linux-kernel - [PATCH v4 3/3] riscv: dts: starfive: add the node and pins configuration for tdm

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20230511091549.28003-4-walker.chen@starfivetech.com>
Date:   Thu, 11 May 2023 17:15:49 +0800
From:   Walker Chen <walker.chen@...rfivetech.com>
To:     Mark Brown <broonie@...nel.org>,
        Liam Girdwood <lgirdwood@...il.com>,
        Claudiu Beznea <Claudiu.Beznea@...rochip.com>,
        Jaroslav Kysela <perex@...ex.cz>,
        Takashi Iwai <tiwai@...e.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor.dooley@...rochip.com>,
        Emil Renner Berthing <emil.renner.berthing@...onical.com>,
        Walker Chen <walker.chen@...rfivetech.com>
CC:     <alsa-devel@...a-project.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <linux-riscv@...ts.infradead.org>
Subject: [PATCH v4 3/3] riscv: dts: starfive: add the node and pins configuration for tdm

Add the tdm controller node and pins configuration of tdm for the
StarFive JH7110 SoC.

Signed-off-by: Walker Chen <walker.chen@...rfivetech.com>
---
 .../jh7110-starfive-visionfive-2.dtsi         | 40 +++++++++++++++++++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      | 21 ++++++++++
 2 files changed, 61 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 1155b97b593d..19b5954ee72d 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -214,6 +214,40 @@
 			slew-rate = <0>;
 		};
 	};
+
+	tdm0_pins: tdm0-pins {
+		tdm0-pins-tx {
+			pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			bias-pull-up;
+			drive-strength = <2>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		tdm0-pins-rx {
+			pinmux = <GPIOMUX(61, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_RXD)>;
+			input-enable;
+		};
+
+		tdm0-pins-sync {
+			pinmux = <GPIOMUX(63, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_SYNC)>;
+			input-enable;
+		};
+
+		tdm0-pins-pcmclk {
+			pinmux = <GPIOMUX(38, GPOUT_HIGH,
+					      GPOEN_DISABLE,
+					      GPI_SYS_TDM_CLK)>;
+			input-enable;
+		};
+	};
 };
 
 &uart0 {
@@ -221,3 +255,9 @@
 	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };
+
+&tdm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tdm0_pins>;
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 866313570a7e..cfda6fb0d91b 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -366,6 +366,27 @@
 			status = "disabled";
 		};
 
+		tdm: tdm@...90000 {
+			compatible = "starfive,jh7110-tdm";
+			reg = <0x0 0x10090000 0x0 0x1000>;
+			clocks = <&syscrg JH7110_SYSCLK_TDM_AHB>,
+				 <&syscrg JH7110_SYSCLK_TDM_APB>,
+				 <&syscrg JH7110_SYSCLK_TDM_INTERNAL>,
+				 <&syscrg JH7110_SYSCLK_TDM_TDM>,
+				 <&syscrg JH7110_SYSCLK_MCLK_INNER>,
+				 <&tdm_ext>;
+			clock-names = "tdm_ahb", "tdm_apb",
+				      "tdm_internal", "tdm",
+				      "mclk_inner", "tdm_ext";
+			resets = <&syscrg JH7110_SYSRST_TDM_AHB>,
+				 <&syscrg JH7110_SYSRST_TDM_APB>,
+				 <&syscrg JH7110_SYSRST_TDM_CORE>;
+			dmas = <&dma 20>, <&dma 21>;
+			dma-names = "rx","tx";
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
 		stgcrg: clock-controller@...30000 {
 			compatible = "starfive,jh7110-stgcrg";
 			reg = <0x0 0x10230000 0x0 0x10000>;
-- 
2.17.1