[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230509-strike-available-6b2378172a59-mkl@pengutronix.de>
Date: Tue, 9 May 2023 14:27:04 +0200
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: Rob Herring <robh@...nel.org>
Cc: Judith Mendez <jm@...com>,
Chandrasekar Ramakrishnan <rcsekar@...sung.com>,
Wolfgang Grandegger <wg@...ndegger.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, linux-can@...r.kernel.org,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Schuyler Patton <spatton@...com>, Nishanth Menon <nm@...com>,
Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
Oliver Hartkopp <socketcan@...tkopp.net>,
Simon Horman <simon.horman@...igine.com>
Subject: Re: [PATCH v4 1/4] dt-bindings: net: can: Add poll-interval for MCAN
On 05.05.2023 16:29:48, Rob Herring wrote:
> On Mon, May 01, 2023 at 05:46:21PM -0500, Judith Mendez wrote:
> > On AM62x SoC, MCANs on MCU domain do not have hardware interrupt
> > routed to A53 Linux, instead they will use software interrupt by
> > hrtimer. To enable timer method, interrupts should be optional so
> > remove interrupts property from required section and introduce
> > poll-interval property.
> >
> > Signed-off-by: Judith Mendez <jm@...com>
> > ---
> > Changelog:
> > v3:
> > 1. Move binding patch to first in series
> > 2. Update description for poll-interval
> > 3. Add oneOf to specify using interrupts/interrupt-names or poll-interval
> > 4. Fix example property: add comment below 'example'
> >
> > v2:
> > 1. Add poll-interval property to enable timer polling method
> > 2. Add example using poll-interval property
> >
> > .../bindings/net/can/bosch,m_can.yaml | 36 +++++++++++++++++--
> > 1 file changed, 34 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
> > index 67879aab623b..c024ee49962c 100644
> > --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
> > +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
> > @@ -14,6 +14,13 @@ maintainers:
> > allOf:
> > - $ref: can-controller.yaml#
> >
> > +oneOf:
> > + - required:
> > + - interrupts
> > + - interrupt-names
> > + - required:
> > + - poll-interval
>
> Move this next to 'required'.
>
> > +
> > properties:
> > compatible:
> > const: bosch,m_can
> > @@ -40,6 +47,14 @@ properties:
> > - const: int1
> > minItems: 1
> >
> > + poll-interval:
> > + $ref: /schemas/types.yaml#/definitions/flag
>
> This is a common property already defined as a uint32. You shouldn't
> define a new type.
>
> A flag doesn't even make sense. If that's all you need, then just enable
> polling if no interrupt is present.
Ok, then it's implicit. No IRQs -> polling.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung Nürnberg | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists