[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230501143445.3851-5-quic_kriskura@quicinc.com>
Date: Mon, 1 May 2023 20:04:40 +0530
From: Krishna Kurapati <quic_kriskura@...cinc.com>
To: Thinh Nguyen <Thinh.Nguyen@...opsys.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
"Andy Gross" <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
"Konrad Dybcio" <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Felipe Balbi <balbi@...nel.org>,
Wesley Cheng <quic_wcheng@...cinc.com>
CC: <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<quic_pkondeti@...cinc.com>, <quic_ppratap@...cinc.com>,
<quic_jackp@...cinc.com>, <quic_harshq@...cinc.com>,
<ahalaney@...hat.com>, <quic_shazhuss@...cinc.com>,
Krishna Kurapati <quic_kriskura@...cinc.com>
Subject: [PATCH v7 4/9] usb: dwc3: core: Skip setting event buffers for host only controllers
On some SoC's like SA8295P where the tertiary controller is host-only
capable, GEVTADDRHI/LO, GEVTSIZ, GEVTCOUNT registers are not accessible.
Trying to setup them up during core_init leads to a crash.
For DRD/Peripheral supported controllers, event buffer setup is done
again in gadget_pullup. Skip setup or cleanup of event buffers if
controller is host-only capable.
Signed-off-by: Krishna Kurapati <quic_kriskura@...cinc.com>
---
drivers/usb/dwc3/core.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index b8ac7bcee391..8625fc5c7ab4 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -835,7 +835,12 @@ static void dwc3_clk_disable(struct dwc3 *dwc)
static void dwc3_core_exit(struct dwc3 *dwc)
{
- dwc3_event_buffers_cleanup(dwc);
+ unsigned int hw_mode;
+
+ hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+ if (hw_mode != DWC3_GHWPARAMS0_MODE_HOST)
+ dwc3_event_buffers_cleanup(dwc);
+
dwc3_phy_power_off(dwc);
dwc3_phy_exit(dwc);
dwc3_clk_disable(dwc);
@@ -1141,10 +1146,12 @@ static int dwc3_core_init(struct dwc3 *dwc)
if (ret)
goto err_exit_phy;
- ret = dwc3_event_buffers_setup(dwc);
- if (ret) {
- dev_err(dwc->dev, "failed to setup event buffers\n");
- goto err_power_off_phy;
+ if (hw_mode != DWC3_GHWPARAMS0_MODE_HOST) {
+ ret = dwc3_event_buffers_setup(dwc);
+ if (ret) {
+ dev_err(dwc->dev, "failed to setup event buffers\n");
+ goto err_power_off_phy;
+ }
}
/*
@@ -1958,7 +1965,10 @@ static int dwc3_probe(struct platform_device *pdev)
err_exit_debugfs:
dwc3_debugfs_exit(dwc);
- dwc3_event_buffers_cleanup(dwc);
+
+ if (hw_mode != DWC3_GHWPARAMS0_MODE_HOST)
+ dwc3_event_buffers_cleanup(dwc);
+
dwc3_phy_power_off(dwc);
dwc3_phy_exit(dwc);
dwc3_ulpi_exit(dwc);
--
2.40.0
Powered by blists - more mailing lists