| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <a964eeef-1db0-0d8a-e2a5-9e4c5fd8b2f0@linaro.org>
Date: Thu, 4 May 2023 14:47:51 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Claudiu Beznea <claudiu.beznea@...rochip.com>,
mturquette@...libre.com, sboyd@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, nicolas.ferre@...rochip.com,
alexandre.belloni@...tlin.com
Cc: linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/5] dt-bindings: clocks: atmel,at91rm9200-pmc: convert to
yaml
On 04/05/2023 08:07, Claudiu Beznea wrote:
> Convert Atmel PMC documentation to yaml.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@...rochip.com>
Thank you for your patch. There is something to discuss/improve.
> diff --git a/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
> new file mode 100644
> index 000000000000..c4023c3a85f2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/atmel,at91rm9200-pmc.yaml
> @@ -0,0 +1,161 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/clock/atmel,at91rm9200-pmc.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
Drop quotes from both.
> +
> +title: Atmel Power Management Controller (PMC)
> +
> +maintainers:
> + - Claudiu Beznea <claudiu.beznea@...rochip.com>
> +
> +description:
> + The power management controller optimizes power consumption by controlling all
> + system and user peripheral clocks. The PMC enables/disables the clock inputs
> + to many of the peripherals and to the processor.
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - const: atmel,at91sam9260-pmc
Why this is separate, not part of bottom enum?
> + - const: syscon
> + - items:
> + - enum:
> + - atmel,at91sam9g20-pmc
> + - enum:
> + - atmel,at91sam9260-pmc
This should be const. You cannot have here different compatibles.
> + - const: syscon
> + - items:
> + - enum:
> + - atmel,at91sam9g15-pmc
> + - atmel,at91sam9g25-pmc
> + - atmel,at91sam9g35-pmc
> + - atmel,at91sam9x25-pmc
> + - atmel,at91sam9x35-pmc
> + - enum:
> + - atmel,at91sam9x5-pmc
> + - const: syscon
> + - items:
> + - enum:
> + - atmel,at91sam9g45-pmc
> + - atmel,at91sam9n12-pmc
> + - atmel,at91sam9rl-pmc
> + - atmel,at91rm9200-pmc
Order by name?
> + - atmel,sama5d4-pmc
> + - atmel,sama5d3-pmc
> + - atmel,sama5d2-pmc
> + - microchip,sam9x60-pmc
> + - microchip,sama7g5-pmc
> + - const: syscon
> +
> + reg:
> + maxItems: 1
> +
> + "#clock-cells":
> + const: 2
Explain what the cells are for in description. Having '2' for clock
controller is not obvious.
> +
> + clocks:
> + minItems: 2
> + maxItems: 3
> +
> + clock-names:
> + minItems: 2
> + maxItems: 3
> +
> + interrupts:
> + maxItems: 1
> +
> + atmel,osc-bypass:
> + type: boolean
> + description: set when a clock signal is directly provided on XIN
> +
> +
Just one blank line.
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - "#clock-cells"
> + - clocks
> + - clock-names
Keep the same order here as they appear in properties:.
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - microchip,sam9x60-pmc
> + - microchip,sama7g5-pmc
> + then:
> + properties:
> + clocks:
> + minItems: 3
> + maxItems: 3
> + clock-names:
> + items:
> + - const: td_slck
> + - const: md_slck
> + - const: main_xtal
> + required:
> + - clock-names
> + - clocks
Drop required: here. It's already in top-level. Same in places below.
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - atmel,at91rm9200-pmc
> + - atmel,at91sam9260-pmc
> + - atmel,at91sam9g20-pmc
> + then:
> + properties:
> + clocks:
> + minItems: 2
> + maxItems: 2
> + clock-names:
> + items:
> + - const: slow_xtal
> + - const: main_xtal
> + required:
> + - clock-names
> + - clocks
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - atmel,sama5d4-pmc
> + - atmel,sama5d3-pmc
> + - atmel,sama5d2-pmc
> + then:
> + properties:
> + clocks:
> + minItems: 2
> + maxItems: 2
> + clock-names:
> + items:
> + - const: slow_clk
> + - const: main_xtal
> + required:
> + - clock-names
> + - clocks
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + pmc: clock-controller@...18000 {
> + compatible = "atmel,sama5d4-pmc", "syscon";
> + reg = <0xf0018000 0x120>;
> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt looks a bit odd. Are you sure it is correct?
> + #clock-cells = <2>;
> + clocks = <&clk32k>, <&main_xtal>;
> + clock-names = "slow_clk", "main_xtal";
> + };
> +
> +...
Best regards,
Krzysztof
Powered by blists - more mailing lists