| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230502221100.ecska23anlzv3iwq@synopsys.com>
Date: Tue, 2 May 2023 22:11:08 +0000
From: Thinh Nguyen <Thinh.Nguyen@...opsys.com>
To: Krishna Kurapati <quic_kriskura@...cinc.com>
CC: Thinh Nguyen <Thinh.Nguyen@...opsys.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Felipe Balbi <balbi@...nel.org>,
Wesley Cheng <quic_wcheng@...cinc.com>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-msm@...r.kernel.org" <linux-arm-msm@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"quic_pkondeti@...cinc.com" <quic_pkondeti@...cinc.com>,
"quic_ppratap@...cinc.com" <quic_ppratap@...cinc.com>,
"quic_jackp@...cinc.com" <quic_jackp@...cinc.com>,
"quic_harshq@...cinc.com" <quic_harshq@...cinc.com>,
"ahalaney@...hat.com" <ahalaney@...hat.com>,
"quic_shazhuss@...cinc.com" <quic_shazhuss@...cinc.com>
Subject: Re: [PATCH v7 5/9] usb: dwc3: core: Refactor PHY logic to support
Multiport Controller
On Mon, May 01, 2023, Krishna Kurapati wrote:
> Currently the DWC3 driver supports only single port controller
> which requires at most one HS and one SS PHY.
>
> But the DWC3 USB controller can be connected to multiple ports and
> each port can have their own PHYs. Each port of the multiport
> controller can either be HS+SS capable or HS only capable
> Proper quantification of them is required to modify GUSB2PHYCFG
> and GUSB3PIPECTL registers appropriately.
>
> Add support for detecting, obtaining and configuring phy's supported
> by a multiport controller and limit the max number of ports
> supported to 4.
>
> Signed-off-by: Harsh Agarwal <quic_harshq@...cinc.com>
> Signed-off-by: Krishna Kurapati <quic_kriskura@...cinc.com>
Are you a co-author or only Harsh is the main author of this patch?
> ---
> drivers/usb/dwc3/core.c | 262 +++++++++++++++++++++++++++++-----------
> drivers/usb/dwc3/core.h | 12 +-
> drivers/usb/dwc3/drd.c | 13 +-
> 3 files changed, 209 insertions(+), 78 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 8625fc5c7ab4..b91c3f965abc 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -121,6 +121,7 @@ static void __dwc3_set_mode(struct work_struct *work)
> struct dwc3 *dwc = work_to_dwc(work);
> unsigned long flags;
> int ret;
> + int i;
> u32 reg;
> u32 desired_dr_role;
>
> @@ -200,8 +201,10 @@ static void __dwc3_set_mode(struct work_struct *work)
> } else {
> if (dwc->usb2_phy)
> otg_set_vbus(dwc->usb2_phy->otg, true);
> - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
> - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
> + for (i = 0; i < dwc->num_usb2_ports; i++) {
> + phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
> + phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
> + }
> if (dwc->dis_split_quirk) {
> reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
> reg |= DWC3_GUCTL3_SPLITDISABLE;
> @@ -216,8 +219,8 @@ static void __dwc3_set_mode(struct work_struct *work)
>
> if (dwc->usb2_phy)
> otg_set_vbus(dwc->usb2_phy->otg, false);
> - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
> - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
> + phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
> + phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE);
>
> ret = dwc3_gadget_init(dwc);
> if (ret)
> @@ -575,22 +578,14 @@ static int dwc3_core_ulpi_init(struct dwc3 *dwc)
> return ret;
> }
>
> -/**
> - * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
> - * @dwc: Pointer to our controller context structure
> - *
> - * Returns 0 on success. The USB PHY interfaces are configured but not
> - * initialized. The PHY interfaces and the PHYs get initialized together with
> - * the core in dwc3_core_init.
