| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230508184309.1628108-3-f.fainelli@gmail.com>
Date: Mon, 8 May 2023 11:43:08 -0700
From: Florian Fainelli <f.fainelli@...il.com>
To: netdev@...r.kernel.org
Cc: Florian Fainelli <f.fainelli@...il.com>,
Doug Berger <opendmb@...il.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@...adcom.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Marek Behún <kabel@...nel.org>,
Peter Geis <pgwipeout@...il.com>,
Frank <Frank.Sae@...or-comm.com>,
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH net-next 2/3] net: phy: broadcom: Add support for Wake-on-LAN
Add support for WAKE_UCAST, WAKE_MCAST, WAKE_BCAST, WAKE_MAGIC and
WAKE_MAGICSECURE. This is only supported with the BCM54210E and
compatible Ethernet PHYs. Using the in-band interrupt or an out of band
GPIO interrupts are supported.
Broadcom PHYs will generate a Wake-on-LAN level low interrupt on LED4 as
soon as one of the supported patterns is being matched. That includes
generating such an interrupt even if the PHY is operated during normal
modes. If WAKE_UCAST is selected, this could lead to the LED4 interrupt
firing up for every packet being received which is absolutely
undesirable from a performance point of view.
Because the Wake-on-LAN configuration can be set long before the system
is actually put to sleep, we cannot have an interrupt service routine to
clear on read the interrupt status register and ensure that new packet
matches will be detected.
It is desirable to enable the Wake-on-LAN interrupt as late as possible
during the system suspend process such that we limit the number of
interrupts to be handled by the system, but also conversely feed into
the Linux's system suspend way of dealing with interrupts in and around
the points of no return.
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
drivers/net/phy/bcm-phy-lib.c | 212 ++++++++++++++++++++++++++++++++++
drivers/net/phy/bcm-phy-lib.h | 5 +
drivers/net/phy/broadcom.c | 124 +++++++++++++++++++-
include/linux/brcmphy.h | 55 +++++++++
4 files changed, 392 insertions(+), 4 deletions(-)
diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
index b2c0baa51f39..27c57f6ab211 100644
--- a/drivers/net/phy/bcm-phy-lib.c
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -6,12 +6,14 @@
#include "bcm-phy-lib.h"
#include <linux/bitfield.h>
#include <linux/brcmphy.h>
+#include <linux/etherdevice.h>
#include <linux/export.h>
#include <linux/mdio.h>
#include <linux/module.h>
#include <linux/phy.h>
#include <linux/ethtool.h>
#include <linux/ethtool_netlink.h>
+#include <linux/netdevice.h>
#define MII_BCM_CHANNEL_WIDTH 0x2000
#define BCM_CL45VEN_EEE_ADV 0x3c
@@ -816,6 +818,216 @@ int bcm_phy_cable_test_get_status_rdb(struct phy_device *phydev,
}
EXPORT_SYMBOL_GPL(bcm_phy_cable_test_get_status_rdb);
+#define BCM54XX_WOL_SUPPORTED_MASK (WAKE_UCAST | \
+ WAKE_MCAST | \
+ WAKE_BCAST | \
+ WAKE_MAGIC | \
+ WAKE_MAGICSECURE)
+
+int bcm_phy_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
+{
+ struct net_device *ndev = phydev->attached_dev;
+ u8 da[ETH_ALEN], mask[ETH_ALEN];
+ unsigned int i;
+ u16 ctl;
+ int ret;
+
+ /* Allow a MAC driver to play through its own Wake-on-LAN
+ * implementation
+ */
+ if (wol->wolopts & ~BCM54XX_WOL_SUPPORTED_MASK)
+ return -EOPNOTSUPP;
+
+ /* The PHY supports passwords of 4, 6 and 8 bytes in size, but Linux's
+ * ethtool only supports 6, for now.
