linux-kernel - Re: HP iLO (intel gen8, gen9) and intremap=off

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CAA85sZv7ZfGN_tDcH3ssrEpU_-vw=3m-VG5d4GN3_i8Y8Xr-5A@mail.gmail.com>
Date:   Sun, 14 May 2023 00:32:31 +0200
From:   Ian Kumlien <ian.kumlien@...il.com>
To:     "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: HP iLO (intel gen8, gen9) and intremap=off

On Fri, May 12, 2023 at 10:28 PM Ian Kumlien <ian.kumlien@...il.com> wrote:
>
> Hi,
>
> On older intel HP servers, as in Gen8 and 9, there is a issue with
> interrupt remapping and iLO.
>
> I have been thinking of patching this, but haven't read up on the
> quirks system enough... And it keeps hitting me in different ways.
>
> So, if you boot with a ilo console (web) on a gen8 it will work, but
> it will be REALLY slow. If you disconnect it and reconnect, iLO will
> break (dmar errors).
>
> While not good, itt's mainly just annoying...
>
> However, on gen9, it can apparently cause memory thrashing for virtual
> cds (as in attach storage via ilo).
>
> I wasn't expecting it but I've been wondering why a gen9 machine
> couldn't be installed all day - with issues like packages failing
> signature checks when they are on the "local installation media"...
>
> What kind of information would you need from me to workaround this?
> PCI ids of iLOs?

As an example, reconnecting console results in:
[   43.908711] usb 1-1: USB disconnect, device number 2
[   46.801589] DMAR: DRHD: handling fault status reg 102
[   46.801603] DMAR: [INTR-REMAP] Request device [01:00.0] fault index
0x19 [fault reason 0x26] Blocked an interrupt request due to source-id
verification failure

Which of course is ilo:
lspci -vvvv -s 01:00.0
01:00.0 System peripheral: Hewlett-Packard Company Integrated
Lights-Out Standard Slave Instrumentation & System Support (rev 05)
Subsystem: Hewlett-Packard Company iLO4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
NUMA node: 0
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at f7df0000 (32-bit, non-prefetchable) [size=512]
Region 2: I/O ports at 3400 [size=256]
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000  Data: 0000
Capabilities: [c0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: CorrErr- NonFatalErr+ FatalErr+ UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s <4us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1
TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: hpwdt
Kernel modules: hpwdt

Attached full dmesg, the sr1 things is me playing with the virtual
cd-rom trying to see if the bug there exists on gen8 as well but no.

View attachment "dmesg.txt" of type "text/plain" (101995 bytes)