> - */
> -static int dwc3_phy_setup(struct dwc3 *dwc)
> +static int dwc3_ss_phy_setup(struct dwc3 *dwc, int index)
> {
> unsigned int hw_mode;
> u32 reg;
>
> hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
>
> - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
> + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(index));
>
> /*
> * Make sure UX_EXIT_PX is cleared as that causes issues with some
> @@ -645,9 +640,19 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
> if (dwc->dis_del_phy_power_chg_quirk)
> reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
>
> - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
> + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(index), reg);
>
> - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> + return 0;
> +}
> +
> +static int dwc3_hs_phy_setup(struct dwc3 *dwc, int index)
> +{
> + unsigned int hw_mode;
> + u32 reg;
> +
> + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
> +
> + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(index));
>
> /* Select the HS PHY interface */
> switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) {
> @@ -659,7 +664,7 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
> } else if (dwc->hsphy_interface &&
> !strncmp(dwc->hsphy_interface, "ulpi", 4)) {
> reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI;
> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg);
> } else {
> /* Relying on default value. */
> if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI))
> @@ -726,7 +731,35 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
> if (dwc->ulpi_ext_vbus_drv)
> reg |= DWC3_GUSB2PHYCFG_ULPIEXTVBUSDRV;
>
> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg);
> +
> + return 0;
> +}
> +
> +/**
> + * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
> + * @dwc: Pointer to our controller context structure
> + *
> + * Returns 0 on success. The USB PHY interfaces are configured but not
> + * initialized. The PHY interfaces and the PHYs get initialized together with
> + * the core in dwc3_core_init.
> + */
> +static int dwc3_phy_setup(struct dwc3 *dwc)
> +{
> + int i;
> + int ret;
> +
> + for (i = 0; i < dwc->num_usb3_ports; i++) {
> + ret = dwc3_ss_phy_setup(dwc, i);
> + if (ret)
> + return ret;
> + }
> +
> + for (i = 0; i < dwc->num_usb2_ports; i++) {
> + ret = dwc3_hs_phy_setup(dwc, i);
> + if (ret)
> + return ret;
> + }
>
> return 0;
> }
> @@ -734,22 +767,36 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
> static int dwc3_phy_init(struct dwc3 *dwc)
> {
> int ret;
> + int i, j;
Minor style nit, can we declare in separate lines?
>
> usb_phy_init(dwc->usb2_phy);
> usb_phy_init(dwc->usb3_phy);
>
> - ret = phy_init(dwc->usb2_generic_phy);
> - if (ret < 0)
> - goto err_shutdown_usb3_phy;
> + for (i = 0; i < dwc->num_usb2_ports; i++) {
> + ret = phy_init(dwc->usb2_generic_phy[i]);
> + if (ret < 0) {
> + /* clean up prior initialized HS PHYs */
> + for (j = 0; j < i; j++)
> + phy_exit(dwc->usb2_generic_phy[j]);
> + goto err_shutdown_usb3_phy;
> + }
> + }
>
> - ret = phy_init(dwc->usb3_generic_phy);
> - if (ret < 0)
> - goto err_exit_usb2_phy;
> + for (i = 0; i < dwc->num_usb2_ports; i++) {
> + ret = phy_init(dwc->usb3_generic_phy[i]);
> + if (ret < 0) {
> + /* clean up prior initialized SS PHYs */
> + for (j = 0; j < i; j++)
> + phy_exit(dwc->usb3_generic_phy[j]);
> + goto err_exit_usb2_phy;
> + }
> + }
>
> return 0;
>
> err_exit_usb2_phy:
> - phy_exit(dwc->usb2_generic_phy);
> + for (i = 0; i < dwc->num_usb2_ports; i++)
> + phy_exit(dwc->usb2_generic_phy[i]);
> err_shutdown_usb3_phy:
> usb_phy_shutdown(dwc->usb3_phy);
> usb_phy_shutdown(dwc->usb2_phy);
> @@ -759,8 +806,12 @@ static int dwc3_phy_init(struct dwc3 *dwc)
