Message-ID: <00000000000038bf4705fb536116@google.com>
Date:   Wed, 10 May 2023 02:20:15 -0700
From:   syzbot <syzbot+49207572d7fa5be562a0@...kaller.appspotmail.com>
To:     nogikh@...gle.com
Cc:     brgl@...ev.pl, linus.walleij@...aro.org,
        linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
        nogikh@...gle.com, syzkaller-bugs@...glegroups.com
Subject: Re: [syzbot] upstream boot error: BUG: unable to handle kernel NULL
 pointer dereference in do_page_fault

> FWIW this is a yet another manifestation of
> https://lore.kernel.org/all/CANp29Y4Q-VWEWeHmZu0f9tLLik1Va8oDF-s8hAeVkBZbX4K0gg@mail.gmail.com/
>
> #syz dup: upstream boot error: BUG: unable to handle kernel NULL

can't find the dup bug

> pointer dereference in load_balance
>
> On Tue, May 9, 2023 at 11:04 PM syzbot
> <syzbot+49207572d7fa5be562a0@...kaller.appspotmail.com> wrote:
>>
>> Hello,
>>
>> syzbot found the following issue on:
>>
>> HEAD commit:    ba0ad6ed89fd media: nxp: imx8-isi: fix buiding on 32-bit
>> git tree:       upstream
>> console output: https://syzkaller.appspot.com/x/log.txt?x=15c3d40c280000
>> kernel config:  https://syzkaller.appspot.com/x/.config?x=cc86fee67199911d
>> dashboard link: https://syzkaller.appspot.com/bug?extid=49207572d7fa5be562a0
>> compiler:       arm-linux-gnueabi-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
>> userspace arch: arm
>>
>> Downloadable assets:
>> disk image (non-bootable): https://storage.googleapis.com/syzbot-assets/c35b5b2731d2/non_bootable_disk-ba0ad6ed.raw.xz
>> vmlinux: https://storage.googleapis.com/syzbot-assets/590de311efa7/vmlinux-ba0ad6ed.xz
>> kernel image: https://storage.googleapis.com/syzbot-assets/7007b545886c/zImage-ba0ad6ed.xz
>>
>> IMPORTANT: if you fix the issue, please add the following tag to the commit:
>> Reported-by: syzbot+49207572d7fa5be562a0@...kaller.appspotmail.com
>>
>> Movable zone start for each node
>> Early memory node ranges
>>   node   0: [mem 0x0000000080000000-0x00000000ffffffff]
>> Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
>> percpu: Embedded 19 pages/cpu s47048 r8192 d22584 u77824
>> Kernel command line: root=/dev/vda console=ttyAMA0  earlyprintk=serial net.ifnames=0 sysctl.kernel.hung_task_all_cpu_backtrace=1 ima_policy=tcb nf-conntrack-ftp.ports=20000 nf-conntrack-tftp.ports=20000 nf-conntrack-sip.ports=20000 nf-conntrack-irc.ports=20000 nf-conntrack-sane.ports=20000 binder.debug_mask=0 rcupdate.rcu_expedited=1 rcupdate.rcu_cpu_stall_cputime=1 no_hash_pointers page_owner=on sysctl.vm.nr_hugepages=4 sysctl.vm.nr_overcommit_hugepages=4 secretmem.enable=1 sysctl.max_rcu_stall_to_panic=1 msr.allow_writes=off coredump_filter=0xffff root=/dev/vda console=ttyAMA0 vmalloc=512M smp.csd_lock_timeout=300000 watchdog_thresh=165 workqueue.watchdog_thresh=420 sysctl.net.core.netdev_unregister_timeout_secs=420 dummy_hcd.num=2 panic_on_warn=1
>> Unknown kernel command line parameters "earlyprintk=serial page_owner=on", will be passed to user space.
>> Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes, linear)
>> Inode-cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
>> Built 1 zonelists, mobility grouping on.  Total pages: 520868
>> allocated 2097152 bytes of page_ext
>> mem auto-init: stack:off, heap alloc:on, heap free:off
>> software IO TLB: area num 2.
>> software IO TLB: mapped [mem 0x00000000d9a47000-0x00000000dda47000] (64MB)
>> Memory: 1952316K/2097152K available (24576K kernel code, 2364K rwdata, 8404K rodata, 2048K init, 868K bss, 128452K reserved, 16384K cma-reserved, 524288K highmem)
>> SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>> trace event string verifier disabled
>> rcu: Preemptible hierarchical RCU implementation.
>> rcu:    RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
>> rcu:    RCU callback double-/use-after-free debug is enabled.
>>         All grace periods are expedited (rcu_expedited).
>>         Trampoline variant of Tasks RCU enabled.
>>         Tracing variant of Tasks RCU enabled.
>> rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
>> rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
>> NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
>> GIC physical location is 0x2c001000
>> rcu: srcu_init: Setting srcu_struct sizes based on contention.
>> sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
>> clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
>> arch_timer: cp15 timer(s) running at 62.50MHz (virt).
>> clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
>> sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns
>> Switching to timer-based delay loop, resolution 16ns
>> Console: colour dummy device 80x30
>> Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000)
>> pid_max: default: 32768 minimum: 301
>> LSM: initializing lsm=lockdown,capability,landlock,yama,safesetid,tomoyo,selinux,bpf,integrity
>> landlock: Up and running.
>> Yama: becoming mindful.
>> TOMOYO Linux initialized
>> SELinux:  Initializing.
>> LSM support for eBPF active
>> stackdepot: allocating hash table of 131072 entries via kvcalloc
>> Mount-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
>> Mountpoint-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
>> CPU: Testing write buffer coherency: ok
>> CPU0: Spectre BHB: enabling loop workaround for all CPUs
>> CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
>> 8<--- cut here ---
>> Unable to handle kernel NULL pointer dereference at virtual address 00000041 when read
>> [00000041] *pgd=80000080004003, *pmd=00000000
>> Internal error: Oops: 206 [#1] PREEMPT SMP ARM
>> Modules linked in:
>> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-rc1-syzkaller #0
>> Hardware name: ARM-Versatile Express
>> PC is at do_page_fault+0x14/0x3b8 arch/arm/mm/fault.c:276
>> LR is at gpiod_set_raw_value_commit+0x4c/0x168 drivers/gpio/gpiolib.c:3030
>> pc : [<802160d8>]    lr : [<808906c4>]    psr: 40000113
>> sp : 82601e08  ip : 82601e50  fp : 82601e4c
>> r10: 00000000  r9 : 827e1666  r8 : 00000001
>> r7 : 8261ae40  r6 : 00000001  r5 : 8404f4a8  r4 : 00000002
>> r3 : 802160c4  r2 : 00000001  r1 : 00000002  r0 : 831c0640
>> Flags: nZcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
>> Control: 30c5387d  Table: 80003000  DAC: fffffffd
>> Register r0 information: slab kmalloc-512 start 831c0600 pointer offset 64 size 512
>> Register r1 information: non-paged memory
>> Register r2 information: non-paged memory
>> Register r3 information: non-slab/vmalloc memory
>> Register r4 information: non-paged memory
>> Register r5 information: slab kmalloc-192 start 8404f480 pointer offset 40 size 192
>> Register r6 information: non-paged memory
>> Register r7 information: non-slab/vmalloc memory
>> Register r8 information: non-paged memory
>> Register r9 information: non-slab/vmalloc memory
>> Register r10 information: NULL pointer
>> Register r11 information: non-slab/vmalloc memory
>> Register r12 information: non-slab/vmalloc memory
>> Process swapper/0 (pid: 0, stack limit = 0x82600000)
>> Stack: (0x82601e08 to 0x82602000)
>> 1e00:                   80201410 80298db8 817f6f00 817f6de8 04200002 82604d40
>> 1e20: ffff8d67 00000002 8404f4a8 00000001 831c0640 00000001 827e1666 00000000
>> 1e40: 82601e7c 82601e50 808906c4 802160d0 00000003 8404f4a8 00000001 000000ff
>> 1e60: dddd1798 00000001 827e1666 00000000 82601e8c 82601e80 80890d54 80890684
>> 1e80: 82601ea4 82601e90 80891ae8 80890d0c 8326c9dc 000000ff 82601ebc 82601ea8
>> 1ea0: 8107f920 80891aa4 8326c9dc 000000ff 82601ecc 82601ec0 8107dd50 8107f8d0
>> 1ec0: 82601ee4 82601ed0 8107e09c 8107dd24 8326c9dc 84655294 82601f04 82601ee8
>> 1ee0: 8107ef38 8107e044 000001fd 8290cee4 00000002 dddd1798 82601f2c 82601f08
>> 1f00: 81080300 8107ef0c 00000000 8260c498 8261ae40 8260c4e0 00000000 827e1666
>> 1f20: 82601f3c 82601f30 80208efc 8108025c 82601f84 82601f40 80293570 80208ef4
>> 1f40: 8260c440 00000000 81f86214 824af2f8 817f6f00 cbc96766 82601f84 000000ea
>> 1f60: 82625c7c 8260c440 00000000 8261a934 8260c440 82850000 82601f94 82601f88
>> 1f80: 80293b00 80293500 82601fa4 82601f98 817f7c74 80293aec 82601fb4 82601fa8
>> 1fa0: 82400bb8 817f7ba4 82601ff4 82601fb8 824012f8 82400bb4 00000000 00000000
>> 1fc0: 00000000 00000000 ffffffff 00000000 00000000 820ad698 82484a70 00000000
>> 1fe0: 00000000 000008e0 00000000 82601ff8 00000000 82400c24 00000000 00000000
>> Backtrace:
>> [<802160c4>] (do_page_fault) from [<808906c4>] (gpiod_set_raw_value_commit+0x4c/0x168 drivers/gpio/gpiolib.c:3030)