+ */
+ BUILD_BUG_ON(sizeof(wol->sopass) != ETH_ALEN);
+
+ /* Clear previous interrupts */
+ ret = bcm_phy_read_exp(phydev, BCM54XX_WOL_INT_STATUS);
+ if (ret < 0)
+ return ret;
+
+ ret = bcm_phy_read_exp(phydev, BCM54XX_WOL_MAIN_CTL);
+ if (ret < 0)
+ return ret;
+
+ ctl = ret;
+
+ if (!wol->wolopts) {
+ if (phy_interrupt_is_valid(phydev))
+ disable_irq_wake(phydev->irq);
+
+ /* Leave all interrupts disabled */
+ ret = bcm_phy_write_exp(phydev, BCM54XX_WOL_INT_MASK,
+ BCM54XX_WOL_ALL_INTRS);
+ if (ret < 0)
+ return ret;
+
+ /* Disable the global Wake-on-LAN enable bit */
+ ctl &= ~BCM54XX_WOL_EN;
+
+ return bcm_phy_write_exp(phydev, BCM54XX_WOL_MAIN_CTL, ctl);
+ }
+
+ /* Clear the previously configured mode and mask mode for Wake-on-LAN */
+ ctl &= ~(BCM54XX_WOL_MODE_MASK << BCM54XX_WOL_MODE_SHIFT);
+ ctl &= ~(BCM54XX_WOL_MASK_MODE_MASK << BCM54XX_WOL_MASK_MODE_SHIFT);
+ ctl &= ~BCM54XX_WOL_DIR_PKT_EN;
+ ctl &= ~(BCM54XX_WOL_SECKEY_OPT_MASK << BCM54XX_WOL_SECKEY_OPT_SHIFT);
+
+ /* When using WAKE_MAGIC, we program the magic pattern filter to match
+ * the device's MAC address and we accept any MAC DA in the Ethernet
+ * frame.
+ *
+ * When using WAKE_UCAST, WAKE_BCAST or WAKE_MCAST, we program the
+ * following:
+ * - WAKE_UCAST -> MAC DA is the device's MAC with a perfect match
+ * - WAKE_MCAST -> MAC DA is X1:XX:XX:XX:XX:XX where XX is don't care
+ * - WAKE_BCAST -> MAC DA is FF:FF:FF:FF:FF:FF with a perfect match
+ *
+ * Note that the Broadcast MAC DA is inherently going to match the
+ * multicast pattern being matched.
+ */
+ memset(mask, 0, sizeof(mask));
+
+ if (wol->wolopts & WAKE_MCAST) {
+ memset(da, 0, sizeof(da));
+ memset(mask, 0xff, sizeof(mask));
+ da[0] = 0x01;
+ mask[0] = ~da[0];
+ } else {
+ if (wol->wolopts & WAKE_UCAST) {
+ ether_addr_copy(da, ndev->dev_addr);
+ } else if (wol->wolopts & WAKE_BCAST) {
+ eth_broadcast_addr(da);
+ } else if (wol->wolopts & WAKE_MAGICSECURE) {
+ ether_addr_copy(da, wol->sopass);
+ } else if (wol->wolopts & WAKE_MAGIC) {
+ memset(da, 0, sizeof(da));
+ memset(mask, 0xff, sizeof(mask));
+ }
+ }
+
+ for (i = 0; i < ETH_ALEN / 2; i++) {
+ if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) {
+ ret = bcm_phy_write_exp(phydev,
+ BCM54XX_WOL_MPD_DATA1(2 - i),
+ ndev->dev_addr[i * 2] << 8 |
+ ndev->dev_addr[i * 2 + 1]);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = bcm_phy_write_exp(phydev, BCM54XX_WOL_MPD_DATA2(2 - i),
+ da[i * 2] << 8 | da[i * 2 + 1]);
+ if (ret < 0)
+ return ret;
+
+ ret = bcm_phy_write_exp(phydev, BCM54XX_WOL_MASK(2 - i),
+ mask[i * 2] << 8 | mask[i * 2 + 1]);
+ if (ret)
+ return ret;
+ }
+
+ if (wol->wolopts & WAKE_MAGICSECURE) {
+ ctl |= BCM54XX_WOL_SECKEY_OPT_6B <<
+ BCM54XX_WOL_SECKEY_OPT_SHIFT;
+ ctl |= BCM54XX_WOL_MODE_SINGLE_MPDSEC << BCM54XX_WOL_MODE_SHIFT;
+ ctl |= BCM54XX_WOL_MASK_MODE_DA_FF <<
+ BCM54XX_WOL_MASK_MODE_SHIFT;
+ } else {
+ if (wol->wolopts & WAKE_MAGIC)