>
> static void dwc3_phy_exit(struct dwc3 *dwc)
> {
> - phy_exit(dwc->usb3_generic_phy);
> - phy_exit(dwc->usb2_generic_phy);
> + int i;
> +
> + for (i = 0; i < dwc->num_usb2_ports; i++) {
> + phy_exit(dwc->usb3_generic_phy[i]);
> + phy_exit(dwc->usb2_generic_phy[i]);
> + }
>
> usb_phy_shutdown(dwc->usb3_phy);
> usb_phy_shutdown(dwc->usb2_phy);
> @@ -769,22 +820,36 @@ static void dwc3_phy_exit(struct dwc3 *dwc)
> static int dwc3_phy_power_on(struct dwc3 *dwc)
> {
> int ret;
> + int i, j;
>
> usb_phy_set_suspend(dwc->usb2_phy, 0);
> usb_phy_set_suspend(dwc->usb3_phy, 0);
>
> - ret = phy_power_on(dwc->usb2_generic_phy);
> - if (ret < 0)
> - goto err_suspend_usb3_phy;
> + for (i = 0; i < dwc->num_usb2_ports; i++) {
> + ret = phy_power_on(dwc->usb2_generic_phy[i]);
> + if (ret < 0) {
> + /* Turn off prior ON'ed HS Phy's */
> + for (j = 0; j < i; j++)
> + phy_power_off(dwc->usb2_generic_phy[j]);
> + goto err_suspend_usb3_phy;
> + }
> + }
>
> - ret = phy_power_on(dwc->usb3_generic_phy);
> - if (ret < 0)
> - goto err_power_off_usb2_phy;
> + for (i = 0; i < dwc->num_usb2_ports; i++) {
> + ret = phy_power_on(dwc->usb3_generic_phy[i]);
> + if (ret < 0) {
> + /* Turn of prior ON'ed SS Phy's */
> + for (j = 0; j < i; j++)
> + phy_power_off(dwc->usb3_generic_phy[j]);
> + goto err_power_off_usb2_phy;
> + }
> + }
>
> return 0;
>
> err_power_off_usb2_phy:
> - phy_power_off(dwc->usb2_generic_phy);
> + for (i = 0; i < dwc->num_usb2_ports; i++)
> + phy_power_off(dwc->usb2_generic_phy[i]);
> err_suspend_usb3_phy:
> usb_phy_set_suspend(dwc->usb3_phy, 1);
> usb_phy_set_suspend(dwc->usb2_phy, 1);
> @@ -794,8 +859,12 @@ static int dwc3_phy_power_on(struct dwc3 *dwc)
>
> static void dwc3_phy_power_off(struct dwc3 *dwc)
> {
> - phy_power_off(dwc->usb3_generic_phy);
> - phy_power_off(dwc->usb2_generic_phy);
> + int i;
> +
> + for (i = 0; i < dwc->num_usb2_ports; i++) {
> + phy_power_off(dwc->usb3_generic_phy[i]);
> + phy_power_off(dwc->usb2_generic_phy[i]);
> + }
>
> usb_phy_set_suspend(dwc->usb3_phy, 1);
> usb_phy_set_suspend(dwc->usb2_phy, 1);
> @@ -1073,6 +1142,7 @@ static int dwc3_core_init(struct dwc3 *dwc)
> unsigned int hw_mode;
> u32 reg;
> int ret;
> + int i;
>
> hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
>
> @@ -1116,15 +1186,19 @@ static int dwc3_core_init(struct dwc3 *dwc)
> if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD &&
> !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) {
> if (!dwc->dis_u3_susphy_quirk) {
> - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
> - reg |= DWC3_GUSB3PIPECTL_SUSPHY;
> - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
> + for (i = 0; i < dwc->num_usb3_ports; i++) {
> + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(i));
> + reg |= DWC3_GUSB3PIPECTL_SUSPHY;
> + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(i), reg);
> + }
> }
>
> if (!dwc->dis_u2_susphy_quirk) {
> - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> - reg |= DWC3_GUSB2PHYCFG_SUSPHY;
> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> + for (i = 0; i < dwc->num_usb2_ports; i++) {
> + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
> + reg |= DWC3_GUSB2PHYCFG_SUSPHY;
> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
> + }
> }
> }
>
> @@ -1281,6 +1355,42 @@ static int dwc3_core_init(struct dwc3 *dwc)
> return ret;
> }
>
> +static int dwc3_get_multiport_phys(struct dwc3 *dwc)
> +{
> + int ret;
> + struct device *dev = dwc->dev;
> + int i;
> + char phy_name[11];
Minor minor nit. Can we reorder this as follow:
struct device *dev = dwc->dev;
char phy_name[11];
int ret;
int i;
> +
> + /*
> + * Each port is at least HS capable. So loop over num_usb2_ports
> + * to get available phy's.
