| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1ddb9ff9-2284-1f8b-69cc-e8d041a29ca1@quicinc.com>
Date: Tue, 9 May 2023 21:47:54 +0530
From: Manikanta Mylavarapu <quic_mmanikan@...cinc.com>
To: Rob Herring <robh@...nel.org>
CC: <agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <krzysztof.kozlowski+dt@...aro.org>,
<jassisinghbrar@...il.com>, <mathieu.poirier@...aro.org>,
<mturquette@...libre.com>, <sboyd@...nel.org>,
<quic_gurus@...cinc.com>, <loic.poulain@...aro.org>,
<quic_eberman@...cinc.com>, <robimarko@...il.com>,
<linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-remoteproc@...r.kernel.org>,
<linux-clk@...r.kernel.org>, <quic_srichara@...cinc.com>,
<quic_gokulsri@...cinc.com>, <quic_sjaganat@...cinc.com>,
<quic_kathirav@...cinc.com>, <quic_arajkuma@...cinc.com>,
<quic_anusha@...cinc.com>, <quic_poovendh@...cinc.com>
Subject: Re: [PATCH 01/11] dt-bindings: remoteproc: qcom: Add support for
multipd model
On 3/7/2023 7:56 PM, Rob Herring wrote:
> On Tue, Mar 07, 2023 at 10:11:27AM +0530, Manikanta Mylavarapu wrote:
>> Add new binding document for multipd model remoteproc.
>> IPQ5018, IPQ9574 follows multipd model.
>>
>> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@...cinc.com>
>> ---
>> .../bindings/remoteproc/qcom,multipd-pil.yaml | 282 ++++++++++++++++++
>> 1 file changed, 282 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
>> new file mode 100644
>> index 000000000000..b788607f5abd
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
>> @@ -0,0 +1,282 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/remoteproc/qcom,multipd-pil.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm Multipd Secure Peripheral Image Loader
>> +
>> +maintainers:
>> + - Bjorn Andersson <andersson@...nel.org>
>> + - Mathieu Poirier <mathieu.poirier@...aro.org>
>> +
>> +description:
>> + Multipd Peripheral Image Loader loads firmware and boots Q6 pd, WCSS pd
>> + remoteproc's on the Qualcomm IPQ5018, IPQ9574 SoC.
>
> What is PD? I don't see it defined anywhere.
>
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - qcom,ipq5018-q6-mpd
>> + - qcom,ipq9574-q6-mpd
>> +
>> + '#address-cells': true
>
> Need to define the size.
>
>> +
>> + '#size-cells': true
>
> ditto
>
>> +
>> + 'ranges': true
>
> Don't need quotes
>
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + interrupts-extended:
>
> Just 'interrupts'. Both forms are always supported.
>
>> + items:
>> + - description: Watchdog interrupt
>> + - description: Fatal interrupt
>> + - description: Ready interrupt
>> + - description: Handover interrupt
>> + - description: Stop acknowledge interrupt
>> +
>> + interrupt-names:
>> + items:
>> + - const: wdog
>> + - const: fatal
>> + - const: ready
>> + - const: handover
>> + - const: stop-ack
>> +
>> + clocks:
>> + minItems: 25
>> + maxItems: 25
>
> You need to list out what the clocks are.
>
>> +
>> + clock-names:
>> + minItems: 25
>> + maxItems: 25
>> +
>> + assigned-clocks:
>
> You can drop this. Implicitly supported.
>
Clocks in multipd architecture will be handled by QDSP6 firmware.
So i am going to remove clock handling.
>> + minItems: 13
>> + maxItems: 13
>> +
>> + assigned-clock-rates:
>> + minItems: 13
>> + maxItems: 13
>> +
>> + qcom,smem-states:
>> + $ref: /schemas/types.yaml#/definitions/phandle-array
>
> I believe this already has a type. It should be defined in a common
> schema if not already and then included in this schema.
