| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAMj1kXHY-uWWgWjv-7wLkKoh9pvgCbEkxHiCBbJa1wt53g5wYg@mail.gmail.com>
Date: Fri, 12 May 2023 09:39:30 +0200
From: Ard Biesheuvel <ardb@...nel.org>
To: "Kirill A. Shutemov" <kirill@...temov.name>
Cc: Borislav Petkov <bp@...en8.de>,
"Kirill A. Shutemov" <kirill.shutemov@...ux.intel.com>,
Andy Lutomirski <luto@...nel.org>,
Dave Hansen <dave.hansen@...el.com>,
Sean Christopherson <seanjc@...gle.com>,
Andrew Morton <akpm@...ux-foundation.org>,
Joerg Roedel <jroedel@...e.de>,
Andi Kleen <ak@...ux.intel.com>,
Kuppuswamy Sathyanarayanan
<sathyanarayanan.kuppuswamy@...ux.intel.com>,
David Rientjes <rientjes@...gle.com>,
Vlastimil Babka <vbabka@...e.cz>,
Tom Lendacky <thomas.lendacky@....com>,
Thomas Gleixner <tglx@...utronix.de>,
Peter Zijlstra <peterz@...radead.org>,
Paolo Bonzini <pbonzini@...hat.com>,
Ingo Molnar <mingo@...hat.com>,
Dario Faggioli <dfaggioli@...e.com>,
Mike Rapoport <rppt@...nel.org>,
David Hildenbrand <david@...hat.com>,
Mel Gorman <mgorman@...hsingularity.net>,
marcelo.cerri@...onical.com, tim.gardner@...onical.com,
khalid.elmously@...onical.com, philip.cox@...onical.com,
aarcange@...hat.com, peterx@...hat.com, x86@...nel.org,
linux-mm@...ck.org, linux-coco@...ts.linux.dev,
linux-efi@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCHv10 04/11] efi/x86: Implement support for unaccepted memory
On Fri, 12 May 2023 at 03:59, Kirill A. Shutemov <kirill@...temov.name> wrote:
>
> On Tue, May 09, 2023 at 08:47:38AM +0200, Ard Biesheuvel wrote:
> > On Tue, 9 May 2023 at 02:56, Kirill A. Shutemov <kirill@...temov.name> wrote:
> > >
> > > On Tue, May 09, 2023 at 12:11:41AM +0200, Ard Biesheuvel wrote:
> > > > > @@ -1324,13 +1325,15 @@ void __init e820__memblock_setup(void)
> > > > > * e820_table is not finalized and e820__end_of_ram_pfn() cannot be
> > > > > * used to get correct RAM size.
> > > > > */
> > > > > - if (boot_params.unaccepted_memory) {
> > > > > + if (efi.unaccepted != EFI_INVALID_TABLE_ADDR) {
> > > > > + struct efi_unaccepted_memory *unaccepted;
> > > > > unsigned long size;
> > > > >
> > > > > - /* One bit per 2MB */
> > > > > - size = DIV_ROUND_UP(e820__end_of_ram_pfn() * PAGE_SIZE,
> > > > > - PMD_SIZE * BITS_PER_BYTE);
> > > > > - memblock_reserve(boot_params.unaccepted_memory, size);
> > > > > + unaccepted = __va(efi.unaccepted);
> > > > > +
> > > > > + size = sizeof(struct efi_unaccepted_memory);
> > > > > + size += unaccepted->size;
> > > > > + memblock_reserve(efi.unaccepted, size);
> > > > > }
> > > > >
> > > >
> > > > This could be moved to generic code (but we'll need to use early_memremap())
> > >
> > > I don't understand why early_memremap() is needed. EFI_LOADER_DATA already
> > > mapped into direct mapping. We only need to reserve the memory so it
> > > could not be reallocated for other things. Hm?
> > >
> >
> > *If* we move this to generic code, we have to ensure that we don't
> > rely on x86 specific semantics. When parsing the EFI configuration
> > tables, other architectures don't have a complete direct map yet, as
> > they receive the memory description from EFI not from a translated
> > E820 map.
> >
> > Note that this is only for getting the size of the reservation. Later
> > on, when we actually consume the contents of the bitmap, generic or
> > non-x86 code will need to use the ordinary memremap() API to map this
> > memory, and this amounts to a __va() call when the memory is already
> > mapped. But I am not suggesting changing that part for this series.
> > And even the hunk above can remain as you suggest - we can revisit it
> > once other architectures gain support for this.
