linux-kernel - [PATCH v4 0/3] arm64: meson: support Amlogic A1 USB OTG controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230511210455.6634-1-ddrokosov@sberdevices.ru>
Date:   Fri, 12 May 2023 00:04:52 +0300
From:   Dmitry Rokosov <ddrokosov@...rdevices.ru>
To:     <gregkh@...uxfoundation.org>, <robh+dt@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>, <neil.armstrong@...aro.org>,
        <khilman@...libre.com>, <jbrunet@...libre.com>,
        <martin.blumenstingl@...glemail.com>, <mturquette@...libre.com>,
        <vkoul@...nel.org>, <kishon@...nel.org>, <hminas@...opsys.com>,
        <Thinh.Nguyen@...opsys.com>
CC:     <yue.wang@...ogic.com>, <hanjie.lin@...ogic.com>,
        <kernel@...rdevices.ru>, <rockosov@...il.com>,
        <linux-usb@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-amlogic@...ts.infradead.org>,
        <linux-phy@...ts.infradead.org>,
        Dmitry Rokosov <ddrokosov@...rdevices.ru>
Subject: [PATCH v4 0/3] arm64: meson: support Amlogic A1 USB OTG controller

This patch series introduces full support for the Amlogic A1 USB controller
in OTG mode (peripheral and host modes switching).

Previously, Amlogic's patch series [1] was applied to the upstream tree,
but it only had USB host mode support.
Furthermore, the device tree patchset [2] wasn't merged due to a missing
clk driver.
Patchset [2] has been completely reworked:
    - changed register base offsets to proper values
    - introduced dwc2 in peripheral mode
    - OTG mode support
    - the SoB of Amlogic authors still remain

Testing:
    - USB OTG role switching between gadget and host - OK
    - Peripheral mode - OK (tested with adb shell/push/pop)
    - Host mode - OK (tested only USB enumeration and detection)

Changes v4 since v3 at [5]:
    - remove the dtsi patchset from series because it is dependent on the
      A1 clock bindings, which are not resolved yet; this is due to the
      fact that the A1 clock drivers are currently under review
    - remove the patchset for phy as it has already been applied by Vinod
      to phy/next at [6]

Changes v3 since v2 at [4]:
    - if reset_control_reset() fails during phy_exit() callback
      execution, do not disable clkin, instead, return an error
      immediately
    - provide proper 'phy-names' for the dwc2 device tree node as
      'usb2-phy' instead of 'usb2_phy' (replace underscore with dash)

Changes v2 since v1 at [3]:
    - as Martin suggested in v1, this commit completely removes
      the 'otg_switch_supported' parameter from dwc3_meson_g12a_drvdata;
      this parameter is no longer necessary as all IP versions now
      support OTG switching
    - this commit moves the USB PHY clkin enable/disable calls to
      the PHY init/exit routines

Links:
    [1] https://lore.kernel.org/all/1581990859-135234-1-git-send-email-hanjie.lin@amlogic.com/
    [2] https://lore.kernel.org/all/1581990859-135234-4-git-send-email-hanjie.lin@amlogic.com/
    [3] https://lore.kernel.org/all/20230414152423.19842-1-ddrokosov@sberdevices.ru/
    [4] https://lore.kernel.org/all/20230418111612.19479-1-ddrokosov@sberdevices.ru/
    [5] https://lore.kernel.org/all/20230426102922.19705-1-ddrokosov@sberdevices.ru/
    [6] https://lore.kernel.org/all/ZFjAmCcc%2F35MhcuI@matsya/

Dmitry Rokosov (3):
  usb: dwc2: support dwc2 IP for Amlogic A1 SoC family
  dt-bindings: usb: dwc2: add support for Amlogic A1 SoC USB peripheral
  usb: dwc3-meson-g12a: support OTG switch for all IP versions

 .../devicetree/bindings/usb/dwc2.yaml         |  1 +
 drivers/usb/dwc2/params.c                     | 21 +++++++++++++++++++
 drivers/usb/dwc3/dwc3-meson-g12a.c            | 16 +++-----------
 3 files changed, 25 insertions(+), 13 deletions(-)

-- 
2.36.0