| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 14 May 2023 20:27:41 -0700
From: Bjorn Andersson <quic_bjorande@...cinc.com>
To: Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Johan Hovold <johan@...nel.org>
CC: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
<linux-arm-msm@...r.kernel.org>, <linux-phy@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Neil Armstrong <neil.armstrong@...aro.org>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
Abel Vesa <abel.vesa@...aro.org>,
Steev Klimaszewski <steev@...i.org>,
Johan Hovold <johan+linaro@...nel.org>
Subject: [PATCH v3 6/8] phy: qcom-qmp-combo: Introduce drm_bridge
The QMP combo PHY sits in an of_graph connected between the DisplayPort
controller and a USB Type-C connector (or possibly a redriver).
The TCPM needs to be able to convey the HPD signal to the DisplayPort
controller, but no directly link is provided by DeviceTree so the signal
needs to "pass through" the QMP combo phy.
Handle this by introducing a drm_bridge which upon initialization finds
the next bridge (i.e. the usb-c-connector) and chain this together. This
way HPD changes in the connector will propagate to the DisplayPort
driver.
The connector bridge is resolved lazily, as the TCPM is expected to be
able to resolve the typec mux and switch at probe time, so the QMP combo
phy will probe before the TCPM.
Acked-by: Neil Armstrong <neil.armstrong@...aro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
Tested-by: Abel Vesa <abel.vesa@...aro.org>
Tested-by: Steev Klimaszewski <steev@...i.org>
Tested-by: Neil Armstrong <neil.armstrong@...aro.org> # on HDK8450
Tested-by: Johan Hovold <johan+linaro@...nel.org> # X13s
Reviewed-by: Johan Hovold <johan+linaro@...nel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@...cinc.com>
---
Changes since v2:
- None
Changes since v1:
- Wrap DRM-related code in CONFIG_DRM guard
- Inroduce DRM-dependencies in Kconfig
- Dropped dev_err_probe() usage
drivers/phy/qualcomm/Kconfig | 2 +
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 46 +++++++++++++++++++++++
2 files changed, 48 insertions(+)
diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
index 45330e0f66fe..67a45d95250d 100644
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -60,8 +60,10 @@ config PHY_QCOM_QMP_COMBO
tristate "Qualcomm QMP Combo PHY Driver"
default PHY_QCOM_QMP
depends on TYPEC || TYPEC=n
+ depends on DRM || DRM=n
select GENERIC_PHY
select MFD_SYSCON
+ select DRM_PANEL_BRIDGE if DRM
help
Enable this to support the QMP Combo PHY transceiver that is used
with USB3 and DisplayPort controllers on Qualcomm chips.
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index d1300696d3e1..33cc99d9c77d 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -22,6 +22,8 @@
#include <linux/usb/typec.h>
#include <linux/usb/typec_mux.h>
+#include <drm/drm_bridge.h>
+
#include <dt-bindings/phy/phy-qcom-qmp.h>
#include "phy-qcom-qmp.h"
@@ -1332,6 +1334,8 @@ struct qmp_combo {
struct clk_hw dp_link_hw;
struct clk_hw dp_pixel_hw;
+ struct drm_bridge bridge;
+
struct typec_switch_dev *sw;
enum typec_orientation orientation;
};
@@ -3274,6 +3278,44 @@ static int qmp_combo_typec_switch_register(struct qmp_combo *qmp)
}
#endif
+#if IS_ENABLED(CONFIG_DRM)
+static int qmp_combo_bridge_attach(struct drm_bridge *bridge,
+ enum drm_bridge_attach_flags flags)
+{
+ struct qmp_combo *qmp = container_of(bridge, struct qmp_combo, bridge);
+ struct drm_bridge *next_bridge;
+
+ if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR))
+ return -EINVAL;
+
+ next_bridge = devm_drm_of_get_bridge(qmp->dev, qmp->dev->of_node, 0, 0);
+ if (IS_ERR(next_bridge)) {
+ dev_err(qmp->dev, "failed to acquire drm_bridge: %pe\n", next_bridge);
+ return PTR_ERR(next_bridge);
+ }
+
+ return drm_bridge_attach(bridge->encoder, next_bridge, bridge,
+ DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+}
+
+static const struct drm_bridge_funcs qmp_combo_bridge_funcs = {
+ .attach = qmp_combo_bridge_attach,
+};
+
+static int qmp_combo_dp_register_bridge(struct qmp_combo *qmp)
+{
+ qmp->bridge.funcs = &qmp_combo_bridge_funcs;
+ qmp->bridge.of_node = qmp->dev->of_node;
+
+ return devm_drm_bridge_add(qmp->dev, &qmp->bridge);
+}
+#else
+static int qmp_combo_dp_register_bridge(struct qmp_combo *qmp)
+{
+ return 0;
+}
+#endif
+
static int qmp_combo_parse_dt_lecacy_dp(struct qmp_combo *qmp, struct device_node *np)
{
struct device *dev = qmp->dev;
@@ -3478,6 +3520,10 @@ static int qmp_combo_probe(struct platform_device *pdev)
if (ret)
return ret;
+ ret = qmp_combo_dp_register_bridge(qmp);
+ if (ret)
+ return ret;
+
/* Check for legacy binding with child nodes. */
usb_np = of_get_child_by_name(dev->of_node, "usb3-phy");
if (usb_np) {
--
2.25.1
Powered by blists - more mailing lists