> >
> > The main thing I would like to avoid at this point in time is to add
> > new fields to struct bootparams that loaders such as GRUB may start to
> > populate as well - I don't think there is a very strong case for
> > pseudo-EFI boot [where GRUB calls ExitBootServices()] on confidential
> > VMs (as it prevents the EFI stub and the kernel from accessing the
> > measurement and attestation APIs), but let's not create more struct
> > bootparams based API if we can avoid it.
>
> Below is updated version of the fixup. I believed I addressed all your
> feedback.
>
> I moved most of unaccepted memory code into generic EFI and EFI stub. I
> hope it looks fine.
>
Yes this looks excellent. I left some comments below, primarily about
the use of PMD_SIZE and the version field, but other than that, this
looks ready to go.
> early_memremap() for reservation works fine, but when I tried to use
> memremap() as you suggested to get the mapping of the table instead of
> __va() it failed. I didn't found the root cause. I guess I tried to use
> too early for memremap() to be functional. I made arch provide
> arch-specific way to get the mapping, which is implemented as __va() on
> x86.
>
Fair enough - we'll cross that bridge when we have to.
> While I move code from decompressor to the EFI stub, I removed few headers
> as, it *seems*, EFI stub has different policy about re-using headers from
> the main kernel image.
>
> Borislav, is it okay with you or EFI stub also has to carry own copy of
> the headers?
>
I'd prefer to avoid that - I'm not familiar with the motivation behind
this, but I don't remember any issues with the EFI stub that would
justify this.
> If everything is fine, I will fold the fixup properly and prepare v11 of
> the patchset.
>
That works for me. I'll coordinate with Boris on how to merge this.
> Documentation/arch/x86/zero-page.rst | 1 -
> arch/x86/boot/bitops.h | 40 ----
> arch/x86/boot/compressed/Makefile | 2 +-
> arch/x86/boot/compressed/bitmap.c | 43 -----
> arch/x86/boot/compressed/bitmap.h | 49 -----
> arch/x86/boot/compressed/bits.h | 36 ----
> arch/x86/boot/compressed/find.c | 54 ------
> arch/x86/boot/compressed/find.h | 79 --------
> arch/x86/boot/compressed/math.h | 37 ----
> arch/x86/boot/compressed/mem.c | 81 +--------
> arch/x86/boot/compressed/minmax.h | 61 -------
> arch/x86/boot/compressed/misc.c | 2 +-
> arch/x86/include/asm/page.h | 2 -
> arch/x86/include/asm/unaccepted_memory.h | 24 ++-
> arch/x86/include/uapi/asm/bootparam.h | 2 +-
> arch/x86/kernel/e820.c | 17 --
> arch/x86/mm/Makefile | 2 -
> arch/x86/mm/unaccepted_memory.c | 101 -----------
> drivers/firmware/efi/Makefile | 1 +
> drivers/firmware/efi/efi.c | 25 +++
> drivers/firmware/efi/libstub/Makefile | 2 +
> drivers/firmware/efi/libstub/efistub.h | 6 +
> drivers/firmware/efi/libstub/find.c | 43 +++++
> drivers/firmware/efi/libstub/unaccepted_memory.c | 221 +++++++++++++++++++++++
> drivers/firmware/efi/libstub/x86-stub.c | 62 +------
> drivers/firmware/efi/unaccepted_memory.c | 138 ++++++++++++++
> include/linux/efi.h | 12 ++
> mm/internal.h | 9 +-
> 28 files changed, 480 insertions(+), 672 deletions(-)
>
...