>
>> + description: States used by the AP to signal the remoteprocessor
>> + items:
>> + - description: Shutdown Q6
>> + - description: Stop Q6
>> +
>> + qcom,smem-state-names:
>> + description:
>> + Names of the states used by the AP to signal the remoteprocessor
>> + items:
>> + - const: shutdown
>> + - const: stop
>> +
>> + memory-region:
>> + items:
>> + - description: Q6 pd reserved region
>> +
>> + glink-edge:
>> + $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
>> + description:
>> + Qualcomm G-Link subnode which represents communication edge, channels
>> + and devices related to the Modem.
>> +
>> +patternProperties:
>> + "^remoteproc_pd1|remoteproc_pd2|remoteproc_pd3":
>> + type: object
>> + description:
>> + In Multipd model, WCSS pd depends on Q6 pd i.e Q6 pd should be up before
>> + WCSS. It can be achieved by keeping wcss pd node as subnode of Q6
>> + device node.
>> +
>> + properties:
>> + compatible:
>> + enum:
>> + - "qcom,ipq5018-wcss-ahb-mpd"
>
> Don't need quotes.
>
>> + - "qcom,ipq9574-wcss-ahb-mpd"
>> + - "qcom,ipq5018-wcss-pcie-mpd"
>> +
>> + interrupts-extended:
>
> Just interrupts
>
>> + items:
>> + - description: Fatal interrupt
>> + - description: Ready interrupt
>> + - description: Spawn acknowledge interrupt
>> + - description: Stop acknowledge interrupt
>> +
>> + interrupt-names:
>> + items:
>> + - const: fatal
>> + - const: ready
>> + - const: spawn-ack
>> + - const: stop-ack
>> +
>> + qcom,smem-states:
>> + $ref: /schemas/types.yaml#/definitions/phandle-array
>> + description: States used by the AP to signal the remoteprocessor
>> + items:
>> + - description: Shutdown WCSS pd
>> + - description: Stop WCSS pd
>> + - description: Spawn WCSS pd
>> +
>> + qcom,smem-state-names:
>> + description:
>> + Names of the states used by the AP to signal the remoteprocessor
>> + items:
>> + - const: shutdown
>> + - const: stop
>> + - const: spawn
>> +
>> + required:
>> + - compatible
>> +
>> + additionalProperties: false
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - interrupts-extended
>> + - interrupt-names
>> + - qcom,smem-states
>> + - qcom,smem-state-names
>> + - memory-region
>> +
>> +additionalProperties: false
>> +
>> +allOf:
>> + - if:
>> + properties:
>> + compatible:
>> + enum:
>> + - qcom,ipq9574-q6-mpd
>> + then:
>> + properties:
>> + assigned-clocks:
>
> Don't need to define assigned-clocks
>
Clocks in multipd architecture will be handled by QDSP6 firmware.
So i am going to remove clock handling.
>> + items:
>> + - description: Phandle, clock specifier of GCC_ANOC_WCSS_AXI_M_CLK
>> + - description: Phandle, clock specifier of GCC_WCSS_AHB_S_CLK
>> + - description: Phandle, clock specifier of GCC_WCSS_ECAHB_CLK
>> + - description: Phandle, clock specifier of GCC_WCSS_ACMT_CLK
>> + - description: Phandle, clock specifier of GCC_WCSS_AXI_M_CLK
>> + - description: Phandle, clock specifier of GCC_Q6_AXIM_CLK
>> + - description: Phandle, clock specifier of GCC_Q6_AXIM2_CLK
>> + - description: Phandle, clock specifier of GCC_Q6_AHB_CLK
>> + - description: Phandle, clock specifier of GCC_Q6_AHB_S_CLK
>> + - description: Phandle, clock specifier of GCC_Q6SS_BOOT_CLK
>> + - description: Phandle, clock specifier of GCC_MEM_NOC_Q6_AXI_CLK
>> + - description: Phandle, clock specifier of GCC_WCSS_Q6_TBU_CLK
