_runtime_mark_last_busy(&pdev->dev);
pm_runtime_put_autosuspend(&pdev->dev);
- dev_info(&pdev->dev, "driver initialized\n");
+ dev_info(&pdev->dev, "driver initialized (%s mode)\n",
+ STM32_SPI_MASTER_MODE(spi) ? "master" : "slave");
return 0;
--
2.25.1
Powered by blists - more mailing lists