> diff --git a/drivers/firmware/efi/Makefile b/drivers/firmware/efi/Makefile
> index b51f2a4c821e..e489fefd23da 100644
> --- a/drivers/firmware/efi/Makefile
> +++ b/drivers/firmware/efi/Makefile
> @@ -41,3 +41,4 @@ obj-$(CONFIG_EFI_CAPSULE_LOADER) += capsule-loader.o
> obj-$(CONFIG_EFI_EARLYCON) += earlycon.o
> obj-$(CONFIG_UEFI_CPER_ARM) += cper-arm.o
> obj-$(CONFIG_UEFI_CPER_X86) += cper-x86.o
> +obj-$(CONFIG_UNACCEPTED_MEMORY) += unaccepted_memory.o
> diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
> index 7dce06e419c5..bddb5aeb0d12 100644
> --- a/drivers/firmware/efi/efi.c
> +++ b/drivers/firmware/efi/efi.c
> @@ -50,6 +50,9 @@ struct efi __read_mostly efi = {
> #ifdef CONFIG_EFI_COCO_SECRET
> .coco_secret = EFI_INVALID_TABLE_ADDR,
> #endif
> +#ifdef CONFIG_UNACCEPTED_MEMORY
> + .unaccepted = EFI_INVALID_TABLE_ADDR,
> +#endif
> };
> EXPORT_SYMBOL(efi);
>
> @@ -605,6 +608,9 @@ static const efi_config_table_type_t common_tables[] __initconst = {
> #ifdef CONFIG_EFI_COCO_SECRET
> {LINUX_EFI_COCO_SECRET_AREA_GUID, &efi.coco_secret, "CocoSecret" },
> #endif
> +#ifdef CONFIG_UNACCEPTED_MEMORY
> + {LINUX_EFI_UNACCEPTED_MEM_TABLE_GUID, &efi.unaccepted, "Unaccepted" },
> +#endif
> #ifdef CONFIG_EFI_GENERIC_STUB
> {LINUX_EFI_SCREEN_INFO_TABLE_GUID, &screen_info_table },
> #endif
> @@ -759,6 +765,25 @@ int __init efi_config_parse_tables(const efi_config_table_t *config_tables,
> }
> }
>
> + if (IS_ENABLED(CONFIG_UNACCEPTED_MEMORY) &&
> + efi.unaccepted != EFI_INVALID_TABLE_ADDR) {
> + struct efi_unaccepted_memory *unaccepted;
> +
> + unaccepted = early_memremap(efi.unaccepted, sizeof(*unaccepted));
> + if (unaccepted) {
> + unsigned long size;
> +
> + if (unaccepted->version == 0) {
> + size = sizeof(*unaccepted) + unaccepted->size;
> + memblock_reserve(efi.unaccepted, size);
> + } else {
> + efi.unaccepted = EFI_INVALID_TABLE_ADDR;
> + }
> +
> + early_memunmap(unaccepted, sizeof(*unaccepted));
> + }
> + }
> +
> return 0;
> }
>
> diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
> index 3abb2b357482..a09edfbd7cfc 100644
> --- a/drivers/firmware/efi/libstub/Makefile
> +++ b/drivers/firmware/efi/libstub/Makefile
> @@ -96,6 +96,8 @@ CFLAGS_arm32-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
> zboot-obj-$(CONFIG_RISCV) := lib-clz_ctz.o lib-ashldi3.o
> lib-$(CONFIG_EFI_ZBOOT) += zboot.o $(zboot-obj-y)
>
> +lib-$(CONFIG_UNACCEPTED_MEMORY) += unaccepted_memory.o find.o
> +
> extra-y := $(lib-y)
> lib-y := $(patsubst %.o,%.stub.o,$(lib-y))
>
> diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
> index 67d5a20802e0..8659a01664b8 100644
> --- a/drivers/firmware/efi/libstub/efistub.h
> +++ b/drivers/firmware/efi/libstub/efistub.h
> @@ -1133,4 +1133,10 @@ const u8 *__efi_get_smbios_string(const struct efi_smbios_record *record,
> void efi_remap_image(unsigned long image_base, unsigned alloc_size,
> unsigned long code_size);
>
> +efi_status_t allocate_unaccepted_bitmap(__u32 nr_desc,
> + struct efi_boot_memmap *map);
> +void process_unaccepted_memory(u64 start, u64 end);
> +void accept_memory(phys_addr_t start, phys_addr_t end);
> +void arch_accept_memory(phys_addr_t start, phys_addr_t end);
> +
> #endif
> diff --git a/drivers/firmware/efi/libstub/find.c b/drivers/firmware/efi/libstub/find.c
> new file mode 100644
> index 000000000000..4e7740d28987
> --- /dev/null
> +++ b/drivers/firmware/efi/libstub/find.c
> @@ -0,0 +1,43 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +#include <linux/bitmap.h>
> +#include <linux/math.h>
> +#include <linux/minmax.h>
> +
> +/*
> + * Common helper for find_next_bit() function family
> + * @FETCH: The expression that fetches and pre-processes each word of bitmap(s)