+ ctl |= BCM54XX_WOL_MODE_SINGLE_MPD;
+ else
+ ctl |= BCM54XX_WOL_DIR_PKT_EN;
+ ctl |= BCM54XX_WOL_MASK_MODE_DA_ONLY <<
+ BCM54XX_WOL_MASK_MODE_SHIFT;
+ }
+
+ /* Globally enable Wake-on-LAN */
+ ctl |= BCM54XX_WOL_EN | BCM54XX_WOL_CRC_CHK;
+
+ ret = bcm_phy_write_exp(phydev, BCM54XX_WOL_MAIN_CTL, ctl);
+ if (ret < 0)
+ return ret;
+
+ /* Enable WOL interrupt on LED4 */
+ ret = bcm_phy_read_exp(phydev, BCM54XX_TOP_MISC_LED_CTL);
+ if (ret < 0)
+ return ret;
+
+ ret |= BCM54XX_LED4_SEL_INTR;
+ ret = bcm_phy_write_exp(phydev, BCM54XX_TOP_MISC_LED_CTL, ret);
+ if (ret < 0)
+ return ret;
+
+ /* Enable all Wake-on-LAN interrupt sources */
+ ret = bcm_phy_write_exp(phydev, BCM54XX_WOL_INT_MASK, 0);
+ if (ret < 0)
+ return ret;
+
+ if (phy_interrupt_is_valid(phydev))
+ enable_irq_wake(phydev->irq);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_set_wol);
+
+void bcm_phy_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
+{
+ struct net_device *ndev = phydev->attached_dev;
+ u8 da[ETH_ALEN];
+ unsigned int i;
+ int ret;
+ u16 ctl;
+
+ wol->supported = BCM54XX_WOL_SUPPORTED_MASK;
+ wol->wolopts = 0;
+
+ ret = bcm_phy_read_exp(phydev, BCM54XX_WOL_MAIN_CTL);
+ if (ret < 0)
+ return;
+
+ ctl = ret;
+
+ if (!(ctl & BCM54XX_WOL_EN))
+ return;
+
+ for (i = 0; i < sizeof(da) / 2; i++) {
+ ret = bcm_phy_read_exp(phydev,
+ BCM54XX_WOL_MPD_DATA2(2 - i));
+ if (ret < 0)
+ return;
+
+ da[i * 2] = ret >> 8;
+ da[i * 2 + 1] = ret & 0xff;
+ }
+
+ if (ctl & BCM54XX_WOL_DIR_PKT_EN) {
+ if (is_broadcast_ether_addr(da))
+ wol->wolopts |= WAKE_BCAST;
+ else if (is_multicast_ether_addr(da))
+ wol->wolopts |= WAKE_MCAST;
+ else if (ether_addr_equal(da, ndev->dev_addr))
+ wol->wolopts |= WAKE_UCAST;
+ } else {
+ ctl = (ctl >> BCM54XX_WOL_MODE_SHIFT) & BCM54XX_WOL_MODE_MASK;
+ switch (ctl) {
+ case BCM54XX_WOL_MODE_SINGLE_MPD:
+ wol->wolopts |= WAKE_MAGIC;
+ break;
+ case BCM54XX_WOL_MODE_SINGLE_MPDSEC:
+ wol->wolopts |= WAKE_MAGICSECURE;
+ memcpy(wol->sopass, da, sizeof(da));
+ break;
+ default:
+ break;
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(bcm_phy_get_wol);
+
MODULE_DESCRIPTION("Broadcom PHY Library");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Broadcom Corporation");
diff --git a/drivers/net/phy/bcm-phy-lib.h b/drivers/net/phy/bcm-phy-lib.h
index 9902fb182099..4337e4a5cade 100644
--- a/drivers/net/phy/bcm-phy-lib.h
+++ b/drivers/net/phy/bcm-phy-lib.h
@@ -9,6 +9,8 @@
#include <linux/brcmphy.h>
#include <linux/phy.h>
+struct ethtool_wolinfo;
+
/* 28nm only register definitions */
#define MISC_ADDR(base, channel) base, channel
@@ -106,4 +108,7 @@ static inline void bcm_ptp_stop(struct bcm_ptp_private *priv)
}
#endif
+int bcm_phy_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol);
+void bcm_phy_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol);
+
#endif /* _LINUX_BCM_PHY_LIB_H */
