lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <f2b54fc5-81a6-45ae-0218-193a993333ab@starfivetech.com>
Date:   Sat, 6 May 2023 15:13:51 +0800
From:   Guo Samin <samin.guo@...rfivetech.com>
To:     Andrew Lunn <andrew@...n.ch>
CC:     <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <netdev@...r.kernel.org>, Peter Geis <pgwipeout@...il.com>,
        Frank <Frank.Sae@...or-comm.com>,
        "David S . Miller" <davem@...emloft.net>,
        "Eric Dumazet" <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        Yanhong Wang <yanhong.wang@...rfivetech.com>
Subject: Re: [PATCH v2 2/2] net: phy: motorcomm: Add pad drive strength cfg
 support


Re: [PATCH v2 2/2] net: phy: motorcomm: Add pad drive strength cfg support
From: Andrew Lunn <andrew@...n.ch>
to: Samin Guo <samin.guo@...rfivetech.com>
data: 2023/5/5

>>  #define YTPHY_DTS_OUTPUT_CLK_DIS		0
>> @@ -1495,6 +1504,7 @@ static int yt8531_config_init(struct phy_device *phydev)
>>  {
>>  	struct device_node *node = phydev->mdio.dev.of_node;
>>  	int ret;
>> +	u32 ds, val;
> 
> Reverse Christmas tree.  Sort these longest first, shortest last.
> 
Thanks, will fix.
> Otherwise this looks O.K.
> 
> The only open question is if real unit should be used, uA, not some
> magic numbers. Lets see what the DT Maintainers say.
> 
>       Andrew

Hi Andrew,

As I communicated with Frank, Motorcomm doesn't give specific units on their datasheet, except for magic numbers.
Tried to ask Motorcomm last week, but it seems that they themselves do not know what the unit is and have no response so far.


Below is all the relevant information I found:

Pad Drive Strength Cfg (EXT_0xA010)

Bit   |  Symbol           |  Access |  Default |  Description
15:13 |  Rgmii_sw_dr_rx   |  RW     |  0x3     |  Drive strenght of rx_clk pad.
                                               |  3'b111: strongest; 3'b000: weakest.

12    |  Rgmii_sw_dr[2]   |  RW     |  0x0     |  Bit 2 of Rgmii_sw_dr[2:0], refer to ext A010[5:4]

5:4   |  Rgmii_sw_dr[1:0] |  RW     |  0x3     |  Bit 1 and 0 of Rgmii_sw_dr, Drive strenght of rxd/rx_ctl rgmii pad.
                                               |  3'b111: strongest; 3'b000: weakest



Best regards,
Samin

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