[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230430-omap2-pdata-quirks-v1-1-e015f3a3ea46@linaro.org>
Date: Mon, 01 May 2023 11:05:21 +0200
From: Linus Walleij <linus.walleij@...aro.org>
To: Tony Lindgren <tony@...mide.com>,
Russell King <linux@...linux.org.uk>,
Bartosz Golaszewski <brgl@...ev.pl>,
Lee Jones <lee@...nel.org>,
Andreas Kemnade <andreas@...nade.info>
Cc: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>,
linux-arm-kernel@...ts.infradead.org, linux-omap@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
Linus Walleij <linus.walleij@...aro.org>
Subject: [PATCH 1/3] ARM/gpio: Push OMAP2 quirk down into TWL4030 driver
The TWL4030 GPIO driver has a custom platform data .set_up()
callback to call back into the platform and do misc stuff such
as hog and export a GPIO for WLAN PWR on a specific OMAP3 board.
Avoid all the kludgery in the platform data and the boardfile
and just put the quirks right into the driver. Make it
conditional on OMAP3.
I think the exported GPIO is used by some kind of userspace
so ordinary DTS hogs will probably not work.
Fixes: 92bf78b33b0b ("gpio: omap: use dynamic allocation of base")
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
---
arch/arm/mach-omap2/omap_device.c | 1 -
arch/arm/mach-omap2/pdata-quirks.c | 41 +-----------------------------
drivers/gpio/gpio-twl4030.c | 52 ++++++++++++++++++++++++++------------
include/linux/mfd/twl.h | 3 ---
4 files changed, 37 insertions(+), 60 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 4afa2f08e668..fca7869c8075 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -244,7 +244,6 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
case BUS_NOTIFY_ADD_DEVICE:
if (pdev->dev.of_node)
omap_device_build_from_dt(pdev);
- omap_auxdata_legacy_init(dev);
fallthrough;
default:
od = to_omap_device(pdev);
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 04208cc52784..c363ad8d6a06 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -6,6 +6,7 @@
*/
#include <linux/clk.h>
#include <linux/davinci_emac.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio/consumer.h>
#include <linux/gpio.h>
#include <linux/init.h>
@@ -41,7 +42,6 @@ struct pdata_init {
};
static struct of_dev_auxdata omap_auxdata_lookup[];
-static struct twl4030_gpio_platform_data twl_gpio_auxdata;
#ifdef CONFIG_MACH_NOKIA_N8X0
static void __init omap2420_n8x0_legacy_init(void)
@@ -98,22 +98,6 @@ static struct iommu_platform_data omap3_iommu_isp_pdata = {
};
#endif
-static int omap3_sbc_t3730_twl_callback(struct device *dev,
- unsigned gpio,
- unsigned ngpio)
-{
- int res;
-
- res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
- "wlan pwr");
- if (res)
- return res;
-
- gpiod_export(gpio_to_desc(gpio), 0);
-
- return 0;
-}
-
static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name)
{
int err = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, hub_name);
@@ -131,11 +115,6 @@ static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name)
msleep(1);
}
-static void __init omap3_sbc_t3730_twl_init(void)
-{
- twl_gpio_auxdata.setup = omap3_sbc_t3730_twl_callback;
-}
-
static void __init omap3_sbc_t3730_legacy_init(void)
{
omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
@@ -393,21 +372,6 @@ static struct ti_prm_platform_data ti_prm_pdata = {
.clkdm_lookup = clkdm_lookup,
};
-/*
- * GPIOs for TWL are initialized by the I2C bus and need custom
- * handing until DSS has device tree bindings.
