Message-ID: <94ff8d75d88c7ab356949ad319c3085e45ac2488.camel@mediatek.com>
Date:   Fri, 12 May 2023 01:24:03 +0000
From:   Kyrie Wu (吴晗) <Kyrie.Wu@...iatek.com>
To:     "hackerzheng666@...il.com" <hackerzheng666@...il.com>
CC:     "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "linux-mediatek@...ts.infradead.org" 
        <linux-mediatek@...ts.infradead.org>,
        "linux-media@...r.kernel.org" <linux-media@...r.kernel.org>,
        "linux@...ck-us.net" <linux@...ck-us.net>,
        "mchehab@...nel.org" <mchehab@...nel.org>,
        "zyytlz.wz@....com" <zyytlz.wz@....com>,
        "alex000young@...il.com" <alex000young@...il.com>,
        Bin Liu (刘彬) <bin.liu@...iatek.com>,
        Irui Wang (王瑞) <Irui.Wang@...iatek.com>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "matthias.bgg@...il.com" <matthias.bgg@...il.com>,
        "angelogioacchino.delregno@...labora.com" 
        <angelogioacchino.delregno@...labora.com>,
        "1395428693sheep@...il.com" <1395428693sheep@...il.com>
Subject: Re: [RESEND PATCH] media: mtk-jpeg: Fix use after free bug due to
 uncanceled work

On Tue, 2023-03-14 at 11:37 +0800, Zheng Hacker wrote:
> Kyrie Wu (吴晗) <Kyrie.Wu@...iatek.com> 于2023年3月14日周二 10:49写道：
> > 
> > On Thu, 2023-03-09 at 15:31 +0800, Zheng Hacker wrote:
> > > Dear Kyrie,
> > > 
> > > Guenter gave some advice about this issue in [1]. As we are not
> > > familiar with the code here, could you please see if the bug
> > > really
> > > exists?
> > > 
> > > [1]
> > > 
https://lore.kernel.org/all/e03134f9-9433-ab6b-170a-8ce752fccdeb@roeck-us.net/
> > > 
> > > Best regards,
> > > Zheng
> > 
> > Dear zheng,
> > 
> > I have no more questions for your patch, thank you for your
> > contribution to mtk jpeg driver.
> > 
> 
> Thanks for your detailed review and explanation about the code. I
> have
> learned a lot
> from it. Have a nice day :)
> 
> Best regards,
> Zheng
Dear Zheng,

I think that cancel_delayed_work, added in remove function, should
change to cancel_delayed_work_sync to solve UAF. The corresponding
operation flow is shown as follow:
      CPU0                      CPU1
                      |mtk_jpeg_job_timeout_work
mtk_jpeg_remove       |
  cancel_delayed_work |
  v4l2_m2m_release    |
    kfree(m2m_dev);   |
                      |
                      | v4l2_m2m_get_curr_priv
                      |  m2m_dev->curr_ctx //use

If cancel_delayed_work is called in async mode like above, and the
m2m_dev is freed. But it is used in mtk_jpeg_job_timeout_work, this
calling may cause UAF.

Thanks.
> 
> > > 
> > > 
> > > 
> > > Zheng Hacker <hackerzheng666@...il.com> 于2023年3月8日周三 17:11写道：
> > > > 
> > > > Dear Kyrie,
> > > > 
> > > > Sorry for my misunderstanding. I've seen the timeout worker is
> > > > bound
> > > > with mtk_jpegdec_timeout_work rather than
> > > > mtk_jpeg_job_timeout_work.So
> > > > the competition won't happen.
> > > > 
> > > > Back to the beginning scene, I still don't know if it's a UAF
> > > > issue
> > > > or
> > > > not. The normal schedule is very strong to me. If we can call
> > > > mtk_jpeg_remove directly without calling mtk_jpeg_release,
> > > > The UAF is still possible. Otherwis, I think it's safe here.
> > > > 
> > > > Best regards,
> > > > Zheng
> > > > 
> > > > Kyrie Wu (吴晗) <Kyrie.Wu@...iatek.com> 于2023年3月8日周三 15:39写道：
> > > > > 
> > > > > On Wed, 2023-03-08 at 14:10 +0800, Zheng Hacker wrote:
> > > > > > Hi Kyrie,
> > > > > > 
> > > > > > After reviewing the code, I found anothe possible code
> > > > > > path. As
> > > > > > I am
> > > > > > not familiar with the module. It has high possibility it's
> > > > > > wrong.