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 3f142dc266a9..a9dfa230495b 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -14,8 +14,12 @@
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/phy.h>
+#include <linux/pm_wakeup.h>
#include <linux/brcmphy.h>
#include <linux/of.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/gpio/consumer.h>
#define BRCM_PHY_MODEL(phydev) \
((phydev)->drv->phy_id & (phydev)->drv->phy_id_mask)
@@ -30,8 +34,17 @@ MODULE_LICENSE("GPL");
struct bcm54xx_phy_priv {
u64 *stats;
struct bcm_ptp_private *ptp;
+ int wake_irq;
+ bool wake_irq_enabled;
};
+static bool bcm54xx_phy_can_wakeup(struct phy_device *phydev)
+{
+ struct bcm54xx_phy_priv *priv = phydev->priv;
+
+ return phy_interrupt_is_valid(phydev) || priv->wake_irq >= 0;
+}
+
static int bcm54xx_config_clock_delay(struct phy_device *phydev)
{
int rc, val;
@@ -413,6 +426,16 @@ static int bcm54xx_config_init(struct phy_device *phydev)
bcm54xx_ptp_config_init(phydev);
+ /* Acknowledge any left over interrupt and charge the device for
+ * wake-up.
+ */
+ err = bcm_phy_read_exp(phydev, BCM54XX_WOL_INT_STATUS);
+ if (err < 0)
+ return err;
+
+ if (err)
+ pm_wakeup_event(&phydev->mdio.dev, 0);
+
return 0;
}
@@ -437,14 +460,38 @@ static int bcm54xx_iddq_set(struct phy_device *phydev, bool enable)
return ret;
}
-static int bcm54xx_suspend(struct phy_device *phydev)
+static int bcm54xx_set_wakeup_irq(struct phy_device *phydev, bool state)
{
+ struct bcm54xx_phy_priv *priv = phydev->priv;
int ret;
+ if (!bcm54xx_phy_can_wakeup(phydev))
+ return 0;
+
+ if (priv->wake_irq_enabled != state) {
+ if (state)
+ ret = enable_irq_wake(priv->wake_irq);
+ else
+ ret = disable_irq_wake(priv->wake_irq);
+ priv->wake_irq_enabled = state;
+ }
+
+ return ret;
+}
+
+static int bcm54xx_suspend(struct phy_device *phydev)
+{
+ int ret = 0;
+
bcm54xx_ptp_stop(phydev);
+ /* Acknowledge any Wake-on-LAN interrupt prior to suspend */
+ ret = bcm_phy_read_exp(phydev, BCM54XX_WOL_INT_STATUS);
+ if (ret < 0)
+ return ret;
+
if (phydev->wol_enabled)
- return 0;
+ return bcm54xx_set_wakeup_irq(phydev, true);
/* We cannot use a read/modify/write here otherwise the PHY gets into
* a bad state where its LEDs keep flashing, thus defeating the purpose
@@ -459,7 +506,13 @@ static int bcm54xx_suspend(struct phy_device *phydev)
static int bcm54xx_resume(struct phy_device *phydev)
{
- int ret;
+ int ret = 0;
+
+ if (phydev->wol_enabled) {
+ ret = bcm54xx_set_wakeup_irq(phydev, false);
+ if (ret)
+ return ret;
+ }
ret = bcm54xx_iddq_set(phydev, false);
if (ret < 0)
@@ -807,14 +860,54 @@ static int brcm_fet_suspend(struct phy_device *phydev)
return err;
}
+static void bcm54xx_phy_get_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ /* We cannot wake-up if we do not have a dedicated PHY interrupt line
+ * or an out of band GPIO descriptor for wake-up. Zeroing
+ * wol->supported allows the caller (MAC driver) to play through and
+ * offer its own Wake-on-LAN scheme if available.
