linux-kernel - Re: [PATCH 2/2] arm64: dts: qcom: ipq9574: Enable crypto nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 12 May 2023 11:22:00 +0200
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     Anusha Rao <quic_anusha@...cinc.com>, agross@...nel.org,
        andersson@...nel.org, konrad.dybcio@...aro.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
        mturquette@...libre.com, sboyd@...nel.org, p.zabel@...gutronix.de,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org
Cc:     quic_srichara@...cinc.com, quic_gokulsri@...cinc.com,
        quic_sjaganat@...cinc.com, quic_kathirav@...cinc.com,
        quic_arajkuma@...cinc.com, quic_poovendh@...cinc.com
Subject: Re: [PATCH 2/2] arm64: dts: qcom: ipq9574: Enable crypto nodes

On 12/05/2023 11:01, Anusha Rao wrote:
> Enable crypto support for ipq9574.
> 
> Signed-off-by: Anusha Rao <quic_anusha@...cinc.com>
> ---
>  arch/arm64/boot/dts/qcom/ipq9574.dtsi | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> index fea15f3cf910..3cda5aa8d03c 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> @@ -123,6 +123,26 @@
>  			clock-names = "core";
>  		};
>  
> +		cryptobam: dma-controller@...000 {
> +			compatible = "qcom,bam-v1.7.0";
> +			reg = <0x00704000 0x20000>;
> +			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
> +			#dma-cells = <1>;
> +			qcom,ee = <1>;
> +			qcom,controlled-remotely;
> +		};
> +
> +		crypto: crypto@...000 {
> +			compatible = "qcom,crypto-v5.1";

This compatible is deprecated. Take a look at the bindings - I think you
miss bindings for your SoC, which you should then use here.

Best regards,
Krzysztof