[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230506110918.GC10918@varda-linux.qualcomm.com>
Date: Sat, 6 May 2023 16:39:22 +0530
From: Varadarajan Narayanan <quic_varada@...cinc.com>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
CC: <agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <vkoul@...nel.org>,
<kishon@...nel.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <gregkh@...uxfoundation.org>,
<mturquette@...libre.com>, <sboyd@...nel.org>,
<quic_wcheng@...cinc.com>, <linux-arm-msm@...r.kernel.org>,
<linux-phy@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-usb@...r.kernel.org>,
<linux-clk@...r.kernel.org>
Subject: Re: [PATCH v10 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node
On Fri, May 05, 2023 at 12:29:54PM +0300, Dmitry Baryshkov wrote:
> On Fri, 5 May 2023 at 11:23, Varadarajan Narayanan
> <quic_varada@...cinc.com> wrote:
> >
> > Add LDO regulator node
>
> As this LDO is provided by the PMIC, it would be nice to know why it
> is modelled as an always-on regulator instead of the proper PMIC
> regulator. Up to now we were doing this only for the outstanding power
> rails like CX/MX or EBI.
These are always ON because USB phy doesn't support power
collapse, and there is a chance that other IP blocks might be
sharing the rail.
Thanks
Varada
> > Signed-off-by: Varadarajan Narayanan <quic_varada@...cinc.com>
> > ---
> > Changes in v10:
> > - Add LDO regulator node
> > ---
> > arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 7 +++++++
> > 1 file changed, 7 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > index bdc1434..1f5d14f 100644
> > --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > @@ -60,6 +60,13 @@
> > regulator-min-microvolt = <725000>;
> > regulator-max-microvolt = <1075000>;
> > };
> > +
> > + mp5496_l2: l2 {
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > };
> > };
> >
> > --
> > 2.7.4
> >
>
>
> --
> With best wishes
> Dmitry
Powered by blists - more mailing lists