linux-kernel - [PATCH] spi: lpspi: disable lpspi module irq in DMA mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Fri,  5 May 2023 14:35:57 +0800
From:   Clark Wang <xiaoning.wang@....com>
To:     broonie@...nel.org
Cc:     linux-spi@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] spi: lpspi: disable lpspi module irq in DMA mode

When all bits of IER are set to 0, we still can observe the lpspi irq events
when using DMA mode to transfer data.

So disable irq to avoid the too much irq events.

Signed-off-by: Clark Wang <xiaoning.wang@....com>
---
 drivers/spi/spi-fsl-lpspi.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index f2341ab99556..4b70038ceb6b 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -910,9 +910,14 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
 	ret = fsl_lpspi_dma_init(&pdev->dev, fsl_lpspi, controller);
 	if (ret == -EPROBE_DEFER)
 		goto out_pm_get;
-
 	if (ret < 0)
 		dev_err(&pdev->dev, "dma setup error %d, use pio\n", ret);
+	else
+		/*
+		 * disable LPSPI module IRQ when enable DMA mode successfully,
+		 * to prevent the unexpected LPSPI module IRQ events.
+		 */
+		disable_irq(irq);
 
 	ret = devm_spi_register_controller(&pdev->dev, controller);
 	if (ret < 0) {
-- 
2.34.1