> > > > > > Could please help me check this? Very much appreciated for
> > > > > > your
> > > > > > valuable time.
> > > > > > 
> > > > > > In summary, mtk_jpegdec_worker was set in mtk_jpeg_open and
> > > > > > started
> > > > > > in
> > > > > > mtk_jpeg_multicore_dec_device_run, which made it running on
> > > > > > cpu1.
> > > > > > Inside the mtk_jpeg_multicore_dec_device_run, it will call
> > > > > > schedule_delayed_work  to start the timeout_work, which
> > > > > > will
> > > > > > make it
> > > > > > running on cpu2. Meanwhile, we can call
> > > > > > mtk_jpeg_release to cancel the job. But there might be a
> > > > > > race
> > > > > > between
> > > > > > mtk_jpegdec_worker and v4l2_m2m_cancel_job. It may call
> > > > > > v4l2_m2m_job_finish too early to wake up the event.
> > > > > > The remove will go on, the other race is as described
> > > > > > earlier.
> > > > > > 
> > > > > > cpu0                         cpu1                  cpu2
> > > > > > (1)->device_run
> > > > > > mtk_jpeg_multicore
> > > > > > _dec_device_run
> > > > > > queue_work
> > > > > > (jpeg->workqueue,
> > > > > > &ctx->jpeg_work);
> > > > > >                       (2)mtk_jpegdec_worker
> > > > > > (3)mtk_jpeg_release
> > > > > > v4l2_m2m_cancel_job
> > > > > > wait event
> > > > > > 
> > > > > >                       schedule_delayed_work
> > > > > >                                             (4)mtk_jpeg_job
> > > > > > _tim
> > > > > > eout_w
> > > > > > ork
> > > > > >                       (5)v4l2_m2m_job_finish
> > > > > >                       wake up
> > > > > > (6)mtk_jpeg_remove
> > > > > > v4l2_m2m_release
> > > > > > kfree(m2m_dev)
> > > > > >                                             (7)v4l2_m2m_get
> > > > > > _cur
> > > > > > r_priv
> > > > > > 
> > > > > 
> > > > > Dear zheng,
> > > > > 
> > > > > The mtk_jpeg_multicore_dec_device_run function is used for
> > > > > multi-
> > > > > hw
> > > > > jpeg decoding. Instead of scheduling
> > > > > mtk_jpeg_job_timeout_work,
> > > > > mtk_jpegdec_worker is scheduled in this function.
> > > > > 
> > > > > The mtk_jpeg_dec_device_run function is used for single hw
> > > > > jpeg
> > > > > decoding, which schedules mtk_jpeg_job_timeout_work.
> > > > > 
> > > > > A driver is either a single hw driver or a multi-hw driver
> > > > > and
> > > > > cannot
> > > > > represent both at the same time.
> > > > > mtk_jpeg_job_timeout_work and mtk_jpegdec_worker cannot be
> > > > > scheduled at
> > > > > the same time.
> > > > > So mtk_jpeg_job_timeout_work calls v4l2_m2m_job_finish would
> > > > > not
> > > > > cause
> > > > > competition between the mtk_jpegdec_worker and
> > > > > v4l2_m2m_cancel_job.
> > > > > 
> > > > > Regards,
> > > > > Kyrie.
> > > > > 
> > > > > 
> > > > > > Kyrie Wu (吴晗) <Kyrie.Wu@...iatek.com> 于2023年3月8日周三 11:32写道：
> > > > > > > 
> > > > > > > On Wed, 2023-03-08 at 10:20 +0800, Zheng Hacker wrote:
> > > > > > > > Hi Kyrie,
> > > > > > > > 
> > > > > > > > Thank you for your careful analysis and response. I
> > > > > > > > still
> > > > > > > > have
> > > > > > > > some
> > > > > > > > areas that I don't quite understand and would like to
> > > > > > > > ask
> > > > > > > > for
> > > > > > > > clarification. That is, how do the function pointers
> > > > > > > > for
> > > > > > > > stop
> > > > > > > > streaming, initialized as mtk_jpeg_enc_stop_streaming
> > > > > > > > and
> > > > > > > > mtk_jpeg_dec_stop_streaming, ensure that the worker is
> > > > > > > > canceled?
> > > > > > > > I
> > > > > > > > would greatly appreciate your response.