- */
-void omap_auxdata_legacy_init(struct device *dev)
-{
- if (dev->platform_data)
- return;
-
- if (strcmp("twl4030-gpio", dev_name(dev)))
- return;
-
- dev->platform_data = &twl_gpio_auxdata;
-}
-
#if defined(CONFIG_ARCH_OMAP3) && IS_ENABLED(CONFIG_SND_SOC_OMAP_MCBSP)
static struct omap_mcbsp_platform_data mcbsp_pdata;
static void __init omap3_mcbsp_init(void)
@@ -427,9 +391,6 @@ static struct pdata_init auxdata_quirks[] __initdata = {
{ "nokia,n800", omap2420_n8x0_legacy_init, },
{ "nokia,n810", omap2420_n8x0_legacy_init, },
{ "nokia,n810-wimax", omap2420_n8x0_legacy_init, },
-#endif
-#ifdef CONFIG_ARCH_OMAP3
- { "compulab,omap3-sbc-t3730", omap3_sbc_t3730_twl_init, },
#endif
{ /* sentinel */ },
};
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index c1bb2c3ca6f2..446599ac234a 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -17,7 +17,9 @@
#include <linux/interrupt.h>
#include <linux/kthread.h>
#include <linux/irq.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio/driver.h>
+#include <linux/gpio/consumer.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/irqdomain.h>
@@ -465,8 +467,7 @@ static int gpio_twl4030_debounce(u32 debounce, u8 mmc_cd)
REG_GPIO_DEBEN1, 3);
}
-static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev,
- struct twl4030_gpio_platform_data *pdata)
+static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev)
{
struct twl4030_gpio_platform_data *omap_twl_info;
@@ -474,9 +475,6 @@ static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev,
if (!omap_twl_info)
return NULL;
- if (pdata)
- *omap_twl_info = *pdata;
-
omap_twl_info->use_leds = of_property_read_bool(dev->of_node,
"ti,use-leds");
@@ -504,9 +502,18 @@ static int gpio_twl4030_remove(struct platform_device *pdev)
return 0;
}
+/* Called from the registered devm action */
+static void gpio_twl4030_power_off_action(void *data)
+{
+ struct gpio_desc *d = data;
+
+ gpiod_unexport(d);
+ gpiochip_free_own_desc(d);
+}
+
static int gpio_twl4030_probe(struct platform_device *pdev)
{
- struct twl4030_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct twl4030_gpio_platform_data *pdata;
struct device_node *node = pdev->dev.of_node;
struct gpio_twl4030_priv *priv;
int ret, irq_base;
@@ -546,9 +553,7 @@ static int gpio_twl4030_probe(struct platform_device *pdev)
mutex_init(&priv->mutex);
- if (node)
- pdata = of_gpio_twl4030(&pdev->dev, pdata);
-
+ pdata = of_gpio_twl4030(&pdev->dev);
if (pdata == NULL) {
dev_err(&pdev->dev, "Platform data is missing\n");
return -ENXIO;
@@ -585,17 +590,32 @@ static int gpio_twl4030_probe(struct platform_device *pdev)
goto out;
}
- platform_set_drvdata(pdev, priv);
+ /*
+ * Special quirk for the OMAP3 to hog and export a WLAN power
+ * GPIO.
+ */
+ if (IS_ENABLED(CONFIG_ARCH_OMAP3) &&
+ of_machine_is_compatible("compulab,omap3-sbc-t3730")) {
+ struct gpio_desc *d;
- if (pdata->setup) {
- int status;
+ d = gpiochip_request_own_desc(&priv->gpio_chip,
+ 2, "wlan pwr",
+ GPIO_ACTIVE_HIGH,
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(d))
+ return dev_err_probe(&pdev->dev, PTR_ERR(d),
+ "unable to hog wlan pwr GPIO\n");
+
+ gpiod_export(d, 0);
+
+ ret = devm_add_action_or_reset(&pdev->dev, gpio_twl4030_power_off_action, d);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret,
+ "failed to install power off handler\n");
- status = pdata->setup(&pdev->dev, priv->gpio_chip.base,
- TWL4030_GPIO_MAX);
- if (status)
- dev_dbg(&pdev->dev, "setup --> %d\n", status);
}
+ platform_set_drvdata(pdev, priv);
out:
return ret;
}
diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h
index 6e3d99b7a0ee..c062d91a67d9 100644
--- a/include/linux/mfd/twl.h
+++ b/include/linux/mfd/twl.h
@@ -593,9 +593,6 @@ struct twl4030_gpio_platform_data {
*/
u32 pullups;
u32 pulldowns;
-
- int (*setup)(struct device *dev,
- unsigned gpio, unsigned ngpio);
};
struct twl4030_madc_platform_data {
--
2.34.1
Powered by blists - more mailing lists