linux-kernel - [PATCH v2 0/6] arm64: qcom: sm84[34]50: enable DP altmode on USB-C Connector

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230503-topic-sm8450-graphics-dp-next-v2-0-8acbbe1e9d14@linaro.org>
Date:   Wed, 10 May 2023 10:31:38 +0200
From:   Neil Armstrong <neil.armstrong@...aro.org>
To:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will@...nel.org>
Cc:     linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        Neil Armstrong <neil.armstrong@...aro.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH v2 0/6] arm64: qcom: sm84[34]50: enable DP altmode on USB-C
 Connector

This is the final step to achieve USB-C Altmode on the HDK8350
and HDK8450 now DP controller support, USB3+DP Combo PHY and
pmic glink support have been merged for those platforms.

This patchset depends on the QMP Combo USB3+DP PHY orientation
support at [1].

The following has been successfully tested:
- USB-C PD Power Role, reported status are coherent
- USB-C dual-role data
  - USB2.0 only (no-PD) as DFP or UFP
  - USB2.0 + USB SuperSpeed as DFP or UFP & in both orientations
  - USB2.0 + USB SuperSpeed + DisplayPort Altmode in both orientations
  - DisplayPort-only Altmode in both orientations

Data role and SuperSpeed lanes were correctly switched on the PHY
side after USB-C removal/insertion.

[1] https://lore.kernel.org/all/20230510031930.1996020-1-quic_bjorande@quicinc.com

Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
---
Changes in v2:
- rebased on next-230510 + orientation patchset v2
- define port@2 in patches 1 & 2
- Add reviewed tags
- Renamed fsa4480 node name
- Added missing blank line
- Moved status at last position
- Re-ordered node ref
- Fixed commit message of last patch
- Link to v1: https://lore.kernel.org/r/20230503-topic-sm8450-graphics-dp-next-v1-0-d1ee9397f2a6@linaro.org

---
Neil Armstrong (6):
      arm64: dts: qcom: sm8350: add ports subnodes in usb1 qmpphy node
      arm64: dts: qcom: sm8450: add ports subnodes in usb1 qmpphy node
      arm64: dts: qcom: sm8350-hdk: Add QMP & DP to SuperSpeed graph
      arm64: dts: qcom: sm8450-hdk: Add QMP & DP to SuperSpeed graph
      arm64: defconfig: enable FSA4480 driver as module
      qcom: pmic_glink: enable altmode for SM8450

 arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 76 ++++++++++++++++++++++++++++++++-
 arch/arm64/boot/dts/qcom/sm8350.dtsi    | 26 +++++++++++
 arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 73 ++++++++++++++++++++++++++++++-
 arch/arm64/boot/dts/qcom/sm8450.dtsi    | 26 +++++++++++
 arch/arm64/configs/defconfig            |  1 +
 drivers/soc/qcom/pmic_glink.c           |  8 +++-
 6 files changed, 204 insertions(+), 6 deletions(-)
---
base-commit: 4f3cab37420881679d82cecb21f18bc7d88fdd83
change-id: 20230503-topic-sm8450-graphics-dp-next-1dab962ae67d

Best regards,
-- 
Neil Armstrong <neil.armstrong@...aro.org>