> + * @MUNGE: The expression that post-processes a word containing found bit (may be empty)
> + * @size: The bitmap size in bits
> + * @start: The bitnumber to start searching at
> + */
> +#define FIND_NEXT_BIT(FETCH, MUNGE, size, start) \
> +({ \
> + unsigned long mask, idx, tmp, sz = (size), __start = (start); \
> + \
> + if (unlikely(__start >= sz)) \
> + goto out; \
> + \
> + mask = MUNGE(BITMAP_FIRST_WORD_MASK(__start)); \
> + idx = __start / BITS_PER_LONG; \
> + \
> + for (tmp = (FETCH) & mask; !tmp; tmp = (FETCH)) { \
> + if ((idx + 1) * BITS_PER_LONG >= sz) \
> + goto out; \
> + idx++; \
> + } \
> + \
> + sz = min(idx * BITS_PER_LONG + __ffs(MUNGE(tmp)), sz); \
> +out: \
> + sz; \
> +})
> +
> +unsigned long _find_next_bit(const unsigned long *addr, unsigned long nbits, unsigned long start)
> +{
> + return FIND_NEXT_BIT(addr[idx], /* nop */, nbits, start);
> +}
> +
> +unsigned long _find_next_zero_bit(const unsigned long *addr, unsigned long nbits,
> + unsigned long start)
> +{
> + return FIND_NEXT_BIT(~addr[idx], /* nop */, nbits, start);
> +}
> diff --git a/drivers/firmware/efi/libstub/unaccepted_memory.c b/drivers/firmware/efi/libstub/unaccepted_memory.c
> new file mode 100644
> index 000000000000..6c19d8fa563e
> --- /dev/null
> +++ b/drivers/firmware/efi/libstub/unaccepted_memory.c
> @@ -0,0 +1,221 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/efi.h>
> +#include <asm/efi.h>
> +#include "efistub.h"
> +
> +static struct efi_unaccepted_memory *unaccepted_table;
> +
> +efi_status_t allocate_unaccepted_bitmap(__u32 nr_desc,
> + struct efi_boot_memmap *map)
> +{
> + efi_guid_t unaccepted_table_guid = LINUX_EFI_UNACCEPTED_MEM_TABLE_GUID;
> + u64 unaccepted_start = ULLONG_MAX, unaccepted_end = 0, bitmap_size;
> + efi_status_t status;
> + int i;
> +
> + /* Check if the table is already installed */
> + unaccepted_table = get_efi_config_table(unaccepted_table_guid);
> + if (unaccepted_table) {
> + if (unaccepted_table->version != 0) {
> + efi_err("Unknown version of unaccepted memory tatble\n");
Typo ^^^
Also, can we start with version 1 rather than 0? That way, we can spot
the difference between a valid table and memory that has been cleared
inadvertently.
> + return EFI_UNSUPPORTED;
> + }
> + return EFI_SUCCESS;
> + }
> +
> + /* Check if there's any unaccepted memory and find the max address */
> + for (i = 0; i < nr_desc; i++) {
> + efi_memory_desc_t *d;
> + unsigned long m = (unsigned long)map->map;
> +
> + d = efi_early_memdesc_ptr(m, map->desc_size, i);
> + if (d->type != EFI_UNACCEPTED_MEMORY)
> + continue;
> +
> + unaccepted_start = min(unaccepted_start, d->phys_addr);
> + unaccepted_end = max(unaccepted_end,
> + d->phys_addr + d->num_pages * PAGE_SIZE);
> + }
> +
> + if (unaccepted_start == ULLONG_MAX)
> + return EFI_SUCCESS;
> +
> + unaccepted_start = round_down(unaccepted_start, PMD_SIZE);
> + unaccepted_end = round_up(unaccepted_end, PMD_SIZE);
> +
Please replace PMD_SIZE with something along the lines of
EFI_UNACCEPTED_UNIT_SIZE and #define it to PMD_SIZE in
arch/x86/include/asm/efi.h.
The comment below about the size of the bitmap vs the size of the
address space should probably move there as well.
> + /*
> + * If unaccepted memory is present, allocate a bitmap to track what
> + * memory has to be accepted before access.
> + *
> + * One bit in the bitmap represents 2MiB in the address space:
> + * A 4k bitmap can track 64GiB of physical address space.
> + *
> + * In the worst case scenario -- a huge hole in the middle of the
> + * address space -- It needs 256MiB to handle 4PiB of the address
> + * space.
> + *
> + * The bitmap will be populated in setup_e820() according to the memory
> + * map after efi_exit_boot_services().