>>  r10:00000000 r9:827e1666 r8:00000001 r7:831c0640 r6:00000001 r5:8404f4a8
>>  r4:00000002
>> [<80890678>] (gpiod_set_raw_value_commit) from [<80890d54>] (gpiod_set_value_nocheck+0x54/0x58 drivers/gpio/gpiolib.c:3204)
>>  r10:00000000 r9:827e1666 r8:00000001 r7:dddd1798 r6:000000ff r5:00000001
>>  r4:8404f4a8 r3:00000003
>> [<80890d00>] (gpiod_set_value_nocheck) from [<80891ae8>] (gpiod_set_value+0x50/0xc0 drivers/gpio/gpiolib.c:3223)
>> [<80891a98>] (gpiod_set_value) from [<8107f920>] (gpio_led_set+0x5c/0x60 drivers/leds/leds-gpio.c:54)
>>  r5:000000ff r4:8326c9dc
>> [<8107f8c4>] (gpio_led_set) from [<8107dd50>] (__led_set_brightness drivers/leds/led-core.c:47 [inline])
>> [<8107f8c4>] (gpio_led_set) from [<8107dd50>] (led_set_brightness_nopm drivers/leds/led-core.c:271 [inline])
>> [<8107f8c4>] (gpio_led_set) from [<8107dd50>] (led_set_brightness_nosleep+0x38/0x5c drivers/leds/led-core.c:287)
>>  r5:000000ff r4:8326c9dc
>> [<8107dd18>] (led_set_brightness_nosleep) from [<8107e09c>] (led_set_brightness+0x64/0x68 drivers/leds/led-core.c:264)
>> [<8107e038>] (led_set_brightness) from [<8107ef38>] (led_trigger_event drivers/leds/led-triggers.c:390 [inline])
>> [<8107e038>] (led_set_brightness) from [<8107ef38>] (led_trigger_event+0x38/0x50 drivers/leds/led-triggers.c:380)
>>  r5:84655294 r4:8326c9dc
>> [<8107ef00>] (led_trigger_event) from [<81080300>] (ledtrig_cpu+0xb0/0x100 drivers/leds/trigger/ledtrig-cpu.c:86)
>>  r7:dddd1798 r6:00000002 r5:8290cee4 r4:000001fd
>> [<81080250>] (ledtrig_cpu) from [<80208efc>] (arch_cpu_idle_exit+0x14/0x18 arch/arm/kernel/process.c:98)
>>  r9:827e1666 r8:00000000 r7:8260c4e0 r6:8261ae40 r5:8260c498 r4:00000000
>> [<80208ee8>] (arch_cpu_idle_exit) from [<80293570>] (do_idle+0x7c/0x2f0 kernel/sched/idle.c:284)
>> [<802934f4>] (do_idle) from [<80293b00>] (cpu_startup_entry+0x20/0x24 kernel/sched/idle.c:379)
>>  r10:82850000 r9:8260c440 r8:8261a934 r7:00000000 r6:8260c440 r5:82625c7c
>>  r4:000000ea
>> [<80293ae0>] (cpu_startup_entry) from [<817f7c74>] (rest_init+0xdc/0xe0 init/main.c:735)
>> [<817f7b98>] (rest_init) from [<82400bb8>] (arch_post_acpi_subsys_init+0x0/0x20 init/main.c:834)
>> [<82400ba8>] (arch_call_rest_init) from [<824012f8>] (start_kernel+0x6e0/0x70c init/main.c:1088)
>> [<82400c18>] (start_kernel) from [<00000000>] (0x0)
>> Code: e92ddff0 e24cb004 e24dd01c ee1d7f70 (e5923040)
>> ---[ end trace 0000000000000000 ]---
>> ----------------
>> Code disassembly (best guess):
>>    0:   e92ddff0        push    {r4, r5, r6, r7, r8, r9, sl, fp, ip, lr, pc}
>>    4:   e24cb004        sub     fp, ip, #4
>>    8:   e24dd01c        sub     sp, sp, #28
>>    c:   ee1d7f70        mrc     15, 0, r7, cr13, cr0, {3}
>> * 10:   e5923040        ldr     r3, [r2, #64]   ; 0x40 <-- trapping instruction
>>
>>
>> ---
>> This report is generated by a bot. It may contain errors.
>> See https://goo.gl/tpsmEJ for more information about syzbot.
>> syzbot engineers can be reached at syzkaller@...glegroups.com.
>>
>> syzbot will keep track of this issue. See:
>> https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
>>
>> If the bug is already fixed, let syzbot know by replying with:
>> #syz fix: exact-commit-title
>>
>> If you want to change bug's subsystems, reply with:
>> #syz set subsystems: new-subsystem
>> (See the list of subsystem names on the web dashboard)
>>
>> If the bug is a duplicate of another bug, reply with:
>> #syz dup: exact-subject-of-another-report
>>
>> If you want to undo deduplication, reply with:
>> #syz undup
>>
>> --
>> You received this message because you are subscribed to the Google Groups "syzkaller-bugs" group.
>> To unsubscribe from this group and stop receiving emails from it, send an email to syzkaller-bugs+unsubscribe@...glegroups.com.
>> To view this discussion on the web visit https://groups.google.com/d/msgid/syzkaller-bugs/000000000000f9c9a505fb4917f6%40google.com.

Powered by blists - more mailing lists