[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZGENDwGXkuhrCGFY@pidgin.makrotopia.org>
Date: Sun, 14 May 2023 18:32:15 +0200
From: Daniel Golle <daniel@...rotopia.org>
To: Simon Horman <simon.horman@...igine.com>
Cc: linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
linux-mediatek@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Felix Fietkau <nbd@....name>,
Lorenzo Bianconi <lorenzo@...nel.org>,
Ryder Lee <ryder.lee@...iatek.com>,
Shayne Chen <shayne.chen@...iatek.com>,
Sean Wang <sean.wang@...iatek.com>,
Kalle Valo <kvalo@...nel.org>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Alexander Couzens <lynxis@...0.eu>,
Sujuan Chen <sujuan.chen@...iatek.com>,
Bo Jiao <bo.jiao@...iatek.com>,
Nicolas Cavallari <nicolas.cavallari@...en-communications.fr>,
Howard Hsu <howard-yh.hsu@...iatek.com>,
MeiChia Chiu <MeiChia.Chiu@...iatek.com>,
Peter Chiu <chui-hao.chiu@...iatek.com>,
Johannes Berg <johannes.berg@...el.com>,
Wang Yufen <wangyufen@...wei.com>,
Lorenz Brun <lorenz@...n.one>
Subject: Re: [PATCH] wifi: mt76: mt7915: add support for MT7981
Hi Simon,
thank you for reviewing!
On Sun, May 14, 2023 at 04:53:43PM +0200, Simon Horman wrote:
> On Sat, May 13, 2023 at 03:35:51PM +0200, Daniel Golle wrote:
> > From: Alexander Couzens <lynxis@...0.eu>
> >
> > Add support for the MediaTek MT7981 SoC which is similar to the MT7986
> > but with a newer IP cores and only 2x ARM Cortex-A53 instead of 4x.
> > Unlike MT7986 the MT7981 can only connect a single wireless frontend,
> > usually MT7976 is used for DBDC.
> >
> > Signed-off-by: Alexander Couzens <lynxis@...0.eu>
> > Signed-off-by: Daniel Golle <daniel@...rotopia.org>
>
> ...
>
> > @@ -489,7 +516,10 @@ static int mt7986_wmac_adie_patch_7976(struct mt7915_dev *dev, u8 adie)
> > rg_xo_01 = 0x1d59080f;
> > rg_xo_03 = 0x34c00fe0;
> > } else {
> > - rg_xo_01 = 0x1959f80f;
> > + if (is_mt7981(&dev->mt76))
> > + rg_xo_01 = 0x1959c80f;
> > + else if (is_mt7986(&dev->mt76))
> > + rg_xo_01 = 0x1959f80f;
>
> Hi Daniel,
>
> rg_xo_01 will be used uninitialised below if we get here
> and neither of the conditions above are true.
>
> Can this occur?
No, it cannot occur. Either of is_mt7981() or is_mt7986() will return
true, as the driver is bound via one of the two compatibles
'mediatek,mt7986-wmac' or newly added 'mediatek,mt7981-wmac'.
Based on that the match_data is either 0x7986 or 0x7981, which is then
used as chip_id, which is used by the is_mt7981() and is_mt7986()
functions.
>
> > rg_xo_03 = 0x34d00fe0;
> > }
> >
>
> ...
>
Powered by blists - more mailing lists