> + */
> + for (i = 0; i < dwc->num_usb2_ports; i++) {
> + sprintf(phy_name, "usb2-port%d", i);
> + dwc->usb2_generic_phy[i] = devm_phy_get(dev, phy_name);
> + if (IS_ERR(dwc->usb2_generic_phy[i])) {
> + ret = PTR_ERR(dwc->usb2_generic_phy[i]);
> + if (ret == -ENOSYS || ret == -ENODEV)
> + dwc->usb2_generic_phy[i] = NULL;
> + else
> + return dev_err_probe(dev, ret, "usb2 phy: %s not configured\n", phy_name);
> + }
> +
> + sprintf(phy_name, "usb3-port%d", i);
> + dwc->usb3_generic_phy[i] = devm_phy_get(dev, phy_name);
> + if (IS_ERR(dwc->usb3_generic_phy[i])) {
> + ret = PTR_ERR(dwc->usb3_generic_phy[i]);
> + if (ret == -ENOSYS || ret == -ENODEV)
> + dwc->usb3_generic_phy[i] = NULL;
> + else
> + return dev_err_probe(dev, ret, "usb3 phy: %s not configured\n", phy_name);
> + }
> + }
> +
> + return 0;
> +}
> +
> static int dwc3_core_get_phy(struct dwc3 *dwc)
> {
> struct device *dev = dwc->dev;
> @@ -1311,20 +1421,23 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
> return dev_err_probe(dev, ret, "no usb3 phy configured\n");
> }
>
> - dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
> - if (IS_ERR(dwc->usb2_generic_phy)) {
> - ret = PTR_ERR(dwc->usb2_generic_phy);
> + if (dwc->num_usb2_ports > 1)
> + return dwc3_get_multiport_phys(dwc);
> +
> + dwc->usb2_generic_phy[0] = devm_phy_get(dev, "usb2-phy");
> + if (IS_ERR(dwc->usb2_generic_phy[0])) {
> + ret = PTR_ERR(dwc->usb2_generic_phy[0]);
> if (ret == -ENOSYS || ret == -ENODEV)
> - dwc->usb2_generic_phy = NULL;
> + dwc->usb2_generic_phy[0] = NULL;
> else
> return dev_err_probe(dev, ret, "no usb2 phy configured\n");
> }
>
> - dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
> - if (IS_ERR(dwc->usb3_generic_phy)) {
> - ret = PTR_ERR(dwc->usb3_generic_phy);
> + dwc->usb3_generic_phy[0] = devm_phy_get(dev, "usb3-phy");
> + if (IS_ERR(dwc->usb3_generic_phy[0])) {
> + ret = PTR_ERR(dwc->usb3_generic_phy[0]);
> if (ret == -ENOSYS || ret == -ENODEV)
> - dwc->usb3_generic_phy = NULL;
> + dwc->usb3_generic_phy[0] = NULL;
> else
> return dev_err_probe(dev, ret, "no usb3 phy configured\n");
> }
> @@ -1336,6 +1449,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
> {
> struct device *dev = dwc->dev;
> int ret;
> + int i;
>
> switch (dwc->dr_mode) {
> case USB_DR_MODE_PERIPHERAL:
> @@ -1343,8 +1457,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
>
> if (dwc->usb2_phy)
> otg_set_vbus(dwc->usb2_phy->otg, false);
> - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
> - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
> + phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
> + phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE);
>
> ret = dwc3_gadget_init(dwc);
> if (ret)
> @@ -1355,8 +1469,10 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
>
> if (dwc->usb2_phy)
> otg_set_vbus(dwc->usb2_phy->otg, true);
> - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
> - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
> + for (i = 0; i < dwc->num_usb2_ports; i++) {
> + phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
> + phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
> + }
>
> ret = dwc3_host_init(dwc);
> if (ret)
> @@ -2046,6 +2162,7 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc)
>
> static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
> {
> + int i;
> unsigned long flags;
> u32 reg;
>
> @@ -2066,17 +2183,21 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
> /* Let controller to suspend HSPHY before PHY driver suspends */
> if (dwc->dis_u2_susphy_quirk ||
> dwc->dis_enblslpm_quirk) {
> - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> - reg |= DWC3_GUSB2PHYCFG_ENBLSLPM |
> - DWC3_GUSB2PHYCFG_SUSPHY;
> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> + for (i = 0; i < dwc->num_usb2_ports; i++) {
> + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
> + reg |= DWC3_GUSB2PHYCFG_ENBLSLPM |
> + DWC3_GUSB2PHYCFG_SUSPHY;
> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
> + }
>
> /* Give some time for USB2 PHY to suspend */
> usleep_range(5000, 6000);
> }
>
