[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230504194413.3806354-9-sashal@kernel.org>
Date: Thu, 4 May 2023 15:43:29 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: Justin Tee <justin.tee@...adcom.com>,
"Martin K . Petersen" <martin.petersen@...cle.com>,
Sasha Levin <sashal@...nel.org>, james.smart@...adcom.com,
dick.kennedy@...adcom.com, jejb@...ux.ibm.com,
linux-scsi@...r.kernel.org
Subject: [PATCH AUTOSEL 6.2 09/53] scsi: lpfc: Correct used_rpi count when devloss tmo fires with no recovery
From: Justin Tee <justin.tee@...adcom.com>
[ Upstream commit db651ec22524eb8f9c854fbb4d9acd5d7e5be9e4 ]
A fabric controller can sometimes send an RDP request right before a link
down event. Because of this outstanding RDP request, the driver does not
remove the last reference count on its ndlp causing a potential leak of RPI
resources when devloss tmo fires.
In lpfc_cmpl_els_rsp(), modify the NPIV clause to always allow the
lpfc_drop_node() routine to execute when not registered with SCSI
transport.
This relaxes the contraint that an NPIV ndlp must be in a specific state in
order to call lpfc_drop node. Logic is revised such that the
lpfc_drop_node() routine is always called to ensure the last ndlp decrement
occurs.
Signed-off-by: Justin Tee <justin.tee@...adcom.com>
Link: https://lore.kernel.org/r/20230301231626.9621-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@...cle.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/scsi/lpfc/lpfc_els.c | 24 +++++++++++++-----------
1 file changed, 13 insertions(+), 11 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 919741bbe267b..05719bd97f4d4 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5428,18 +5428,20 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
* these conditions and release the RPI.
*/
if (phba->sli_rev == LPFC_SLI_REV4 &&
- (vport && vport->port_type == LPFC_NPIV_PORT) &&
- !(ndlp->fc4_xpt_flags & SCSI_XPT_REGD) &&
- ndlp->nlp_flag & NLP_RELEASE_RPI) {
- if (ndlp->nlp_state != NLP_STE_PLOGI_ISSUE &&
- ndlp->nlp_state != NLP_STE_REG_LOGIN_ISSUE) {
- lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi);
- spin_lock_irq(&ndlp->lock);
- ndlp->nlp_rpi = LPFC_RPI_ALLOC_ERROR;
- ndlp->nlp_flag &= ~NLP_RELEASE_RPI;
- spin_unlock_irq(&ndlp->lock);
- lpfc_drop_node(vport, ndlp);
+ vport && vport->port_type == LPFC_NPIV_PORT &&
+ !(ndlp->fc4_xpt_flags & SCSI_XPT_REGD)) {
+ if (ndlp->nlp_flag & NLP_RELEASE_RPI) {
+ if (ndlp->nlp_state != NLP_STE_PLOGI_ISSUE &&
+ ndlp->nlp_state != NLP_STE_REG_LOGIN_ISSUE) {
+ lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi);
+ spin_lock_irq(&ndlp->lock);
+ ndlp->nlp_rpi = LPFC_RPI_ALLOC_ERROR;
+ ndlp->nlp_flag &= ~NLP_RELEASE_RPI;
+ spin_unlock_irq(&ndlp->lock);
+ }
}
+
+ lpfc_drop_node(vport, ndlp);
}
/* Release the originating I/O reference. */
--
2.39.2
Powered by blists - more mailing lists