> + */
> + bitmap_size = DIV_ROUND_UP(unaccepted_end - unaccepted_start,
> + PMD_SIZE * BITS_PER_BYTE);
PMD_SIZE ^^^
> +
> + status = efi_bs_call(allocate_pool, EFI_LOADER_DATA,
> + sizeof(*unaccepted_table) + bitmap_size,
> + (void **)&unaccepted_table);
> + if (status != EFI_SUCCESS) {
> + efi_err("Failed to allocate unaccepted memory config table\n");
> + return status;
> + }
> +
> + unaccepted_table->version = 0;
> + unaccepted_table->unit_size = PMD_SIZE;
And here
> + unaccepted_table->phys_base = unaccepted_start;
> + unaccepted_table->size = bitmap_size;
> + memset(unaccepted_table->bitmap, 0, bitmap_size);
> +
> + status = efi_bs_call(install_configuration_table,
> + &unaccepted_table_guid, unaccepted_table);
> + if (status != EFI_SUCCESS) {
> + efi_bs_call(free_pool, unaccepted_table);
> + efi_err("Failed to install unaccepted memory config table!\n");
> + }
> +
> + return status;
> +}
> +
> +/*
> + * The accepted memory bitmap only works at PMD_SIZE granularity. Take
> + * unaligned start/end addresses and either:
> + * 1. Accepts the memory immediately and in its entirety
> + * 2. Accepts unaligned parts, and marks *some* aligned part unaccepted
> + *
> + * The function will never reach the bitmap_set() with zero bits to set.
> + */
> +void process_unaccepted_memory(u64 start, u64 end)
> +{
> + u64 unit_size = unaccepted_table->unit_size;
> + u64 unit_mask = unaccepted_table->unit_size - 1;
> + u64 bitmap_size = unaccepted_table->size;
> +
> + /*
> + * Ensure that at least one bit will be set in the bitmap by
> + * immediately accepting all regions under 2*unit_size. This is
> + * imprecise and may immediately accept some areas that could
> + * have been represented in the bitmap. But, results in simpler
> + * code below
> + *
> + * Consider case like this (assuming unit_size == 2MB):
> + *
> + * | 4k | 2044k | 2048k |
> + * ^ 0x0 ^ 2MB ^ 4MB
> + *
> + * Only the first 4k has been accepted. The 0MB->2MB region can not be
> + * represented in the bitmap. The 2MB->4MB region can be represented in
> + * the bitmap. But, the 0MB->4MB region is <2*unit_size and will be
> + * immediately accepted in its entirety.
> + */
> + if (end - start < 2 * unit_size) {
> + arch_accept_memory(start, end);
> + return;
> + }
> +
> + /*
> + * No matter how the start and end are aligned, at least one unaccepted
> + * unit_size area will remain to be marked in the bitmap.
> + */
> +
> + /* Immediately accept a <unit_size piece at the start: */
> + if (start & unit_mask) {
> + arch_accept_memory(start, round_up(start, unit_size));
> + start = round_up(start, unit_size);
> + }
> +
> + /* Immediately accept a <unit_size piece at the end: */
> + if (end & unit_mask) {
> + arch_accept_memory(round_down(end, unit_size), end);
> + end = round_down(end, unit_size);
> + }
> +
> + /*
> + * Accept part of the range that before phys_base and cannot be recorded
> + * into the bitmap.
> + */
> + if (start < unaccepted_table->phys_base) {
> + arch_accept_memory(start,
> + min(unaccepted_table->phys_base, end));
> + start = unaccepted_table->phys_base;
> + }
> +
> + /* Nothing to record */
> + if (end < unaccepted_table->phys_base)
> + return;
> +
> + /* Translate to offsets from the beginning of the bitmap */
> + start -= unaccepted_table->phys_base;
> + end -= unaccepted_table->phys_base;
> +
> + /* Accept memory that doesn't fit into bitmap */
> + if (end > bitmap_size * unit_size * BITS_PER_BYTE) {
> + unsigned long phys_start, phys_end;
> +
> + phys_start = bitmap_size * unit_size * BITS_PER_BYTE +
> + unaccepted_table->phys_base;
> + phys_end = end + unaccepted_table->phys_base;
> +
> + arch_accept_memory(phys_start, phys_end);
> + end = bitmap_size * unit_size * BITS_PER_BYTE;
> + }
> +
> + /*
> + * 'start' and 'end' are now both unit_size-aligned.
> + * Record the range as being unaccepted:
> + */
> + bitmap_set(unaccepted_table->bitmap,
> + start / unit_size, (end - start) / unit_size);
> +}
> +
> +void accept_memory(phys_addr_t start, phys_addr_t end)
> +{
> + unsigned long range_start, range_end;
> + unsigned long bitmap_size;
> + u64 unit_size;
> +
> + if (!unaccepted_table)
> + return;
> +
> + unit_size = unaccepted_table->unit_size;
> +
> + /*
> + * Only care for the part of the range that is represented
> + * in the bitmap.
