| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZF0MXKkK1tEN6QyV@corigine.com>
Date: Thu, 11 May 2023 17:40:12 +0200
From: Simon Horman <simon.horman@...igine.com>
To: Mikhail Golubev-Ciuchea <Mikhail.Golubev-Ciuchea@...nsynergy.com>
Cc: virtio-dev@...ts.oasis-open.org, linux-can@...r.kernel.org,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
virtualization@...ts.linux-foundation.org,
Wolfgang Grandegger <wg@...ndegger.com>,
Marc Kleine-Budde <mkl@...gutronix.de>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
"Michael S . Tsirkin" <mst@...hat.com>,
Jason Wang <jasowang@...hat.com>,
Damir Shaikhutdinov <Damir.Shaikhutdinov@...nsynergy.com>,
Harald Mommer <harald.mommer@...nsynergy.com>
Subject: Re: [RFC PATCH v3] can: virtio: Initial virtio CAN driver.
On Thu, May 11, 2023 at 05:14:44PM +0200, Mikhail Golubev-Ciuchea wrote:
> From: Harald Mommer <harald.mommer@...nsynergy.com>
>
> - CAN Control
>
> - "ip link set up can0" starts the virtual CAN controller,
> - "ip link set up can0" stops the virtual CAN controller
>
> - CAN RX
>
> Receive CAN frames. CAN frames can be standard or extended, classic or
> CAN FD. Classic CAN RTR frames are supported.
>
> - CAN TX
>
> Send CAN frames. CAN frames can be standard or extended, classic or
> CAN FD. Classic CAN RTR frames are supported.
>
> - CAN BusOff indication
>
> CAN BusOff is handled by a bit in the configuration space.
>
> Signed-off-by: Harald Mommer <Harald.Mommer@...nsynergy.com>
> Signed-off-by: Mikhail Golubev-Ciuchea <Mikhail.Golubev-Ciuchea@...nsynergy.com>
> Co-developed-by: Marc Kleine-Budde <mkl@...gutronix.de>
> Signed-off-by: Marc Kleine-Budde <mkl@...gutronix.de>
> Cc: Damir Shaikhutdinov <Damir.Shaikhutdinov@...nsynergy.com>
Hi Mikhail,
thanks for your patch.
Some minor feedback from my side.
...
> diff --git a/drivers/net/can/virtio_can.c b/drivers/net/can/virtio_can.c
...
> +/* Send a control message with message type either
> + *
> + * - VIRTIO_CAN_SET_CTRL_MODE_START or
> + * - VIRTIO_CAN_SET_CTRL_MODE_STOP.
> + *
> + * Unlike AUTOSAR CAN Driver Can_SetControllerMode() there is no requirement
> + * for this Linux driver to have an asynchronous implementation of the mode
> + * setting function so in order to keep things simple the function is
> + * implemented as synchronous function. Design pattern is
> + * virtio_console.c/__send_control_msg() & virtio_net.c/virtnet_send_command().
> + */
> +static u8 virtio_can_send_ctrl_msg(struct net_device *ndev, u16 msg_type)
> +{
> + struct virtio_can_priv *priv = netdev_priv(ndev);
> + struct device *dev = &priv->vdev->dev;
> + struct virtqueue *vq = priv->vqs[VIRTIO_CAN_QUEUE_CONTROL];
> + struct scatterlist sg_out[1];
> + struct scatterlist sg_in[1];
> + struct scatterlist *sgs[2];
> + int err;
> + unsigned int len;
nit: For networking code please arrange local variables in reverse xmas
tree order - longest line to shortest.
You can check this using: https://github.com/ecree-solarflare/xmastree
In this case I think it would be:
struct virtio_can_priv *priv = netdev_priv(ndev);
struct device *dev = &priv->vdev->dev;
struct scatterlist sg_out[1];
struct scatterlist sg_in[1];
struct scatterlist *sgs[2];
struct virtqueue *vq;
unsigned int len;
int err;
vq = priv->vqs[VIRTIO_CAN_QUEUE_CONTROL];
...
> +static netdev_tx_t virtio_can_start_xmit(struct sk_buff *skb,
> + struct net_device *dev)
> +{
> + struct virtio_can_priv *priv = netdev_priv(dev);
> + struct canfd_frame *cf = (struct canfd_frame *)skb->data;
> + struct virtio_can_tx *can_tx_msg;
> + struct virtqueue *vq = priv->vqs[VIRTIO_CAN_QUEUE_TX];
> + struct scatterlist sg_out[1];
> + struct scatterlist sg_in[1];
> + struct scatterlist *sgs[2];
> + unsigned long flags;
> + u32 can_flags;
> + int err;
> + int putidx;
> + netdev_tx_t xmit_ret = NETDEV_TX_OK;
> + const unsigned int hdr_size = offsetof(struct virtio_can_tx_out, sdu);
> +
> + if (can_dev_dropped_skb(dev, skb))
> + goto kick; /* No way to return NET_XMIT_DROP here */
> +
> + /* No local check for CAN_RTR_FLAG or FD frame against negotiated
> + * features. The device will reject those anyway if not supported.
