linux-kernel - [PATCH net-next v3 0/3] Support for Wake-on-LAN for Broadcom PHYs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230511172110.2243275-1-f.fainelli@gmail.com>
Date:   Thu, 11 May 2023 10:21:07 -0700
From:   Florian Fainelli <f.fainelli@...il.com>
To:     netdev@...r.kernel.org
Cc:     Florian Fainelli <f.fainelli@...il.com>,
        Doug Berger <opendmb@...il.com>,
        Broadcom internal kernel review list 
        <bcm-kernel-feedback-list@...adcom.com>,
        "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet <edumazet@...gle.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>, Andrew Lunn <andrew@...n.ch>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        Marek Behún <kabel@...nel.org>,
        Peter Geis <pgwipeout@...il.com>,
        Frank <Frank.Sae@...or-comm.com>,
        linux-kernel@...r.kernel.org (open list)
Subject: [PATCH net-next v3 0/3] Support for Wake-on-LAN for Broadcom PHYs

This patch series adds support for Wake-on-LAN to the Broadcom PHY
driver. Specifically the BCM54210E/B50212E are capable of supporting
Wake-on-LAN using an external pin typically wired up to a system's GPIO.

These PHY operate a programmable Ethernet MAC destination address
comparator which will fire up an interrupt whenever a match is received.
Because of that, it was necessary to introduce patch #1 which allows the
PHY driver's ->suspend() routine to be called unconditionally. This is
necessary in our case because we need a hook point into the device
suspend/resume flow to enable the wake-up interrupt as late as possible.

Patch #2 adds support for the Broadcom PHY library and driver for
Wake-on-LAN proper with the WAKE_UCAST, WAKE_MCAST, WAKE_BCAST,
WAKE_MAGIC and WAKE_MAGICSECURE. Note that WAKE_FILTER is supportable,
however this will require further discussions and be submitted as a RFC
series later on.

Patch #3 updates the GENET driver to defer to the PHY for Wake-on-LAN if
the PHY supports it, thus allowing the MAC to be powered down to
conserve power.

Changes in v3:

- collected Reviewed-by tags
- explicitly use return 0 in bcm54xx_phy_probe() (Paolo)

Changes in v2:

- introduce PHY_ALWAYS_CALL_SUSPEND and only have the Broadcom PHY
  driver set this flag to minimize changes to the suspend flow to only
  drivers that need it

- corrected possibly uninitialized variable in bcm54xx_set_wakeup_irq
  (Simon)

Florian Fainelli (3):
  net: phy: Allow drivers to always call into ->suspend()
  net: phy: broadcom: Add support for Wake-on-LAN
  net: bcmgenet: Add support for PHY-based Wake-on-LAN

 .../ethernet/broadcom/genet/bcmgenet_wol.c    |  14 ++
 drivers/net/phy/bcm-phy-lib.c                 | 212 ++++++++++++++++++
 drivers/net/phy/bcm-phy-lib.h                 |   5 +
 drivers/net/phy/broadcom.c                    | 126 ++++++++++-
 drivers/net/phy/phy_device.c                  |   5 +-
 include/linux/brcmphy.h                       |  55 +++++
 include/linux/phy.h                           |   4 +
 7 files changed, 416 insertions(+), 5 deletions(-)

-- 
2.34.1