+ */
+ if (!bcm54xx_phy_can_wakeup(phydev)) {
+ wol->supported = 0;
+ return;
+ }
+
+ bcm_phy_get_wol(phydev, wol);
+}
+
+static int bcm54xx_phy_set_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ int ret;
+
+ /* We cannot wake-up if we do not have a dedicated PHY interrupt line
+ * or an out of band GPIO descriptor for wake-up. Returning -EOPNOTSUPP
+ * allows the caller (MAC driver) to play through and offer its own
+ * Wake-on-LAN scheme if available.
+ */
+ if (!bcm54xx_phy_can_wakeup(phydev))
+ return -EOPNOTSUPP;
+
+ ret = bcm_phy_set_wol(phydev, wol);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
static int bcm54xx_phy_probe(struct phy_device *phydev)
{
struct bcm54xx_phy_priv *priv;
+ struct gpio_desc *wakeup_gpio;
+ int ret = 0;
priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
+ priv->wake_irq = -ENXIO;
+
phydev->priv = priv;
priv->stats = devm_kcalloc(&phydev->mdio.dev,
@@ -827,7 +920,28 @@ static int bcm54xx_phy_probe(struct phy_device *phydev)
if (IS_ERR(priv->ptp))
return PTR_ERR(priv->ptp);
- return 0;
+ /* We cannot utilize the _optional variant here since we want to know
+ * whether the GPIO descriptor exists or not to advertise Wake-on-LAN
+ * support or not.
+ */
+ wakeup_gpio = devm_gpiod_get(&phydev->mdio.dev, "wakeup", GPIOD_IN);
+ if (PTR_ERR(wakeup_gpio) == -EPROBE_DEFER)
+ return PTR_ERR(wakeup_gpio);
+
+ if (!IS_ERR(wakeup_gpio)) {
+ priv->wake_irq = gpiod_to_irq(wakeup_gpio);
+ ret = irq_set_irq_type(priv->wake_irq, IRQ_TYPE_LEVEL_LOW);
+ if (ret)
+ return ret;
+ }
+
+ /* If we do not have a main interrupt or a side-band wake-up interrupt,
+ * then the device cannot be marked as wake-up capable.
+ */
+ if (!bcm54xx_phy_can_wakeup(phydev))
+ return ret;
+
+ return device_init_wakeup(&phydev->mdio.dev, true);
}
static void bcm54xx_get_stats(struct phy_device *phydev,
@@ -910,6 +1024,8 @@ static struct phy_driver broadcom_drivers[] = {
.link_change_notify = bcm54xx_link_change_notify,
.suspend = bcm54xx_suspend,
.resume = bcm54xx_resume,
+ .get_wol = bcm54xx_phy_get_wol,
+ .set_wol = bcm54xx_phy_set_wol,
}, {
.phy_id = PHY_ID_BCM5461,
.phy_id_mask = 0xfffffff0,
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 9e77165f3ef6..e9afbfb6d7a5 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -89,6 +89,7 @@
#define MII_BCM54XX_EXP_SEL 0x17 /* Expansion register select */
#define MII_BCM54XX_EXP_SEL_TOP 0x0d00 /* TOP_MISC expansion register select */
#define MII_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */
+#define MII_BCM54XX_EXP_SEL_WOL 0x0e00 /* Wake-on-LAN expansion select register */
#define MII_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */
#define MII_BCM54XX_EXP_SEL_ETC 0x0d00 /* Expansion register spare + 2k mem */
