[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230506225828.3a2d1ef0@slackpad.lan>
Date: Sat, 6 May 2023 22:58:28 +0100
From: Andre Przywara <andre.przywara@....com>
To: Maksim Kiselev <bigunclemax@...il.com>
Cc: Icenowy Zheng <icenowy@...c.io>, Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Samuel Holland <samuel@...lland.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
Cristian Ciocaltea <cristian.ciocaltea@...labora.com>,
Maxime Ripard <mripard@...nel.org>, linux-spi@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-sunxi@...ts.linux.dev, linux-kernel@...r.kernel.org,
linux-riscv@...ts.infradead.org
Subject: Re: [PATCH v2 2/6] spi: sun6i: change OF match data to a struct
On Sat, 6 May 2023 10:30:10 +0300
Maksim Kiselev <bigunclemax@...il.com> wrote:
> From: Icenowy Zheng <icenowy@...c.io>
>
> As we're adding more properties to the OF match data, convert it to a
> struct now.
Confirmed to be just a refactor of the existing code.
> Signed-off-by: Icenowy Zheng <icenowy@...c.io>
Even if you don't change anything, and just send a patch on her behalf,
you need to add you own Signed-off-by: (applies to the other patches as
well). With that fixed:
Reviewed-by: Andre Przywara <andre.przywara@....com>
Cheers,
Andre
> ---
> drivers/spi/spi-sun6i.c | 32 ++++++++++++++++++++++----------
> 1 file changed, 22 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
> index 7532c85a352c..01a01cd86db5 100644
> --- a/drivers/spi/spi-sun6i.c
> +++ b/drivers/spi/spi-sun6i.c
> @@ -85,6 +85,10 @@
> #define SUN6I_TXDATA_REG 0x200
> #define SUN6I_RXDATA_REG 0x300
>
> +struct sun6i_spi_cfg {
> + unsigned long fifo_depth;
> +};
> +
> struct sun6i_spi {
> struct spi_master *master;
> void __iomem *base_addr;
> @@ -99,7 +103,7 @@ struct sun6i_spi {
> const u8 *tx_buf;
> u8 *rx_buf;
> int len;
> - unsigned long fifo_depth;
> + const struct sun6i_spi_cfg *cfg;
> };
>
> static inline u32 sun6i_spi_read(struct sun6i_spi *sspi, u32 reg)
> @@ -156,7 +160,7 @@ static inline void sun6i_spi_fill_fifo(struct sun6i_spi *sspi)
> u8 byte;
>
> /* See how much data we can fit */
> - cnt = sspi->fifo_depth - sun6i_spi_get_tx_fifo_count(sspi);
> + cnt = sspi->cfg->fifo_depth - sun6i_spi_get_tx_fifo_count(sspi);
>
> len = min((int)cnt, sspi->len);
>
> @@ -289,14 +293,14 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
> * the hardcoded value used in old generation of Allwinner
> * SPI controller. (See spi-sun4i.c)
> */
> - trig_level = sspi->fifo_depth / 4 * 3;
> + trig_level = sspi->cfg->fifo_depth / 4 * 3;
> } else {
> /*
> * Setup FIFO DMA request trigger level
> * We choose 1/2 of the full fifo depth, that value will
> * be used as DMA burst length.
> */
> - trig_level = sspi->fifo_depth / 2;
> + trig_level = sspi->cfg->fifo_depth / 2;
>
> if (tfr->tx_buf)
> reg |= SUN6I_FIFO_CTL_TF_DRQ_EN;
> @@ -410,9 +414,9 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
> reg = SUN6I_INT_CTL_TC;
>
> if (!use_dma) {
> - if (rx_len > sspi->fifo_depth)
> + if (rx_len > sspi->cfg->fifo_depth)
> reg |= SUN6I_INT_CTL_RF_RDY;
> - if (tx_len > sspi->fifo_depth)
> + if (tx_len > sspi->cfg->fifo_depth)
> reg |= SUN6I_INT_CTL_TF_ERQ;
> }
>
> @@ -543,7 +547,7 @@ static bool sun6i_spi_can_dma(struct spi_master *master,
> * the fifo length we can just fill the fifo and wait for a single
> * irq, so don't bother setting up dma
> */
> - return xfer->len > sspi->fifo_depth;
> + return xfer->len > sspi->cfg->fifo_depth;
> }
>
> static int sun6i_spi_probe(struct platform_device *pdev)
> @@ -582,7 +586,7 @@ static int sun6i_spi_probe(struct platform_device *pdev)
> }
>
> sspi->master = master;
> - sspi->fifo_depth = (unsigned long)of_device_get_match_data(&pdev->dev);
> + sspi->cfg = of_device_get_match_data(&pdev->dev);
>
> master->max_speed_hz = 100 * 1000 * 1000;
> master->min_speed_hz = 3 * 1000;
> @@ -695,9 +699,17 @@ static void sun6i_spi_remove(struct platform_device *pdev)
> dma_release_channel(master->dma_rx);
> }
>
> +static const struct sun6i_spi_cfg sun6i_a31_spi_cfg = {
> + .fifo_depth = SUN6I_FIFO_DEPTH,
> +};
> +
> +static const struct sun6i_spi_cfg sun8i_h3_spi_cfg = {
> + .fifo_depth = SUN8I_FIFO_DEPTH,
> +};
> +
> static const struct of_device_id sun6i_spi_match[] = {
> - { .compatible = "allwinner,sun6i-a31-spi", .data = (void *)SUN6I_FIFO_DEPTH },
> - { .compatible = "allwinner,sun8i-h3-spi", .data = (void *)SUN8I_FIFO_DEPTH },
> + { .compatible = "allwinner,sun6i-a31-spi", .data = &sun6i_a31_spi_cfg },
> + { .compatible = "allwinner,sun8i-h3-spi", .data = &sun8i_h3_spi_cfg },
> {}
> };
> MODULE_DEVICE_TABLE(of, sun6i_spi_match);
Powered by blists - more mailing lists