[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <7b3a37e8-0210-c539-5b5b-bf8e587707ea@linaro.org>
Date: Thu, 11 May 2023 11:58:20 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Aidan MacDonald <aidanmacdonald.0x0@...il.com>,
lgirdwood@...il.com, broonie@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org
Cc: perex@...ex.cz, tiwai@...e.com, alsa-devel@...a-project.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1 3/3] dt-bindings: ASoC: Add ESS ES9218P codec bindings
On 10/05/2023 13:23, Aidan MacDonald wrote:
> Device tree bindings for the ESS ES9218P codec, which uses an
> I2C control interface.
>
Thank you for your patch. There is something to discuss/improve.
Subject: reverse dt-bindings and ASoC.
Subject: drop second/last, redundant "bindings". The "dt-bindings"
prefix is already stating that these are bindings.
> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@...il.com>
> ---
> .../bindings/sound/ess,es9218p.yaml | 104 ++++++++++++++++++
> 1 file changed, 104 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/ess,es9218p.yaml
>
> diff --git a/Documentation/devicetree/bindings/sound/ess,es9218p.yaml b/Documentation/devicetree/bindings/sound/ess,es9218p.yaml
> new file mode 100644
> index 000000000000..d205b6a8bbb2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/ess,es9218p.yaml
> @@ -0,0 +1,104 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/ess,es9218p.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ESS ES9218P audio codec
> +
> +maintainers:
> + - Aidan MacDonald <aidanmacdonald.0x0@...il.com>
> +
allOf with ref to dai-common.
> +properties:
> + compatible:
> + const: ess,es9218p
> +
> + reg:
> + maxItems: 1
> +
> + "#sound-dai-cells":
> + const: 0
> +
> + avdd-supply:
> + description:
> + Definition of the regulator used for digital core power supply.
Drop "Definition of the regulator used for"
> +
> + vcca-supply:
> + description:
> + Definition of the regulator used for oscillator and DAC power supply.
> +
Ditto
> + avcc3v3-supply:
> + description:
> + Definition of the 3.3V regulator for amplifier, switch, and charge pumps.
Drop "Definition of"
> +
> + avcc1v8-supply:
> + description:
> + Definition of the 1.8V regulator for amplifier, switch, and charge pumps.
Ditto
> +
> + clocks:
> + items:
> + - description: clock for master clock (MCLK)
> +
> + clock-names:
> + items:
> + - const: mclk
Drop entire names, not really useful.
> +
> + reset-gpios:
> + maxItems: 1
> + description:
> + Pin used for codec hardware reset, corresponds to the RESETB pin.
> +
> + ess,max-clock-div:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Sets the maximum MCLK divider for generating the internal CLK.
> + CLK must be at least 20x the I2C bus speed or I2C transactions
> + will fail. The maximum divider should be chosen to ensure that
> + CLK will not fall below the limit.
> + enum:
> + - 1
> + - 2
> + - 4
> + - 8
> + default: 1
Why do you need to customize it per board?
> +
> + ess,oscillator-pad-bias:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: Sets the oscillator pad drive bias. 0 - full bias, 15 - disabled.
> + minimum: 0
> + maximum: 15
> + default: 0
> +
> +required:
> + - compatible
> + - reg
> + - "#sound-dai-cells"
> + - avdd-supply
> + - vcca-supply
> + - avcc3v3-supply
> + - avcc1v8-supply
> + - clocks
> + - clock-names
> + - reset-gpios
> +
> +additionalProperties: false
Instead: unevaluatedProperties: false
> +
> +examples:
Best regards,
Krzysztof
Powered by blists - more mailing lists