> + */
> + if (start < unaccepted_table->phys_base)
> + start = unaccepted_table->phys_base;
> + if (end < unaccepted_table->phys_base)
> + return;
> +
> + /* Translate to offsets from the beginning of the bitmap */
> + start -= unaccepted_table->phys_base;
> + end -= unaccepted_table->phys_base;
> +
> + /* Make sure not to overrun the bitmap */
> + if (end > unaccepted_table->size * unit_size * BITS_PER_BYTE)
> + end = unaccepted_table->size * unit_size * BITS_PER_BYTE;
> +
Should we warn here?
> + range_start = start / unit_size;
> + bitmap_size = DIV_ROUND_UP(end, unit_size);
> +
> + for_each_set_bitrange_from(range_start, range_end,
> + unaccepted_table->bitmap, bitmap_size) {
> + unsigned long phys_start, phys_end;
> +
> + phys_start = range_start * unit_size + unaccepted_table->phys_base;
> + phys_end = range_end * unit_size + unaccepted_table->phys_base;
> +
> + arch_accept_memory(phys_start, phys_end);
> + bitmap_clear(unaccepted_table->bitmap,
> + range_start, range_end - range_start);
> + }
> +}
> diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
> index 1afe7b5b02e1..16ea5e76907f 100644
> --- a/drivers/firmware/efi/libstub/x86-stub.c
> +++ b/drivers/firmware/efi/libstub/x86-stub.c
> @@ -621,7 +621,7 @@ setup_e820(struct boot_params *params, struct setup_data *e820ext, u32 e820ext_s
> continue;
> }
> e820_type = E820_TYPE_RAM;
> - process_unaccepted_memory(params, d->phys_addr,
> + process_unaccepted_memory(d->phys_addr,
> d->phys_addr + PAGE_SIZE * d->num_pages);
> break;
> default:
> @@ -688,64 +688,6 @@ static efi_status_t alloc_e820ext(u32 nr_desc, struct setup_data **e820ext,
> return status;
> }
>
> -static efi_status_t allocate_unaccepted_bitmap(struct boot_params *params,
> - __u32 nr_desc,
> - struct efi_boot_memmap *map)
> -{
> - unsigned long *mem = NULL;
> - u64 size, max_addr = 0;
> - efi_status_t status;
> - bool found = false;
> - int i;
> -
> - /* Check if there's any unaccepted memory and find the max address */
> - for (i = 0; i < nr_desc; i++) {
> - efi_memory_desc_t *d;
> - unsigned long m = (unsigned long)map->map;
> -
> - d = efi_early_memdesc_ptr(m, map->desc_size, i);
> - if (d->type == EFI_UNACCEPTED_MEMORY)
> - found = true;
> - if (d->phys_addr + d->num_pages * PAGE_SIZE > max_addr)
> - max_addr = d->phys_addr + d->num_pages * PAGE_SIZE;
> - }
> -
> - if (!found) {
> - params->unaccepted_memory = 0;
> - return EFI_SUCCESS;
> - }
> -
> - /*
> - * range_contains_unaccepted_memory() may need to check one 2M chunk
> - * beyond the end of RAM to deal with load_unaligned_zeropad(). Make
> - * sure that the bitmap is large enough handle it.
> - */
> - max_addr += PMD_SIZE;
> -
> - /*
> - * If unaccepted memory is present, allocate a bitmap to track what
> - * memory has to be accepted before access.
> - *
> - * One bit in the bitmap represents 2MiB in the address space:
> - * A 4k bitmap can track 64GiB of physical address space.
> - *
> - * In the worst case scenario -- a huge hole in the middle of the
> - * address space -- It needs 256MiB to handle 4PiB of the address
> - * space.
> - *
> - * The bitmap will be populated in setup_e820() according to the memory
> - * map after efi_exit_boot_services().