@@ -253,6 +254,9 @@
#define BCM54XX_TOP_MISC_IDDQ_SD (1 << 2)
#define BCM54XX_TOP_MISC_IDDQ_SR (1 << 3)
+#define BCM54XX_TOP_MISC_LED_CTL (MII_BCM54XX_EXP_SEL_TOP + 0x0C)
+#define BCM54XX_LED4_SEL_INTR BIT(1)
+
/*
* BCM5482: Secondary SerDes registers
*/
@@ -272,6 +276,57 @@
#define BCM54612E_EXP_SPARE0 (MII_BCM54XX_EXP_SEL_ETC + 0x34)
#define BCM54612E_LED4_CLK125OUT_EN (1 << 1)
+
+/* Wake-on-LAN registers */
+#define BCM54XX_WOL_MAIN_CTL (MII_BCM54XX_EXP_SEL_WOL + 0x80)
+#define BCM54XX_WOL_EN BIT(0)
+#define BCM54XX_WOL_MODE_SINGLE_MPD 0
+#define BCM54XX_WOL_MODE_SINGLE_MPDSEC 1
+#define BCM54XX_WOL_MODE_DUAL 2
+#define BCM54XX_WOL_MODE_SHIFT 1
+#define BCM54XX_WOL_MODE_MASK 0x3
+#define BCM54XX_WOL_MP_MSB_FF_EN BIT(3)
+#define BCM54XX_WOL_SECKEY_OPT_4B 0
+#define BCM54XX_WOL_SECKEY_OPT_6B 1
+#define BCM54XX_WOL_SECKEY_OPT_8B 2
+#define BCM54XX_WOL_SECKEY_OPT_SHIFT 4
+#define BCM54XX_WOL_SECKEY_OPT_MASK 0x3
+#define BCM54XX_WOL_L2_TYPE_CHK BIT(6)
+#define BCM54XX_WOL_L4IPV4UDP_CHK BIT(7)
+#define BCM54XX_WOL_L4IPV6UDP_CHK BIT(8)
+#define BCM54XX_WOL_UDPPORT_CHK BIT(9)
+#define BCM54XX_WOL_CRC_CHK BIT(10)
+#define BCM54XX_WOL_SECKEY_MODE BIT(11)
+#define BCM54XX_WOL_RST BIT(12)
+#define BCM54XX_WOL_DIR_PKT_EN BIT(13)
+#define BCM54XX_WOL_MASK_MODE_DA_FF 0
+#define BCM54XX_WOL_MASK_MODE_DA_MPD 1
+#define BCM54XX_WOL_MASK_MODE_DA_ONLY 2
+#define BCM54XX_WOL_MASK_MODE_MPD 3
+#define BCM54XX_WOL_MASK_MODE_SHIFT 14
+#define BCM54XX_WOL_MASK_MODE_MASK 0x3
+
+#define BCM54XX_WOL_INNER_PROTO (MII_BCM54XX_EXP_SEL_WOL + 0x81)
+#define BCM54XX_WOL_OUTER_PROTO (MII_BCM54XX_EXP_SEL_WOL + 0x82)
+#define BCM54XX_WOL_OUTER_PROTO2 (MII_BCM54XX_EXP_SEL_WOL + 0x83)
+
+#define BCM54XX_WOL_MPD_DATA1(x) (MII_BCM54XX_EXP_SEL_WOL + 0x84 + (x))
+#define BCM54XX_WOL_MPD_DATA2(x) (MII_BCM54XX_EXP_SEL_WOL + 0x87 + (x))
+#define BCM54XX_WOL_SEC_KEY_8B (MII_BCM54XX_EXP_SEL_WOL + 0x8A)
+#define BCM54XX_WOL_MASK(x) (MII_BCM54XX_EXP_SEL_WOL + 0x8B + (x))
+#define BCM54XX_SEC_KEY_STORE(x) (MII_BCM54XX_EXP_SEL_WOL + 0x8E)
+#define BCM54XX_WOL_SHARED_CNT (MII_BCM54XX_EXP_SEL_WOL + 0x92)
+
+#define BCM54XX_WOL_INT_MASK (MII_BCM54XX_EXP_SEL_WOL + 0x93)
+#define BCM54XX_WOL_PKT1 BIT(0)
+#define BCM54XX_WOL_PKT2 BIT(1)
+#define BCM54XX_WOL_DIR BIT(2)
+#define BCM54XX_WOL_ALL_INTRS (BCM54XX_WOL_PKT1 | \
+ BCM54XX_WOL_PKT2 | \
+ BCM54XX_WOL_DIR)
+
+#define BCM54XX_WOL_INT_STATUS (MII_BCM54XX_EXP_SEL_WOL + 0x94)
+
/*****************************************************************************/
/* Fast Ethernet Transceiver definitions. */
/*****************************************************************************/
--
2.34.1
Powered by blists - more mailing lists