> > > > > > > > 
> > > > > > > > Best regards,
> > > > > > > > Zheng
> > > > > > > 
> > > > > > > Dear zheng,
> > > > > > > 
> > > > > > > For stop streaming, what I mean is that stoppping jpeg
> > > > > > > decoding or
> > > > > > > encoding.
> > > > > > > Ok, let me introduce the sw flow of stop streaming:
> > > > > > > Firstly, the app will call v4l2_m2m_ioctl_streamoff,
> > > > > > > which
> > > > > > > will
> > > > > > > call
> > > > > > > v4l2_m2m_cancel_job, if it finds a job running(as you
> > > > > > > note,
> > > > > > > cpu1 is
> > > > > > > running), it will wait event, the event is wake up by
> > > > > > > v4l2_m2m_job_finish function. And v4l2_m2m_job_finish is
> > > > > > > called by
> > > > > > > jpeg
> > > > > > > dec/enc irq handler, which means that the waitting would
> > > > > > > result mtk
> > > > > > > hw
> > > > > > > to finish dec/enc, irq will occur and irq handler would
> > > > > > > cancel
> > > > > > > timeout
> > > > > > > worker. The follow is shown as blow.
> > > > > > > v4l2_m2m_ioctl_streamoff
> > > > > > >    v4l2_m2m_cancel_job                mtk_jpeg_enc_irq/mt
> > > > > > > k_jp
> > > > > > > eg_dec
> > > > > > > _irq
> > > > > > >        wait evnet <------ wake up ------
> > > > > > > v4l2_m2m_job_finish
> > > > > > >                                         cancel timeout
> > > > > > > work
> > > > > > > 
> > > > > > > As mentioned above, if it is normal stop streaming
> > > > > > > action,
> > > > > > > there
> > > > > > > will
> > > > > > > be no happen that the timeout worker does not canceled.
> > > > > > > 
> > > > > > > But if mtk_jpeg_remove is called directly without above
> > > > > > > flow,
> > > > > > > it
> > > > > > > would
> > > > > > > cause lots of issues.
> > > > > > > 
> > > > > > > Regards,
> > > > > > > Kyrie.
> > > > > > > > 
> > > > > > > > Kyrie Wu (吴晗) <Kyrie.Wu@...iatek.com> 于2023年3月8日周三
> > > > > > > > 10:02写道：
> > > > > > > > > 
> > > > > > > > > On Tue, 2023-03-07 at 23:03 +0800, Zheng Hacker
> > > > > > > > > wrote:
> > > > > > > > > > The timer function was set in mtk_jpeg_probe with
> > > > > > > > > > mtk_jpeg_job_timeout_work function.
> > > > > > > > > > And the worker is started in
> > > > > > > > > > mtk_jpeg_dec_device_run.
> > > > > > > > > > There are two functions (mtk_jpeg_enc_irq and
> > > > > > > > > > mtk_jpeg_dec_irq)
> > > > > > > > > > which
> > > > > > > > > > may cancel the worker.
> > > > > > > > > > They are used as IRQ handler function which is
> > > > > > > > > > saved as
> > > > > > > > > > function
> > > > > > > > > > pointer in a variable.
> > > > > > > > > > In mtk_jpeg_probe, they are registered by
> > > > > > > > > > devm_request_irq:
> > > > > > > > > > 
> > > > > > > > > > ret = devm_request_irq(&pdev->dev,
> > > > > > > > > >                jpeg_irq,
> > > > > > > > > >                jpeg->variant->irq_handler,
> > > > > > > > > >                0,
> > > > > > > > > >                pdev->name, jpeg);
> > > > > > > > > >     if (ret) {
> > > > > > > > > >       dev_err(&pdev->dev, "Failed to request
> > > > > > > > > > jpeg_irq
> > > > > > > > > > %d
> > > > > > > > > > (%d)\n",
> > > > > > > > > >         jpeg_irq, ret);
> > > > > > > > > >       return ret;
> > > > > > > > > >     }
> > > > > > > > > > 
> > > > > > > > > > However, if we remove the module without triggering
> > > > > > > > > > the
> > > > > > > > > > irq,
> > > > > > > > > > the
> > > > > > > > > > worker will never be removed.
> > > > > > > > > > 
> > > > > > > > > > As for the schedule, mtk_jpeg_dec_device_run and
> > > > > > > > > > mtk_jpeg_enc_device_run will start the worker.
