lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 15 May 2023 13:43:59 +0100
From:   Lee Jones <lee@...nel.org>
To:     Sean Nyekjaer <sean@...nix.com>
Cc:     p.paillet@...com, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] mfd: stpmic1: fixup main control register and bits
 naming

On Fri, 28 Apr 2023, Sean Nyekjaer wrote:

> Fixup main control register and bits naming so the match the naming from
> the datasheet.
 
I'm in two minds about this.

On one hand using the names from the datasheet in the right thing to
do, however, on the other hand, the current nomenclature appears clearer.

> https://www.st.com/resource/en/datasheet/stpmic1.pdf
> 
> Signed-off-by: Sean Nyekjaer <sean@...nix.com>
> ---
>  drivers/mfd/stpmic1.c       |  4 ++--
>  include/linux/mfd/stpmic1.h | 12 ++++++------
>  2 files changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/mfd/stpmic1.c b/drivers/mfd/stpmic1.c
> index 8db1530d9bac..4c9b18d9dec8 100644
> --- a/drivers/mfd/stpmic1.c
> +++ b/drivers/mfd/stpmic1.c
> @@ -19,7 +19,7 @@
>  
>  static const struct regmap_range stpmic1_readable_ranges[] = {
>  	regmap_reg_range(TURN_ON_SR, VERSION_SR),
> -	regmap_reg_range(SWOFF_PWRCTRL_CR, LDO6_STDBY_CR),
> +	regmap_reg_range(MAIN_CR, LDO6_STDBY_CR),
>  	regmap_reg_range(BST_SW_CR, BST_SW_CR),
>  	regmap_reg_range(INT_PENDING_R1, INT_PENDING_R4),
>  	regmap_reg_range(INT_CLEAR_R1, INT_CLEAR_R4),
> @@ -30,7 +30,7 @@ static const struct regmap_range stpmic1_readable_ranges[] = {
>  };
>  
>  static const struct regmap_range stpmic1_writeable_ranges[] = {
> -	regmap_reg_range(SWOFF_PWRCTRL_CR, LDO6_STDBY_CR),
> +	regmap_reg_range(MAIN_CR, LDO6_STDBY_CR),
>  	regmap_reg_range(BST_SW_CR, BST_SW_CR),
>  	regmap_reg_range(INT_CLEAR_R1, INT_CLEAR_R4),
>  	regmap_reg_range(INT_SET_MASK_R1, INT_SET_MASK_R4),
> diff --git a/include/linux/mfd/stpmic1.h b/include/linux/mfd/stpmic1.h
> index fa3f99f7e9a1..dc00bac24f5a 100644
> --- a/include/linux/mfd/stpmic1.h
> +++ b/include/linux/mfd/stpmic1.h
> @@ -15,7 +15,7 @@
>  #define RREQ_STATE_SR		0x5
>  #define VERSION_SR		0x6
>  
> -#define SWOFF_PWRCTRL_CR	0x10
> +#define MAIN_CR			0x10
>  #define PADS_PULL_CR		0x11
>  #define BUCKS_PD_CR		0x12
>  #define LDO14_PD_CR		0x13
> @@ -148,14 +148,14 @@
>  #define LDO_BYPASS_MASK			BIT(7)
>  
>  /* Main PMIC Control Register
> - * SWOFF_PWRCTRL_CR
> + * MAIN_CR
>   * Address : 0x10
>   */
> -#define ICC_EVENT_ENABLED		BIT(4)
> +#define OCP_OFF_DBG			BIT(4)
>  #define PWRCTRL_POLARITY_HIGH		BIT(3)
> -#define PWRCTRL_PIN_VALID		BIT(2)
> -#define RESTART_REQUEST_ENABLED		BIT(1)
> -#define SOFTWARE_SWITCH_OFF_ENABLED	BIT(0)
> +#define PWRCTRL_ENABLE			BIT(2)
> +#define RESTART_REQUEST_ENABLE		BIT(1)
> +#define SOFTWARE_SWITCH_OFF		BIT(0)
>  
>  /* Main PMIC PADS Control Register
>   * PADS_PULL_CR
> -- 
> 2.40.0
> 

-- 
Lee Jones [李琼斯]

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