lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <cb04d8e1-f2ab-8a5f-5c2c-fde125cbb243@linaro.org>
Date:   Thu, 11 May 2023 10:38:16 +0200
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Luca Weiss <luca@...tu.xyz>, ~postmarketos/upstreaming@...ts.sr.ht,
        phone-devel@...r.kernel.org, Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Jeffrey Hugo <quic_jhugo@...cinc.com>,
        Taniya Das <tdas@...eaurora.org>
Cc:     linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org
Subject: Re: [PATCH 1/3] ARM: dts: qcom: msm8226: Use XO from rpmcc where
 possible



On 9.05.2023 23:16, Luca Weiss wrote:
> The xo clock being used everywhere actually goes via the RPM. Since the
> rpmcc driver recently got support for this clock we can use this now.
> 
> Signed-off-by: Luca Weiss <luca@...tu.xyz>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>

Konrad
>  arch/arm/boot/dts/qcom-msm8226.dtsi | 11 ++++++-----
>  1 file changed, 6 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
> index 42acb9ddb8cc..4dd4e26c73a2 100644
> --- a/arch/arm/boot/dts/qcom-msm8226.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
> @@ -176,7 +176,7 @@ sdhc_1: mmc@...24900 {
>  			interrupt-names = "hc_irq", "pwr_irq";
>  			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>  				 <&gcc GCC_SDCC1_APPS_CLK>,
> -				 <&xo_board>;
> +				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
>  			clock-names = "iface", "core", "xo";
>  			pinctrl-names = "default";
>  			pinctrl-0 = <&sdhc1_default_state>;
> @@ -192,7 +192,7 @@ sdhc_2: mmc@...a4900 {
>  			interrupt-names = "hc_irq", "pwr_irq";
>  			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
>  				 <&gcc GCC_SDCC2_APPS_CLK>,
> -				 <&xo_board>;
> +				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
>  			clock-names = "iface", "core", "xo";
>  			pinctrl-names = "default";
>  			pinctrl-0 = <&sdhc2_default_state>;
> @@ -208,7 +208,7 @@ sdhc_3: mmc@...64900 {
>  			interrupt-names = "hc_irq", "pwr_irq";
>  			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
>  				 <&gcc GCC_SDCC3_APPS_CLK>,
> -				 <&xo_board>;
> +				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
>  			clock-names = "iface", "core", "xo";
>  			pinctrl-names = "default";
>  			pinctrl-0 = <&sdhc3_default_state>;
> @@ -362,7 +362,8 @@ usb_hs_phy: phy {
>  					compatible = "qcom,usb-hs-phy-msm8226",
>  						     "qcom,usb-hs-phy";
>  					#phy-cells = <0>;
> -					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
> +					clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
> +						 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
>  					clock-names = "ref", "sleep";
>  					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
>  					reset-names = "phy", "por";
> @@ -617,7 +618,7 @@ adsp: remoteproc@...00000 {
>  			power-domains = <&rpmpd MSM8226_VDDCX>;
>  			power-domain-names = "cx";
>  
> -			clocks = <&xo_board>;
> +			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
>  			clock-names = "xo";
>  
>  			memory-region = <&adsp_region>;
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