>> + - description: Phandle, clock specifier of GCC_SYS_NOC_WCSS_AHB_CLK
>> + assigned-clock-rates:
>> + items:
>> + - description: Must be 266666667 HZ
>> + - description: Must be 133333333 HZ
>> + - description: Must be 133333333 HZ
>> + - description: Must be 133333333 HZ
>> + - description: Must be 266666667 HZ
>> + - description: Must be 533000000 HZ
>> + - description: Must be 342857143 HZ
>> + - description: Must be 133333333 HZ
>> + - description: Must be 133333333 HZ
>> + - description: Must be 342857143 HZ
>> + - description: Must be 533000000 HZ
>> + - description: Must be 533000000 HZ
>> + - description: Must be 133333333 HZ
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/interrupt-controller/arm-gic.h>
>> + #include <dt-bindings/clock/qcom,gcc-ipq5018.h>
>> + #include <dt-bindings/reset/qcom,gcc-ipq5018.h>
>> +
>> + q6v5_wcss: remoteproc@...0000 {
>> + compatible = "qcom,ipq5018-q6-mpd";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> + reg = <0x0cd00000 0x4040>;
>> + interrupts-extended = <&intc GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
>> + <&wcss_smp2p_in 0 0>,
>> + <&wcss_smp2p_in 1 0>,
>> + <&wcss_smp2p_in 2 0>,
>> + <&wcss_smp2p_in 3 0>;
>> + interrupt-names = "wdog",
>> + "fatal",
>> + "ready",
>> + "handover",
>> + "stop-ack";
>> +
>> + qcom,smem-states = <&wcss_smp2p_out 0>,
>> + <&wcss_smp2p_out 1>;
>> + qcom,smem-state-names = "shutdown",
>> + "stop";
>> +
>> + memory-region = <&q6_region>;
>> +
>> + glink-edge {
>> + interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
>> + label = "rtr";
>> + qcom,remote-pid = <1>;
>> + mboxes = <&apcs_glb 8>;
>> + };
>> +
>> + q6_wcss_pd1: remoteproc_pd1 {
>> + compatible = "qcom,ipq5018-wcss-ahb-mpd";
>> + interrupts-extended = <&wcss_smp2p_in 8 0>,
>> + <&wcss_smp2p_in 9 0>,
>> + <&wcss_smp2p_in 12 0>,
>> + <&wcss_smp2p_in 11 0>;
>> + interrupt-names = "fatal",
>> + "ready",
>> + "spawn-ack",
>> + "stop-ack";
>> + qcom,smem-states = <&wcss_smp2p_out 8>,
>> + <&wcss_smp2p_out 9>,
>> + <&wcss_smp2p_out 10>;
>> + qcom,smem-state-names = "shutdown",
>> + "stop",
>> + "spawn";
>> + };
>> +
>> + q6_wcss_pd2: remoteproc_pd2 {
>> + compatible = "qcom,ipq5018-wcss-pcie-mpd";
>> + interrupts-extended = <&wcss_smp2p_in 16 0>,
>> + <&wcss_smp2p_in 17 0>,
>> + <&wcss_smp2p_in 20 0>,
>> + <&wcss_smp2p_in 19 0>;
>> + interrupt-names = "fatal",
>> + "ready",
>> + "spawn-ack",
>> + "stop-ack";
>> +
>> + qcom,smem-states = <&wcss_smp2p_out 16>,
>> + <&wcss_smp2p_out 17>,
>> + <&wcss_smp2p_out 18>;
>> + qcom,smem-state-names = "shutdown",
>> + "stop",
>> + "spawn";
>> + status = "okay";
>
> Don't need status in examples.
>
>> + };
>> +
>> + q6_wcss_pd3: remoteproc_pd3 {
>> + compatible = "qcom,ipq5018-wcss-pcie-mpd";
>> + interrupts-extended = <&wcss_smp2p_in 24 0>,
>> + <&wcss_smp2p_in 25 0>,
>> + <&wcss_smp2p_in 28 0>,
>> + <&wcss_smp2p_in 27 0>;
>> + interrupt-names = "fatal",
>> + "ready",
>> + "spawn-ack",
>> + "stop-ack";
>> +
>> + qcom,smem-states = <&wcss_smp2p_out 24>,
>> + <&wcss_smp2p_out 25>,
>> + <&wcss_smp2p_out 26>;
>> + qcom,smem-state-names = "shutdown",
>> + "stop",
>> + "spawn";
>> + status = "okay";
>> + };
>> + };
>> --
>> 2.34.1
>>
Thanks & Regards,
Manikanta.
Powered by blists - more mailing lists