| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230514123130.41172-11-jahau@rocketmail.com>
Date: Sun, 14 May 2023 14:31:30 +0200
From: Jakob Hauser <jahau@...ketmail.com>
To: Sebastian Reichel <sre@...nel.org>, Lee Jones <lee@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: Beomho Seo <beomho.seo@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Stephan Gerhold <stephan@...hold.net>,
Raymond Hackley <raymondhackley@...tonmail.com>,
Pavel Machek <pavel@....cz>, Axel Lin <axel.lin@...ics.com>,
ChiYuan Huang <cy_huang@...htek.com>,
Linus Walleij <linus.walleij@...aro.org>,
Henrik Grimler <henrik@...mler.se>, linux-pm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
phone-devel@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht,
Jakob Hauser <jahau@...ketmail.com>
Subject: [PATCH v5 10/10] dt-bindings: Add rt5033 mfd, regulator and charger
Add device tree binding documentation for rt5033 multifunction device, voltage
regulator and battery charger.
Cc: Beomho Seo <beomho.seo@...sung.com>
Cc: Chanwoo Choi <cw00.choi@...sung.com>
Signed-off-by: Jakob Hauser <jahau@...ketmail.com>
Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
---
The patch is based on torvalds/linux v6.4-rc1.
The drivers for rt5033 (mfd) and rt5033-regulator are existing. Whereas the
the driver rt5033-charger is new in this patchset.
Changes in v5:
- In file "richtek,rt5033-charger.yaml" fixed typo on "PMIC" in the title.
- In the charger file changed the general "connector" property into
vendor-specific "richtek,usb-connector".
- In the charger file added $ref to phandle for "monitored-battery" and
"richtek,usb-connector".
- In charger file removed line "maxItems: 1" from property
"richtek,usb-connector" because dt_binding_check complained about it.
- In the mfd example added the "power-supplies" connection between fuel-gauge
and charger. As the example fuel-gauge contains compatible
"richtek,rt5033-battery", dt_binding_check was rather picky to implement
that node completely.
.../bindings/mfd/richtek,rt5033.yaml | 138 ++++++++++++++++++
.../power/supply/richtek,rt5033-charger.yaml | 65 +++++++++
2 files changed, 203 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
new file mode 100644
index 000000000000..386b1a50158a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/richtek,rt5033.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5033 Power Management Integrated Circuit
+
+maintainers:
+ - Jakob Hauser <jahau@...ketmail.com>
+
+description:
+ RT5033 is a multifunction device which includes battery charger, fuel gauge,
+ flash LED current source, LDO and synchronous Buck converter for portable
+ applications. It is interfaced to host controller using I2C interface. The
+ battery fuel gauge uses a separate I2C bus.
+
+properties:
+ compatible:
+ const: richtek,rt5033
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ regulators:
+ description:
+ The regulators of RT5033 have to be instantiated under a sub-node named
+ "regulators". For SAFE_LDO voltage there is only one value of 4.9 V. LDO
+ voltage ranges from 1.2 V to 3.0 V in 0.1 V steps. BUCK voltage ranges
+ from 1.0 V to 3.0 V in 0.1 V steps.
+ type: object
+ patternProperties:
+ "^(SAFE_LDO|LDO|BUCK)$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+ unevaluatedProperties: false
+ additionalProperties: false
+
+ charger:
+ type: object
+ $ref: /schemas/power/supply/richtek,rt5033-charger.yaml#
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ battery: battery {
+ compatible = "simple-battery";
+ precharge-current-microamp = <450000>;
+ constant-charge-current-max-microamp = <1000000>;
+ charge-term-current-microamp = <150000>;
+ precharge-upper-limit-microvolt = <3500000>;
+ constant-charge-voltage-max-microvolt = <4350000>;
+ };
+
+ extcon {
+ usb_con: connector {
+ compatible = "usb-b-connector";
+ label = "micro-USB";
+ type = "micro";
+ };
+ };
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ fuel-gauge@35 {
+ compatible = "richtek,rt5033-battery";
+ reg = <0x35>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&fg_alert_default>;
+
+ power-supplies = <&rt5033_charger>;
+ };
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ pmic@34 {
+ compatible = "richtek,rt5033";
+ reg = <0x34>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <62 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_default>;
+
+ regulators {
+ safe_ldo_reg: SAFE_LDO {
+ regulator-name = "SAFE_LDO";
+ regulator-min-microvolt = <4900000>;
+ regulator-max-microvolt = <4900000>;
+ regulator-always-on;
+ };
+ ldo_reg: LDO {
+ regulator-name = "LDO";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ buck_reg: BUCK {
+ regulator-name = "BUCK";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ };
+
+ rt5033_charger: charger {
+ compatible = "richtek,rt5033-charger";
+ monitored-battery = <&battery>;
+ richtek,usb-connector = <&usb_con>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
new file mode 100644
index 000000000000..5b3edd79a523
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt5033-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5033 PMIC Battery Charger
+
+maintainers:
+ - Jakob Hauser <jahau@...ketmail.com>
+
+description:
+ The battery charger of the multifunction device RT5033 has to be instantiated
+ under sub-node named "charger" using the following format.
+
+properties:
+ compatible:
+ const: richtek,rt5033-charger
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ Phandle to the monitored battery according to battery.yaml. The battery
+ node needs to contain five parameters.
+
+ precharge-current-microamp:
+ Current of pre-charge mode. The pre-charge current levels are 350 mA
+ to 650 mA programmed by I2C per 100 mA.
+
+ constant-charge-current-max-microamp:
+ Current of fast-charge mode. The fast-charge current levels are 700 mA
+ to 2000 mA programmed by I2C per 100 mA.
+
+ charge-term-current-microamp:
+ This property is end of charge current. Its level ranges from 150 mA
+ to 600 mA. Between 150 mA and 300 mA in 50 mA steps, between 300 mA and
+ 600 mA in 100 mA steps.
+
+ precharge-upper-limit-microvolt:
+ Voltage of pre-charge mode. If the battery voltage is below the pre-charge
+ threshold voltage, the charger is in pre-charge mode with pre-charge
+ current. Its levels are 2.3 V to 3.8 V programmed by I2C per 0.1 V.
+
+ constant-charge-voltage-max-microvolt:
+ Battery regulation voltage of constant voltage mode. This voltage levels
+ from 3.65 V to 4.4 V by I2C per 0.025 V.
+
+ richtek,usb-connector:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to a USB connector according to usb-connector.yaml. The connector
+ should be a child of the extcon device.
+
+required:
+ - monitored-battery
+
+additionalProperties: false
+
+examples:
+ - |
+ charger {
+ compatible = "richtek,rt5033-charger";
+ monitored-battery = <&battery>;
+ richtek,usb-connector = <&usb_con>;
+ };
--
2.39.2
Powered by blists - more mailing lists