| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230504194626.3807438-49-sashal@kernel.org>
Date: Thu, 4 May 2023 15:46:26 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: Max Chou <max.chou@...ltek.com>,
Luiz Augusto von Dentz <luiz.von.dentz@...el.com>,
Sasha Levin <sashal@...nel.org>, marcel@...tmann.org,
johan.hedberg@...il.com, luiz.dentz@...il.com,
linux-bluetooth@...r.kernel.org
Subject: [PATCH AUTOSEL 6.1 49/49] Bluetooth: btrtl: Add the support for RTL8851B
From: Max Chou <max.chou@...ltek.com>
[ Upstream commit 7948fe1c92d92313eea5453f83deb7f0141355e8 ]
Add the support for RTL8851B BT controller on USB interface.
The necessary firmware will be submitted to linux-firmware project.
Note that the Bluetooth devices WITH the VID=0x0bda would be set the
feature quirk in btrtl_setup_realtek(). It's able to ignore the
feature flag set for the specific VID and PID in blacklist_table[] of
btusb.c. (check [1])
If Realtek Bluetooth chips WITHOUT the VID=0x0bda, it shall be added
the feature flag for the specific VID and PID in blacklist_table[] of
btusb.c. (check [2])
[1] '9ab9235fe5cf ("Bluetooth: btrtl: Enable WBS for the specific
Realtek devices")'
[2] '73280f13c9bb ("Bluetooth: btusb: Add the more support IDs for
Realtek RTL8822CE")'
The device info from /sys/kernel/debug/usb/devices as below.
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 33 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0bda ProdID=b851 Rev= 0.00
S: Manufacturer=Realtek
S: Product=802.11ax WLAN Adapter
S: SerialNumber=00E04C885A01
C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Max Chou <max.chou@...ltek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@...el.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/bluetooth/btrtl.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 88f8c604d70a2..ead632595ce06 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -28,6 +28,7 @@
#define RTL_ROM_LMP_8761A 0x8761
#define RTL_ROM_LMP_8822B 0x8822
#define RTL_ROM_LMP_8852A 0x8852
+#define RTL_ROM_LMP_8851B 0x8851
#define RTL_CONFIG_MAGIC 0x8723ab55
#define IC_MATCH_FL_LMPSUBV (1 << 0)
@@ -56,6 +57,7 @@ enum btrtl_chip_id {
CHIP_ID_8852A = 18,
CHIP_ID_8852B = 20,
CHIP_ID_8852C = 25,
+ CHIP_ID_8851B = 36,
};
struct id_table {
@@ -244,6 +246,14 @@ static const struct id_table ic_id_table[] = {
.has_msft_ext = true,
.fw_name = "rtl_bt/rtl8852cu_fw.bin",
.cfg_name = "rtl_bt/rtl8852cu_config" },
+
+ /* 8851B */
+ { IC_INFO(RTL_ROM_LMP_8851B, 0xb, 0xc, HCI_USB),
+ .config_needed = false,
+ .has_rom_version = true,
+ .has_msft_ext = false,
+ .fw_name = "rtl_bt/rtl8851bu_fw.bin",
+ .cfg_name = "rtl_bt/rtl8851bu_config" },
};
static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev,
@@ -359,6 +369,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev,
{ RTL_ROM_LMP_8852A, 18 }, /* 8852A */
{ RTL_ROM_LMP_8852A, 20 }, /* 8852B */
{ RTL_ROM_LMP_8852A, 25 }, /* 8852C */
+ { RTL_ROM_LMP_8851B, 36 }, /* 8851B */
};
min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3;
@@ -848,6 +859,7 @@ int btrtl_download_firmware(struct hci_dev *hdev,
case RTL_ROM_LMP_8822B:
case RTL_ROM_LMP_8852A:
case RTL_ROM_LMP_8703B:
+ case RTL_ROM_LMP_8851B:
return btrtl_setup_rtl8723b(hdev, btrtl_dev);
default:
rtl_dev_info(hdev, "assuming no firmware upload needed");
@@ -872,6 +884,7 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
case CHIP_ID_8852A:
case CHIP_ID_8852B:
case CHIP_ID_8852C:
+ case CHIP_ID_8851B:
set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
hci_set_aosp_capable(hdev);
@@ -1075,3 +1088,5 @@ MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8851bu_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8851bu_config.bin");
--
2.39.2
Powered by blists - more mailing lists