> - phy_pm_runtime_put_sync(dwc->usb2_generic_phy);
> - phy_pm_runtime_put_sync(dwc->usb3_generic_phy);
> + for (i = 0; i < dwc->num_usb2_ports; i++) {
> + phy_pm_runtime_put_sync(dwc->usb2_generic_phy[i]);
> + phy_pm_runtime_put_sync(dwc->usb3_generic_phy[i]);
> + }
> break;
> case DWC3_GCTL_PRTCAP_OTG:
> /* do nothing during runtime_suspend */
> @@ -2105,6 +2226,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
> {
> unsigned long flags;
> int ret;
> + int i;
> u32 reg;
>
> switch (dwc->current_dr_role) {
> @@ -2125,17 +2247,21 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
> break;
> }
> /* Restore GUSB2PHYCFG bits that were modified in suspend */
> - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> - if (dwc->dis_u2_susphy_quirk)
> - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
> + for (i = 0; i < dwc->num_usb2_ports; i++) {
> + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
> + if (dwc->dis_u2_susphy_quirk)
> + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
>
> - if (dwc->dis_enblslpm_quirk)
> - reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
> + if (dwc->dis_enblslpm_quirk)
> + reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
>
> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
> + }
>
> - phy_pm_runtime_get_sync(dwc->usb2_generic_phy);
> - phy_pm_runtime_get_sync(dwc->usb3_generic_phy);
> + for (i = 0; i < dwc->num_usb2_ports; i++) {
> + phy_pm_runtime_get_sync(dwc->usb2_generic_phy[i]);
> + phy_pm_runtime_get_sync(dwc->usb3_generic_phy[i]);
> + }
> break;
> case DWC3_GCTL_PRTCAP_OTG:
> /* nothing to do on runtime_resume */
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 21312703e053..0bba074b44e4 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -35,6 +35,9 @@
>
> #define DWC3_MSG_MAX 500
>
> +/* Number of ports supported by a multiport controller */
> +#define MAX_PORTS_SUPPORTED 4
> +
> /* Define XHCI Extcap register offsets for getting multiport info */
> #define XHCI_HCC_PARAMS_OFFSET 0x10
> #define DWC3_XHCI_HCSPARAMS1 0x04
> @@ -1038,8 +1041,8 @@ struct dwc3_scratchpad_array {
> * @usb3_phy: pointer to USB3 PHY
> * @num_usb2_ports: number of usb2 ports.
> * @num_usb3_ports: number of usb3 ports.
> - * @usb2_generic_phy: pointer to USB2 PHY
> - * @usb3_generic_phy: pointer to USB3 PHY
> + * @usb2_generic_phy: pointer to array of USB2 PHY
> + * @usb3_generic_phy: pointer to array of USB3 PHY
> * @phys_ready: flag to indicate that PHYs are ready
> * @ulpi: pointer to ulpi interface
> * @ulpi_ready: flag to indicate that ULPI is initialized
> @@ -1177,9 +1180,8 @@ struct dwc3 {
>
> u32 num_usb2_ports;
> u32 num_usb3_ports;
> -
> - struct phy *usb2_generic_phy;
> - struct phy *usb3_generic_phy;
> + struct phy *usb2_generic_phy[MAX_PORTS_SUPPORTED];
> + struct phy *usb3_generic_phy[MAX_PORTS_SUPPORTED];
>
> bool phys_ready;
>
> diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
> index 039bf241769a..0377295717ab 100644
> --- a/drivers/usb/dwc3/drd.c
> +++ b/drivers/usb/dwc3/drd.c
> @@ -328,6 +328,7 @@ static void dwc3_otg_device_exit(struct dwc3 *dwc)
> void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
> {
> int ret;
> + int i;
> u32 reg;
> int id;
> unsigned long flags;
> @@ -386,9 +387,11 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
> } else {
> if (dwc->usb2_phy)
> otg_set_vbus(dwc->usb2_phy->otg, true);
> - if (dwc->usb2_generic_phy)
> - phy_set_mode(dwc->usb2_generic_phy,
> - PHY_MODE_USB_HOST);
> + for (i = 0; i < dwc->num_usb2_ports; i++) {
> + if (dwc->usb2_generic_phy[i])
> + phy_set_mode(dwc->usb2_generic_phy[i],
> + PHY_MODE_USB_HOST);
> + }
> }
> break;
> case DWC3_OTG_ROLE_DEVICE:
> @@ -400,8 +403,8 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
>
> if (dwc->usb2_phy)
> otg_set_vbus(dwc->usb2_phy->otg, false);
> - if (dwc->usb2_generic_phy)
> - phy_set_mode(dwc->usb2_generic_phy,
> + if (dwc->usb2_generic_phy[0])
> + phy_set_mode(dwc->usb2_generic_phy[0],
> PHY_MODE_USB_DEVICE);
> ret = dwc3_gadget_init(dwc);
> if (ret)
> --
> 2.40.0
>
Thanks,
Thinh
Powered by blists - more mailing lists