linux-kernel - [PATCH 1/3] ARM: dts: qcom: msm8226: Use XO from rpmcc where possible

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230509-msm8226-mmcc-parents-v1-1-83a2dfc986ab@z3ntu.xyz>
Date:   Tue, 09 May 2023 23:16:35 +0200
From:   Luca Weiss <luca@...tu.xyz>
To:     ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Jeffrey Hugo <quic_jhugo@...cinc.com>,
        Taniya Das <tdas@...eaurora.org>
Cc:     linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
        Luca Weiss <luca@...tu.xyz>
Subject: [PATCH 1/3] ARM: dts: qcom: msm8226: Use XO from rpmcc where
 possible

The xo clock being used everywhere actually goes via the RPM. Since the
rpmcc driver recently got support for this clock we can use this now.

Signed-off-by: Luca Weiss <luca@...tu.xyz>
---
 arch/arm/boot/dts/qcom-msm8226.dtsi | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
index 42acb9ddb8cc..4dd4e26c73a2 100644
--- a/arch/arm/boot/dts/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
@@ -176,7 +176,7 @@ sdhc_1: mmc@...24900 {
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
 				 <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&xo_board>;
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 			pinctrl-names = "default";
 			pinctrl-0 = <&sdhc1_default_state>;
@@ -192,7 +192,7 @@ sdhc_2: mmc@...a4900 {
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
 				 <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&xo_board>;
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 			pinctrl-names = "default";
 			pinctrl-0 = <&sdhc2_default_state>;
@@ -208,7 +208,7 @@ sdhc_3: mmc@...64900 {
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
 				 <&gcc GCC_SDCC3_APPS_CLK>,
-				 <&xo_board>;
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 			pinctrl-names = "default";
 			pinctrl-0 = <&sdhc3_default_state>;
@@ -362,7 +362,8 @@ usb_hs_phy: phy {
 					compatible = "qcom,usb-hs-phy-msm8226",
 						     "qcom,usb-hs-phy";
 					#phy-cells = <0>;
-					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+					clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+						 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
 					clock-names = "ref", "sleep";
 					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
 					reset-names = "phy", "por";
@@ -617,7 +618,7 @@ adsp: remoteproc@...00000 {
 			power-domains = <&rpmpd MSM8226_VDDCX>;
 			power-domain-names = "cx";
 
-			clocks = <&xo_board>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "xo";
 
 			memory-region = <&adsp_region>;

-- 
2.40.1