> + */
> +
> + can_tx_msg = kzalloc(sizeof(*can_tx_msg), GFP_ATOMIC);
> + if (!can_tx_msg)
> + goto kick; /* No way to return NET_XMIT_DROP here */
> +
> + can_tx_msg->tx_out.msg_type = cpu_to_le16(VIRTIO_CAN_TX);
> + can_flags = 0;
> +
> + if (cf->can_id & CAN_EFF_FLAG) {
> + can_flags |= VIRTIO_CAN_FLAGS_EXTENDED;
> + can_tx_msg->tx_out.can_id = cpu_to_le32(cf->can_id & CAN_EFF_MASK);
> + } else {
> + can_tx_msg->tx_out.can_id = cpu_to_le32(cf->can_id & CAN_SFF_MASK);
> + }
> + if (cf->can_id & CAN_RTR_FLAG)
> + can_flags |= VIRTIO_CAN_FLAGS_RTR;
> + else
> + memcpy(can_tx_msg->tx_out.sdu, cf->data, cf->len);
> + if (can_is_canfd_skb(skb))
> + can_flags |= VIRTIO_CAN_FLAGS_FD;
> +
> + can_tx_msg->tx_out.flags = cpu_to_le32(can_flags);
> + can_tx_msg->tx_out.length = cpu_to_le16(cf->len);
> +
> + /* Prepare sending of virtio message */
> + sg_init_one(&sg_out[0], &can_tx_msg->tx_out, hdr_size + cf->len);
> + sg_init_one(&sg_in[0], &can_tx_msg->tx_in, sizeof(can_tx_msg->tx_in));
> + sgs[0] = sg_out;
> + sgs[1] = sg_in;
> +
> + putidx = virtio_can_alloc_tx_idx(priv);
> +
> + if (unlikely(putidx < 0)) {
> + netif_stop_queue(dev);
> + kfree(can_tx_msg);
> + netdev_warn(dev, "TX: Stop queue, no putidx available\n");
If I understand things correctly, this code is on the datapath.
So perhaps these should be rate limited, or only logged once.
Likewise elsewhere in this function.
> + xmit_ret = NETDEV_TX_BUSY;
> + goto kick;
> + }
> +
> + can_tx_msg->putidx = (unsigned int)putidx;
> +
> + /* Protect list operation */
> + spin_lock_irqsave(&priv->tx_lock, flags);
> + list_add_tail(&can_tx_msg->list, &priv->tx_list);
> + spin_unlock_irqrestore(&priv->tx_lock, flags);
> +
> + /* Push loopback echo. Will be looped back on TX interrupt/TX NAPI */
> + can_put_echo_skb(skb, dev, can_tx_msg->putidx, 0);
> +
> + /* Protect queue and list operations */
> + spin_lock_irqsave(&priv->tx_lock, flags);
> + err = virtqueue_add_sgs(vq, sgs, 1u, 1u, can_tx_msg, GFP_ATOMIC);
> + if (err != 0) { /* unlikely when vq->num_free was considered */
> + list_del(&can_tx_msg->list);
> + can_free_echo_skb(dev, can_tx_msg->putidx, NULL);
> + virtio_can_free_tx_idx(priv, can_tx_msg->putidx);
> + spin_unlock_irqrestore(&priv->tx_lock, flags);
> + netif_stop_queue(dev);
> + kfree(can_tx_msg);
> + if (err == -ENOSPC)
> + netdev_dbg(dev, "TX: Stop queue, no space left\n");
> + else
> + netdev_warn(dev, "TX: Stop queue, reason = %d\n", err);
> + xmit_ret = NETDEV_TX_BUSY;
> + goto kick;
> + }
> +
> + /* Normal queue stop when no transmission slots are left */
> + if (atomic_read(&priv->tx_inflight) >= priv->can.echo_skb_max ||
> + vq->num_free == 0 || (vq->num_free < 2 &&
> + !virtio_has_feature(vq->vdev, VIRTIO_RING_F_INDIRECT_DESC))) {
> + netif_stop_queue(dev);
> + netdev_dbg(dev, "TX: Normal stop queue\n");
> + }
> +
> + spin_unlock_irqrestore(&priv->tx_lock, flags);
> +
> +kick:
> + if (netif_queue_stopped(dev) || !netdev_xmit_more()) {
> + if (!virtqueue_kick(vq))
> + netdev_err(dev, "%s(): Kick failed\n", __func__);
> + }
> +
> + return xmit_ret;
> +}
...
Powered by blists - more mailing lists