> > > > > > > > > > The schedule invoking is quite complicated. As far
> > > > > > > > > > as I
> > > > > > > > > > know,
> > > > > > > > > > the
> > > > > > > > > > invoking chain is as follows:
> > > > > > > > > > 
> > > > > > > > > > v4l2_m2m_init->v4l2_m2m_device_run_work-
> > > > > > > > > > > v4l2_m2m_try_run
> > > > > > > > > > 
> > > > > > > > > > the v4l2_m2m_device_run_work function is also a
> > > > > > > > > > worker
> > > > > > > > > > which
> > > > > > > > > > is
> > > > > > > > > > set
> > > > > > > > > > in
> > > > > > > > > > v4l2_m2m_init and started in
> > > > > > > > > > v4l2_m2m_schedule_next_job.
> > > > > > > > > > 
> > > > > > > > > > Before calling remove function,
> > > > > > > > > > the  mtk_jpeg_release
> > > > > > > > > > was
> > > > > > > > > > invoked
> > > > > > > > > > to
> > > > > > > > > > release the related resource.
> > > > > > > > > > 
> > > > > > > > > > v4l2_m2m_cancel_job will cancel the job by calling
> > > > > > > > > > m2m_dev->m2m_ops->job_abort(m2m_ctx->priv).
> > > > > > > > > > 
> > > > > > > > > > But this will only cancel the current queue by
> > > > > > > > > > list_del(&m2m_dev->curr_ctx->queue);
> > > > > > > > > > 
> > > > > > > > > > I think this can not cancel the posted task
> > > > > > > > > > mentioned
> > > > > > > > > > before.
> > > > > > > > > > So
> > > > > > > > > > I
> > > > > > > > > > think if mtk_jpeg_job_timeout_work
> > > > > > > > > > 
> > > > > > > > > > is working on, and using jpeg->m2m_dev after
> > > > > > > > > > freeing it
> > > > > > > > > > in
> > > > > > > > > > mtk_jpeg_remove, it will cause a UAF bug.
> > > > > > > > > > 
> > > > > > > > > > static int mtk_jpeg_release(struct file *file)
> > > > > > > > > > {
> > > > > > > > > >   struct mtk_jpeg_dev *jpeg = video_drvdata(file);
> > > > > > > > > >   struct mtk_jpeg_ctx *ctx =
> > > > > > > > > > mtk_jpeg_fh_to_ctx(file-
> > > > > > > > > > > private_data);
> > > > > > > > > > 
> > > > > > > > > >   mutex_lock(&jpeg->lock);
> > > > > > > > > >   v4l2_ctrl_handler_free(&ctx->ctrl_hdl);
> > > > > > > > > >   [1] v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
> > > > > > > > > >   v4l2_fh_del(&ctx->fh);
> > > > > > > > > >   v4l2_fh_exit(&ctx->fh);
> > > > > > > > > >   kfree(ctx);
> > > > > > > > > >   mutex_unlock(&jpeg->lock);
> > > > > > > > > >   return 0;
> > > > > > > > > > }
> > > > > > > > > > 
> > > > > > > > > > void v4l2_m2m_ctx_release(struct v4l2_m2m_ctx
> > > > > > > > > > *m2m_ctx)
> > > > > > > > > > {
> > > > > > > > > >   /* wait until the current context is dequeued
> > > > > > > > > > from
> > > > > > > > > > job_queue */
> > > > > > > > > >   [2] v4l2_m2m_cancel_job(m2m_ctx);
> > > > > > > > > > 
> > > > > > > > > >   vb2_queue_release(&m2m_ctx->cap_q_ctx.q);
> > > > > > > > > >   vb2_queue_release(&m2m_ctx->out_q_ctx.q);
> > > > > > > > > > 
> > > > > > > > > >   kfree(m2m_ctx);
> > > > > > > > > > }
> > > > > > > > > > 
> > > > > > > > > > Note that all of this is static analysis, which may
> > > > > > > > > > be
> > > > > > > > > > false
> > > > > > > > > > positive.
> > > > > > > > > > Feel free to tell me if there is something I've
> > > > > > > > > > missed.
> > > > > > > > > > 
> > > > > > > > > > Regard,
> > > > > > > > > > Zheng
> > > > > > > > > 
> > > > > > > > > Dear Zheng,
> > > > > > > > > 
> > > > > > > > > You set up an application scenario:
> > > > > > > > > cpu1 is using the mtk-jpeg driver and timeout work
> > > > > > > > > has
> > > > > > > > > been
> > > > > > > > > scheduled.
