linux-kernel - Re: [PATCH v2] dt-bindings: usb: Add binding for Microchip usb5744 hub controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <32aa46df-9ed5-7d2a-868f-a36414f54534@linaro.org>
Date:   Sun, 7 May 2023 10:07:11 +0200
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Michal Simek <michal.simek@....com>, linux-kernel@...r.kernel.org,
        monstr@...str.eu, michal.simek@...inx.com, git@...inx.com,
        ilias.apalodimas@...aro.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Piyush Mehta <piyush.mehta@....com>,
        Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
        linux-usb@...r.kernel.org
Subject: Re: [PATCH v2] dt-bindings: usb: Add binding for Microchip usb5744
 hub controller

On 05/05/2023 15:25, Michal Simek wrote:
> The Microchip usb5744 is a SS/HS USB 3.0 hub controller with 4 ports.
> The binding describes USB related aspects of the USB5744 hub, it as
> well cover the option of connecting the controller as an i2c slave.
> When i2c interface is connected hub needs to be initialized first.
> Hub itself has fixed i2c address 0x2D but hardcoding address is not good
> idea because address can be shifted by i2c address translator in the
> middle.
> 
> Signed-off-by: Piyush Mehta <piyush.mehta@....com>
> Signed-off-by: Michal Simek <michal.simek@....com>
> ---
> 
> Changes in v2:
> - fix i2c-bus property
> - swap usb2.0/3.0 compatible strings
> - fix indentation in example (4 spaces)
> - add new i2c node with microchip,usb5744 compatible property
> 
> It looks like that usb8041 has also an optional i2c interface which is not
> covered. But it is mentioned at commit 40e58a8a7ca6 ("dt-bindings: usb:
> Add binding for TI USB8041 hub controller").
> 
> i2c-bus name property was suggested by Rob at
> https://lore.kernel.org/all/CAL_JsqJedhX6typpUKbnzV7CLK6UZVjq3CyG9iY_j5DLPqvVdw@mail.gmail.com/
> and
> https://lore.kernel.org/all/CAL_JsqJZBbu+UXqUNdZwg-uv0PAsNg55026PTwhKr5wQtxCjVQ@mail.gmail.com/
> 
> the question is if adding address like this is acceptable.
> But it must be specified.
> 
> Driver will follow based on final dt-binding.
> 
> $ref: usb-device.yaml# should be also added but have no idea how to wire it
> up to be applied only on usb node not i2c one.
> 
> ---
>  .../bindings/usb/microchip,usb5744.yaml       | 110 ++++++++++++++++++
>  1 file changed, 110 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
> 
> diff --git a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
> new file mode 100644
> index 000000000000..7e0a3472ea95
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml
> @@ -0,0 +1,110 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/microchip,usb5744.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip USB5744 4-port Hub Controller
> +
> +description:
> +  Microchip's USB5744 SmartHubTM IC is a 4 port, SuperSpeed (SS)/Hi-Speed (HS),
> +  low power, low pin count configurable and fully compliant with the USB 3.1
> +  Gen 1 specification. The USB5744 also supports Full Speed (FS) and Low Speed
> +  (LS) USB signaling, offering complete coverage of all defined USB operating
> +  speeds. The new SuperSpeed hubs operate in parallel with the USB 2.0
> +  controller, so 5 Gbps SuperSpeed data transfers are not affected by slower
> +  USB 2.0 traffic.
> +
> +maintainers:
> +  - Piyush Mehta <piyush.mehta@....com>
> +  - Michal Simek <michal.simek@....com>
> +
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        const: microchip,usb5744
> +  required:
> +    - compatible

I don't understand why do you need this select. It basically disables
schema matching for other ones.

> +
> +properties:
> +  compatible:
> +    enum:
> +      - usb424,2744
> +      - usb424,5744
> +      - microchip,usb5744
> +
> +  reg: true

maxItems: 1

> +
> +required:
> +  - compatible
> +  - reg
> +


Best regards,
Krzysztof