> - */
> - size = DIV_ROUND_UP(max_addr, PMD_SIZE * BITS_PER_BYTE);
> - status = efi_allocate_pages(size, (unsigned long *)&mem, ULONG_MAX);
> - if (status == EFI_SUCCESS) {
> - memset(mem, 0, size);
> - params->unaccepted_memory = (unsigned long)mem;
> - }
> -
> - return status;
> -}
> -
> static efi_status_t allocate_e820(struct boot_params *params,
> struct setup_data **e820ext,
> u32 *e820ext_size)
> @@ -767,7 +709,7 @@ static efi_status_t allocate_e820(struct boot_params *params,
> }
>
> if (IS_ENABLED(CONFIG_UNACCEPTED_MEMORY) && status == EFI_SUCCESS)
> - status = allocate_unaccepted_bitmap(params, nr_desc, map);
> + status = allocate_unaccepted_bitmap(nr_desc, map);
>
> efi_bs_call(free_pool, map);
> return status;
> diff --git a/drivers/firmware/efi/unaccepted_memory.c b/drivers/firmware/efi/unaccepted_memory.c
> new file mode 100644
> index 000000000000..3d1ca60916dd
> --- /dev/null
> +++ b/drivers/firmware/efi/unaccepted_memory.c
> @@ -0,0 +1,138 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/efi.h>
> +#include <linux/memblock.h>
> +#include <linux/spinlock.h>
> +#include <asm/unaccepted_memory.h>
> +
> +/* Protects unaccepted memory bitmap */
> +static DEFINE_SPINLOCK(unaccepted_memory_lock);
> +
> +void accept_memory(phys_addr_t start, phys_addr_t end)
> +{
> + struct efi_unaccepted_memory *unaccepted;
> + unsigned long range_start, range_end;
> + unsigned long flags;
> + u64 unit_size;
> +
> + if (efi.unaccepted == EFI_INVALID_TABLE_ADDR)
> + return;
> +
> + unaccepted = efi_get_unaccepted_table();
> + if (!unaccepted)
> + return;
> +
> + unit_size = unaccepted->unit_size;
> +
> + /*
> + * Only care for the part of the range that is represented
> + * in the bitmap.
> + */
> + if (start < unaccepted->phys_base)
> + start = unaccepted->phys_base;
> + if (end < unaccepted->phys_base)
> + return;
> +
> + /* Translate to offsets from the beginning of the bitmap */
> + start -= unaccepted->phys_base;
> + end -= unaccepted->phys_base;
> +
> + /*
> + * load_unaligned_zeropad() can lead to unwanted loads across page
> + * boundaries. The unwanted loads are typically harmless. But, they
> + * might be made to totally unrelated or even unmapped memory.
> + * load_unaligned_zeropad() relies on exception fixup (#PF, #GP and now
> + * #VE) to recover from these unwanted loads.
> + *
> + * But, this approach does not work for unaccepted memory. For TDX, a
> + * load from unaccepted memory will not lead to a recoverable exception
> + * within the guest. The guest will exit to the VMM where the only
> + * recourse is to terminate the guest.
> + *
> + * There are two parts to fix this issue and comprehensively avoid
> + * access to unaccepted memory. Together these ensure that an extra
> + * "guard" page is accepted in addition to the memory that needs to be
> + * used:
> + *
> + * 1. Implicitly extend the range_contains_unaccepted_memory(start, end)
> + * checks up to end+unit_size if 'end' is aligned on a unit_size
> + * boundary.
> + *
> + * 2. Implicitly extend accept_memory(start, end) to end+unit_size if
> + * 'end' is aligned on a unit_size boundary. (immediately following
> + * this comment)
> + */
> + if (!(end % unit_size))
> + end += unit_size;
> +
> + /* Make sure not to overrun the bitmap */
> + if (end > unaccepted->size * unit_size * BITS_PER_BYTE)
> + end = unaccepted->size * unit_size * BITS_PER_BYTE;
> +
> + range_start = start / unit_size;
> +
> + spin_lock_irqsave(&unaccepted_memory_lock, flags);
> + for_each_set_bitrange_from(range_start, range_end, unaccepted->bitmap,
> + DIV_ROUND_UP(end, unit_size)) {
> + unsigned long phys_start, phys_end;
> + unsigned long len = range_end - range_start;
> +
> + phys_start = range_start * unit_size + unaccepted->phys_base;
> + phys_end = range_end * unit_size + unaccepted->phys_base;
> +
> + arch_accept_memory(phys_start, phys_end);
> + bitmap_clear(unaccepted->bitmap, range_start, len);
> + }
> + spin_unlock_irqrestore(&unaccepted_memory_lock, flags);
> +}
> +
> +bool range_contains_unaccepted_memory(phys_addr_t start, phys_addr_t end)
> +{
> + struct efi_unaccepted_memory *unaccepted;
> + unsigned long flags;
> + bool ret = false;
> + u64 unit_size;
> +
> + unaccepted = efi_get_unaccepted_table();
> + if (!unaccepted)
> + return false;
> +
> + unit_size = unaccepted->unit_size;
> +
> + /*
> + * Only care for the part of the range that is represented
> + * in the bitmap.
> + */
> + if (start < unaccepted->phys_base)
> + start = unaccepted->phys_base;
> + if (end < unaccepted->phys_base)
> + return false;
> +
> + /* Translate to offsets from the beginning of the bitmap */
> + start -= unaccepted->phys_base;
> + end -= unaccepted->phys_base;
> +
> + /*
> + * Also consider the unaccepted state of the *next* page. See fix #1 in
> + * the comment on load_unaligned_zeropad() in accept_memory().