> > > > > > > > > At the same time cpu0 wanted to remove the mtk-jpeg
> > > > > > > > > driver,
> > > > > > > > > which
> > > > > > > > > caused the UAF bug.
> > > > > > > > > I wonder if such an irrational application scenario
> > > > > > > > > could
> > > > > > > > > exist.
> > > > > > > > > This
> > > > > > > > > scenario, as you described, not only leads to the
> > > > > > > > > problems you
> > > > > > > > > mentioned, but also to output&capture memory leaks
> > > > > > > > > and
> > > > > > > > > unreleased
> > > > > > > > > resources, such as spinlock.
> > > > > > > > > Typically, if we want to remove the driver, we
> > > > > > > > > firstly do
> > > > > > > > > stop
> > > > > > > > > streaming, which ensures that the worker has been
> > > > > > > > > canceled.
> > > > > > > > > I agree with your changes from the perspective of
> > > > > > > > > strengthening
> > > > > > > > > the
> > > > > > > > > robustness of the driver code.
> > > > > > > > > 
> > > > > > > > > Regards,
> > > > > > > > > Kyrie.
> > > > > > > > > > 
> > > > > > > > > > Irui Wang (王瑞) <Irui.Wang@...iatek.com>
> > > > > > > > > > 于2023年3月7日周二
> > > > > > > > > > 18:23写道：
> > > > > > > > > > > 
> > > > > > > > > > > Dear Angelo and Zheng,
> > > > > > > > > > > 
> > > > > > > > > > > Thanks for your patch and comments.
> > > > > > > > > > > 
> > > > > > > > > > > Dear Kyrie,
> > > > > > > > > > > 
> > > > > > > > > > > Please help to check this, thanks.
> > > > > > > > > > > 
> > > > > > > > > > > Best Regards
> > > > > > > > > > > 
> > > > > > > > > > > On Tue, 2023-03-07 at 10:49 +0100,
> > > > > > > > > > > AngeloGioacchino
> > > > > > > > > > > Del
> > > > > > > > > > > Regno
> > > > > > > > > > > wrote:
> > > > > > > > > > > > Il 07/03/23 10:27, Zheng Hacker ha scritto:
> > > > > > > > > > > > > Hi,
> > > > > > > > > > > > > 
> > > > > > > > > > > > > Is there anyone who can help with this? I can
> > > > > > > > > > > > > provide
> > > > > > > > > > > > > more
> > > > > > > > > > > > > details
> > > > > > > > > > > > > like invoking chain if needed.
> > > > > > > > > > > > > 
> > > > > > > > > > > > 
> > > > > > > > > > > > Providing more details is always good. Please
> > > > > > > > > > > > do.
> > > > > > > > > > > > 
> > > > > > > > > > > > Meanwhile, adding Irui Wang to the loop: he's
> > > > > > > > > > > > doing
> > > > > > > > > > > > mtk-
> > > > > > > > > > > > jpeg.
> > > > > > > > > > > > 
> > > > > > > > > > > > Regards,
> > > > > > > > > > > > Angelo
> > > > > > > > > > > > 
> > > > > > > > > > > > > Thanks,
> > > > > > > > > > > > > Zheng
> > > > > > > > > > > > > 
> > > > > > > > > > > > > Zheng Wang <zyytlz.wz@....com> 于2023年3月6日周一
> > > > > > > > > > > > > 14:28写道：
> > > > > > > > > > > > > > 
> > > > > > > > > > > > > > In mtk_jpeg_probe, &jpeg->job_timeout_work
> > > > > > > > > > > > > > is
> > > > > > > > > > > > > > bound
> > > > > > > > > > > > > > with
> > > > > > > > > > > > > > mtk_jpeg_job_timeout_work. Then
> > > > > > > > > > > > > > mtk_jpeg_dec_device_run
> > > > > > > > > > > > > > and mtk_jpeg_enc_device_run may be called
> > > > > > > > > > > > > > to
> > > > > > > > > > > > > > start
> > > > > > > > > > > > > > the
> > > > > > > > > > > > > > work.
> > > > > > > > > > > > > > If we remove the module which will call
> > > > > > > > > > > > > > mtk_jpeg_remove
> > > > > > > > > > > > > > to make cleanup, there may be a unfinished
> > > > > > > > > > > > > > work. The
> > > > > > > > > > > > > > possible sequence is as follows, which will
> > > > > > > > > > > > > > cause a
> > > > > > > > > > > > > > typical UAF bug.
