| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 4 May 2023 06:25:44 +0000
From: Wyes Karny <wyes.karny@....com>
To: Thomas Renninger <trenn@...e.com>, Shuah Khan <shuah@...nel.org>
CC: <linux-pm@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
"Dominik Brodowski" <linux@...inikbrodowski.net>,
<gautham.shenoy@....com>, Wyes Karny <wyes.karny@....com>
Subject: [PATCH] cpupower: Make TSC read per CPU for Mperf monitor
System-wide TSC read could cause a drift in C0 percentage calculation.
Because if first TSC is read and then one by one mperf is read for all
cpus, this introduces drift between mperf reading of later CPUs and TSC
reading. To lower this drift read TSC per CPU and also just after mperf
read. This technique improves C0 percentage calculation in Mperf monitor.
Before fix: (System 100% busy)
| Mperf || RAPL || Idle_Stats
PKG|CORE| CPU| C0 | Cx | Freq || pack | core || POLL | C1 | C2
0| 0| 0| 87.15| 12.85| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 0| 256| 84.62| 15.38| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 1| 1| 87.15| 12.85| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 1| 257| 84.08| 15.92| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 2| 2| 86.61| 13.39| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 2| 258| 83.26| 16.74| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 3| 3| 86.61| 13.39| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 3| 259| 83.60| 16.40| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 4| 4| 86.33| 13.67| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 4| 260| 83.33| 16.67| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 5| 5| 86.06| 13.94| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 5| 261| 83.05| 16.95| 2695||168659003|3970468|| 0.00| 0.00| 0.00
0| 6| 6| 85.51| 14.49| 2695||168659003|3970468|| 0.00| 0.00| 0.00
After fix: (System 100% busy)
| Mperf || RAPL || Idle_Stats
PKG|CORE| CPU| C0 | Cx | Freq || pack | core || POLL | C1 | C2
0| 0| 0| 98.03| 1.97| 2415||163295480|3811189|| 0.00| 0.00| 0.00
0| 0| 256| 98.50| 1.50| 2394||163295480|3811189|| 0.00| 0.00| 0.00
0| 1| 1| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00
0| 1| 257| 99.99| 0.01| 2375||163295480|3811189|| 0.00| 0.00| 0.00
0| 2| 2| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00
0| 2| 258|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00
0| 3| 3|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00
0| 3| 259| 99.99| 0.01| 2435||163295480|3811189|| 0.00| 0.00| 0.00
0| 4| 4|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00
0| 4| 260|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00
0| 5| 5| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00
0| 5| 261|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00
0| 6| 6|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00
0| 6| 262|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00
Cc: Thomas Renninger <trenn@...e.com>
Cc: Shuah Khan <shuah@...nel.org>
Cc: Dominik Brodowski <linux@...inikbrodowski.net>
Fixes: 7fe2f6399a84 ("cpupowerutils - cpufrequtils extended with quite some features")
Signed-off-by: Wyes Karny <wyes.karny@....com>
---
.../utils/idle_monitor/mperf_monitor.c | 31 +++++++++----------
1 file changed, 14 insertions(+), 17 deletions(-)
diff --git a/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c
index e7d48cb563c0..ae6af354a81d 100644
--- a/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c
+++ b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c
@@ -70,8 +70,8 @@ static int max_freq_mode;
*/
static unsigned long max_frequency;
-static unsigned long long tsc_at_measure_start;
-static unsigned long long tsc_at_measure_end;
+static unsigned long long *tsc_at_measure_start;
+static unsigned long long *tsc_at_measure_end;
static unsigned long long *mperf_previous_count;
static unsigned long long *aperf_previous_count;
static unsigned long long *mperf_current_count;
@@ -169,7 +169,7 @@ static int mperf_get_count_percent(unsigned int id, double *percent,
aperf_diff = aperf_current_count[cpu] - aperf_previous_count[cpu];
if (max_freq_mode == MAX_FREQ_TSC_REF) {
- tsc_diff = tsc_at_measure_end - tsc_at_measure_start;
+ tsc_diff = tsc_at_measure_end[cpu] - tsc_at_measure_start[cpu];
*percent = 100.0 * mperf_diff / tsc_diff;
dprint("%s: TSC Ref - mperf_diff: %llu, tsc_diff: %llu\n",
mperf_cstates[id].name, mperf_diff, tsc_diff);
@@ -206,7 +206,7 @@ static int mperf_get_count_freq(unsigned int id, unsigned long long *count,
if (max_freq_mode == MAX_FREQ_TSC_REF) {
/* Calculate max_freq from TSC count */
- tsc_diff = tsc_at_measure_end - tsc_at_measure_start;
+ tsc_diff = tsc_at_measure_end[cpu] - tsc_at_measure_start[cpu];
time_diff = timespec_diff_us(time_start, time_end);
max_frequency = tsc_diff / time_diff;
}
@@ -225,33 +225,27 @@ static int mperf_get_count_freq(unsigned int id, unsigned long long *count,
static int mperf_start(void)
{
int cpu;
- unsigned long long dbg;
clock_gettime(CLOCK_REALTIME, &time_start);
- mperf_get_tsc(&tsc_at_measure_start);
- for (cpu = 0; cpu < cpu_count; cpu++)
+ for (cpu = 0; cpu < cpu_count; cpu++) {
+ mperf_get_tsc(&tsc_at_measure_start[cpu]);
mperf_init_stats(cpu);
+ }
- mperf_get_tsc(&dbg);
- dprint("TSC diff: %llu\n", dbg - tsc_at_measure_start);
return 0;
}
static int mperf_stop(void)
{
- unsigned long long dbg;
int cpu;
- for (cpu = 0; cpu < cpu_count; cpu++)
+ for (cpu = 0; cpu < cpu_count; cpu++) {
mperf_measure_stats(cpu);
+ mperf_get_tsc(&tsc_at_measure_end[cpu]);
+ }
- mperf_get_tsc(&tsc_at_measure_end);
clock_gettime(CLOCK_REALTIME, &time_end);
-
- mperf_get_tsc(&dbg);
- dprint("TSC diff: %llu\n", dbg - tsc_at_measure_end);
-
return 0;
}
@@ -353,7 +347,8 @@ struct cpuidle_monitor *mperf_register(void)
aperf_previous_count = calloc(cpu_count, sizeof(unsigned long long));
mperf_current_count = calloc(cpu_count, sizeof(unsigned long long));
aperf_current_count = calloc(cpu_count, sizeof(unsigned long long));
-
+ tsc_at_measure_start = calloc(cpu_count, sizeof(unsigned long long));
+ tsc_at_measure_end = calloc(cpu_count, sizeof(unsigned long long));
mperf_monitor.name_len = strlen(mperf_monitor.name);
return &mperf_monitor;
}
@@ -364,6 +359,8 @@ void mperf_unregister(void)
free(aperf_previous_count);
free(mperf_current_count);
free(aperf_current_count);
+ free(tsc_at_measure_start);
+ free(tsc_at_measure_end);
free(is_valid);
}
--
2.34.1
Powered by blists - more mailing lists