> + */
> + if (!(end % unit_size))
> + end += unit_size;
> +
> + /* Make sure not to overrun the bitmap */
> + if (end > unaccepted->size * unit_size * BITS_PER_BYTE)
> + end = unaccepted->size * unit_size * BITS_PER_BYTE;
> +
> + spin_lock_irqsave(&unaccepted_memory_lock, flags);
> + while (start < end) {
> + if (test_bit(start / unit_size, unaccepted->bitmap)) {
> + ret = true;
> + break;
> + }
> +
> + start += unit_size;
> + }
> + spin_unlock_irqrestore(&unaccepted_memory_lock, flags);
> +
> + return ret;
> +}
> diff --git a/include/linux/efi.h b/include/linux/efi.h
> index efbe14641638..0f4620060ed8 100644
> --- a/include/linux/efi.h
> +++ b/include/linux/efi.h
> @@ -418,6 +418,7 @@ void efi_native_runtime_setup(void);
> #define LINUX_EFI_MOK_VARIABLE_TABLE_GUID EFI_GUID(0xc451ed2b, 0x9694, 0x45d3, 0xba, 0xba, 0xed, 0x9f, 0x89, 0x88, 0xa3, 0x89)
> #define LINUX_EFI_COCO_SECRET_AREA_GUID EFI_GUID(0xadf956ad, 0xe98c, 0x484c, 0xae, 0x11, 0xb5, 0x1c, 0x7d, 0x33, 0x64, 0x47)
> #define LINUX_EFI_BOOT_MEMMAP_GUID EFI_GUID(0x800f683f, 0xd08b, 0x423a, 0xa2, 0x93, 0x96, 0x5c, 0x3c, 0x6f, 0xe2, 0xb4)
> +#define LINUX_EFI_UNACCEPTED_MEM_TABLE_GUID EFI_GUID(0xd5d1de3c, 0x105c, 0x44f9, 0x9e, 0xa9, 0xbc, 0xef, 0x98, 0x12, 0x00, 0x31)
>
> #define RISCV_EFI_BOOT_PROTOCOL_GUID EFI_GUID(0xccd15fec, 0x6f73, 0x4eec, 0x83, 0x95, 0x3e, 0x69, 0xe4, 0xb9, 0x40, 0xbf)
>
> @@ -535,6 +536,16 @@ struct efi_boot_memmap {
> efi_memory_desc_t map[];
> };
>
> +struct efi_unaccepted_memory {
> + u32 version;
> + u32 unit_size;
> + u64 phys_base;
> + u64 size;
> + unsigned long bitmap[];
> +};
> +
> +void __init efi_unaccepted_table_init(void);
> +
> /*
> * Architecture independent structure for describing a memory map for the
> * benefit of efi_memmap_init_early(), and for passing context between
> @@ -637,6 +648,7 @@ extern struct efi {
> unsigned long tpm_final_log; /* TPM2 Final Events Log table */
> unsigned long mokvar_table; /* MOK variable config table */
> unsigned long coco_secret; /* Confidential computing secret table */
> + unsigned long unaccepted; /* Unaccepted memory table */
>
> efi_get_time_t *get_time;
> efi_set_time_t *set_time;
> diff --git a/mm/internal.h b/mm/internal.h
> index ed042e366d49..2e70f22d1b3f 100644
> --- a/mm/internal.h
> +++ b/mm/internal.h
> @@ -1100,7 +1100,13 @@ struct vma_prepare {
> struct vm_area_struct *remove2;
> };
>
> -#ifndef CONFIG_UNACCEPTED_MEMORY
> +#ifdef CONFIG_UNACCEPTED_MEMORY
> +
> +bool range_contains_unaccepted_memory(phys_addr_t start, phys_addr_t end);
> +void accept_memory(phys_addr_t start, phys_addr_t end);
> +
> +#else
> +
> static inline bool range_contains_unaccepted_memory(phys_addr_t start,
> phys_addr_t end)
> {
> @@ -1110,6 +1116,7 @@ static inline bool range_contains_unaccepted_memory(phys_addr_t start,
> static inline void accept_memory(phys_addr_t start, phys_addr_t end)
> {
> }
> +
> #endif
>
> #endif /* __MM_INTERNAL_H */
> --
> Kiryl Shutsemau / Kirill A. Shutemov
Powered by blists - more mailing lists