> > > > > > > > > > > > > > 
> > > > > > > > > > > > > > Fix it by canceling the work before cleanup
> > > > > > > > > > > > > > in
> > > > > > > > > > > > > > the
> > > > > > > > > > > > > > mtk_jpeg_remove
> > > > > > > > > > > > > > 
> > > > > > > > > > > > > > CPU0                  CPU1
> > > > > > > > > > > > > > 
> > > > > > > > > > > > > >                      |mtk_jpeg_job_timeout_
> > > > > > > > > > > > > > work
> > > > > > > > > > > > > > mtk_jpeg_remove     |
> > > > > > > > > > > > > >    v4l2_m2m_release  |
> > > > > > > > > > > > > >      kfree(m2m_dev); |
> > > > > > > > > > > > > >                      |
> > > > > > > > > > > > > >                      |
> > > > > > > > > > > > > > v4l2_m2m_get_curr_priv
> > > > > > > > > > > > > >                      |   m2m_dev->curr_ctx
> > > > > > > > > > > > > > //use
> > > > > > > > > > > > > > 
> > > > > > > > > > > > > > Signed-off-by: Zheng Wang <
> > > > > > > > > > > > > > zyytlz.wz@....com>
> > > > > > > > > > > > > > ---
> > > > > > > > > > > > > > 
> > > > > > > > > > > > > > drivers/media/platform/mediatek/jpeg/mtk_jp
> > > > > > > > > > > > > > eg_c
> > > > > > > > > > > > > > ore.c
> > > > > > > > > > > > > > > 
> > > > > > > > > > > > > > 
> > > > > > > > > > > > > > 2 +-
> > > > > > > > > > > > > >   1 file changed, 1 insertion(+), 1
> > > > > > > > > > > > > > deletion(-)
> > > > > > > > > > > > > > 
> > > > > > > > > > > > > > diff --git
> > > > > > > > > > > > > > a/drivers/media/platform/mediatek/jpeg/mtk_
> > > > > > > > > > > > > > jpeg
> > > > > > > > > > > > > > _core.
> > > > > > > > > > > > > > c
> > > > > > > > > > > > > > b/drivers/media/platform/mediatek/jpeg/mtk_
> > > > > > > > > > > > > > jpeg
> > > > > > > > > > > > > > _core.
> > > > > > > > > > > > > > c
> > > > > > > > > > > > > > index 969516a940ba..364513e7897e 100644
> > > > > > > > > > > > > > ---
> > > > > > > > > > > > > > a/drivers/media/platform/mediatek/jpeg/mtk_
> > > > > > > > > > > > > > jpeg
> > > > > > > > > > > > > > _core.
> > > > > > > > > > > > > > c
> > > > > > > > > > > > > > +++
> > > > > > > > > > > > > > b/drivers/media/platform/mediatek/jpeg/mtk_
> > > > > > > > > > > > > > jpeg
> > > > > > > > > > > > > > _core.
> > > > > > > > > > > > > > c
> > > > > > > > > > > > > > @@ -1793,7 +1793,7 @@ static int
> > > > > > > > > > > > > > mtk_jpeg_probe(struct
> > > > > > > > > > > > > > platform_device *pdev)
> > > > > > > > > > > > > >   static int mtk_jpeg_remove(struct
> > > > > > > > > > > > > > platform_device
> > > > > > > > > > > > > > *pdev)
> > > > > > > > > > > > > >   {
> > > > > > > > > > > > > >          struct mtk_jpeg_dev *jpeg =
> > > > > > > > > > > > > > platform_get_drvdata(pdev);
> > > > > > > > > > > > > > -
> > > > > > > > > > > > > > +       cancel_delayed_work(&jpeg-
> > > > > > > > > > > > > > > job_timeout_work);
> > > > > > > > > > > > > > 
> > > > > > > > > > > > > >          pm_runtime_disable(&pdev->dev);
> > > > > > > > > > > > > >          video_unregister_device(jpeg-
> > > > > > > > > > > > > > >vdev);
> > > > > > > > > > > > > >          v4l2_m2m_release(jpeg->m2m_dev);
> > > > > > > > > > > > > > --
> > > > > > > > > > > > > > 2.25.1
> > > > > > > > > > > > > > 
> > > > > > > > > > > > 
> > > > > > > > > > > > 
> > > > > > > > > > > > 

Powered by blists - more mailing lists