linux-kernel - [PATCH RESEND v3 2/5] iio: adc: qcom-spmi-adc5: Use driver datasheet

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230502-iio-adc-propagate-fw-node-label-v3-2-6be5db6e6b5a@somainline.org>
Date:   Tue,  2 May 2023 01:17:34 +0200
From:   Marijn Suijten <marijn.suijten@...ainline.org>
To:     phone-devel@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...ainline.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Martin Botka <martin.botka@...ainline.org>,
        Jami Kettunen <jami.kettunen@...ainline.org>,
        Jonathan Cameron <jic23@...nel.org>,
        Lars-Peter Clausen <lars@...afoo.de>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>
Cc:     Marijn Suijten <marijn.suijten@...ainline.org>,
        linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-msm@...r.kernel.org
Subject: [PATCH RESEND v3 2/5] iio: adc: qcom-spmi-adc5: Use driver datasheet_name instead of DT label

iio_chan_spec::datasheet_name expects a channel/pin name on the hardware
part, i.e. from its datasheet, instead of a friendly name from DT which
typically describes the use of said channel.  GPIO channels are commonly
specialized in QCOM board DTS based on what a - typically thermistor -
is connected to.

Also rename adc5_channel_prop::datasheet_name to channel_name to that
effect.

Signed-off-by: Marijn Suijten <marijn.suijten@...ainline.org>
---
 drivers/iio/adc/qcom-spmi-adc5.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
index c2d5e06f137a7..6e4e5cb5cbbb7 100644
--- a/drivers/iio/adc/qcom-spmi-adc5.c
+++ b/drivers/iio/adc/qcom-spmi-adc5.c
@@ -114,7 +114,7 @@ enum adc5_cal_val {
  *	that is an average of multiple measurements.
  * @scale_fn_type: Represents the scaling function to convert voltage
  *	physical units desired by the client for the channel.
- * @datasheet_name: Channel name used in device tree.
+ * @channel_name: Channel name used in device tree.
  */
 struct adc5_channel_prop {
 	unsigned int		channel;
@@ -126,7 +126,7 @@ struct adc5_channel_prop {
 	unsigned int		hw_settle_time;
 	unsigned int		avg_samples;
 	enum vadc_scale_fn_type	scale_fn_type;
-	const char		*datasheet_name;
+	const char		*channel_name;
 };
 
 /**
@@ -671,7 +671,7 @@ static int adc5_get_fw_channel_data(struct adc5_chip *adc,
 	if (ret)
 		channel_name = name;
 
-	prop->datasheet_name = channel_name;
+	prop->channel_name = channel_name;
 
 	ret = fwnode_property_read_u32(fwnode, "qcom,decimation", &value);
 	if (!ret) {
@@ -861,8 +861,8 @@ static int adc5_get_fw_data(struct adc5_chip *adc)
 		adc_chan = &adc->data->adc_chans[prop.channel];
 
 		iio_chan->channel = prop.channel;
-		iio_chan->datasheet_name = prop.datasheet_name;
-		iio_chan->extend_name = prop.datasheet_name;
+		iio_chan->datasheet_name = adc_chan->datasheet_name;
+		iio_chan->extend_name = prop.channel_name;
 		iio_chan->info_mask_separate = adc_chan->info_mask;
 		iio_chan->type = adc_chan->type;
 		iio_chan->address = index;

-- 
2.40.1