lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230512000014.118942-3-kai.heng.feng@canonical.com>
Date:   Fri, 12 May 2023 08:00:14 +0800
From:   Kai-Heng Feng <kai.heng.feng@...onical.com>
To:     bhelgaas@...gle.com
Cc:     mika.westerberg@...ux.intel.com, koba.ko@...onical.com,
        sathyanarayanan.kuppuswamy@...ux.intel.com,
        Kai-Heng Feng <kai.heng.feng@...onical.com>,
        Mahesh J Salgaonkar <mahesh@...ux.ibm.com>,
        "Oliver O'Halloran" <oohall@...il.com>,
        linuxppc-dev@...ts.ozlabs.org, linux-pci@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH v6 3/3] PCI/DPC: Disable DPC interrupt during suspend

PCIe services that share an IRQ with PME, such as AER or DPC, may cause a
spurious wakeup on system suspend. Since DPC depends on AER to work, disable
DPC interrupt notification during the system suspend process as AER interrupt
notification is already disabled by previous patch.

As Per PCIe Base Spec 5.0, section 5.2, titled "Link State Power Management",
TLP and DLLP transmission are disabled for a Link in L2/L3 Ready (D3hot), L2
(D3cold with aux power) and L3 (D3cold) states. So disabling the DPC
notification during suspend and re-enabling them during the resume process
should not affect the basic functionality.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216295
Reviewed-by: Mika Westerberg <mika.westerberg@...ux.intel.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
---
v6:
v5:
 - Wording.

v4:
v3:
 - No change.

v2:
 - Only disable DPC IRQ.
 - No more check on PME IRQ#.

 drivers/pci/pcie/dpc.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index 3ceed8e3de41..d2d845c20438 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -384,6 +384,30 @@ static int dpc_probe(struct pcie_device *dev)
 	return status;
 }
 
+static int dpc_suspend(struct pcie_device *dev)
+{
+	struct pci_dev *pdev = dev->port;
+	u16 ctl;
+
+	pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, &ctl);
+	ctl &= ~PCI_EXP_DPC_CTL_INT_EN;
+	pci_write_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, ctl);
+
+	return 0;
+}
+
+static int dpc_resume(struct pcie_device *dev)
+{
+	struct pci_dev *pdev = dev->port;
+	u16 ctl;
+
+	pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, &ctl);
+	ctl |= PCI_EXP_DPC_CTL_INT_EN;
+	pci_write_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_CTL, ctl);
+
+	return 0;
+}
+
 static void dpc_remove(struct pcie_device *dev)
 {
 	struct pci_dev *pdev = dev->port;
@@ -399,6 +423,8 @@ static struct pcie_port_service_driver dpcdriver = {
 	.port_type	= PCIE_ANY_PORT,
 	.service	= PCIE_PORT_SERVICE_DPC,
 	.probe		= dpc_probe,
+	.suspend	= dpc_suspend,
+	.resume		= dpc_resume,
 	.remove		= dpc_remove,
 };
 
-- 
2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